Yes, the cell capacity should remain the same but as someone rightly pointed out above, the radius of the cell will decrease and hence you will need more cells for the same area of coverage. This would in turn increase the network capacity.
Hi Sathees, The frequencies we are talking about is the Modulating frequency. The data remains the same regardless of the frequency. The modulation translates the data into the frequency to be transmitted and at the receiver side the demodulator receives the sata at the higher frequency and translates it back onto the lower frequency.
An RF engineer should be able to better explain what I have said.
I don't understand this, provided that you can have the same bandwidth, why should capacity change?
ReplyDeleteThe higher the frequency, the lower the propagation of waves assuming constant power. This means smaller cell size.
ReplyDeleteSee also: http://3g4g.blogspot.com/2009/07/800-or-2600mhz-frequency-impact-on.html
Oh yes, the coverage part is clear, my comment was about capacity ;-)
ReplyDeleteDoh! Of course the capacity will remain the same. The capacity part is not correct on the picture.
ReplyDeleteActually, when cell radius decreases, there will be more sites in the network which means more capacity.
ReplyDeleteYes, that's true, but then the comparison is not quite fair, we need a third axis then with the variable $$$ :-)
ReplyDeleteSame bandwidth, Same money, Higher frecuency => less coverage, same capacity.
Hi, Thanks for the Picture !
ReplyDeleteIf we have 10 MHz bandwidth in 900Mhz and 10MHz in 2.3GHz, then capacity of 900MHz and 2.3GHz are the same? Please clarify
Yes, the cell capacity should remain the same but as someone rightly pointed out above, the radius of the cell will decrease and hence you will need more cells for the same area of coverage. This would in turn increase the network capacity.
ReplyDeleteHi, Thanks.
ReplyDelete900 Mhz = 900000 cycles per second,
2300Mhz = 2300000 cycles per second
that means 2.3GHz can carry more data in given time than 900MHz. So according to this, 2.3GHz will get more data rate than lower band..isn't it?
Hi Sathees, The frequencies we are talking about is the Modulating frequency. The data remains the same regardless of the frequency. The modulation translates the data into the frequency to be transmitted and at the receiver side the demodulator receives the sata at the higher frequency and translates it back onto the lower frequency.
ReplyDeleteAn RF engineer should be able to better explain what I have said.