Showing posts with label Huawei. Show all posts
Showing posts with label Huawei. Show all posts

Thursday 29 September 2022

Four Ways 5G Can Improve the Battery Life of User Equipment (UE)

We have looked at different approaches in this blog and the 3G4G website on reducing the power consumption (see related posts below). In a blog post some months back, Huawei highlighted how 5G can improve the battery life of UE. The blog post mentioned four approaches, we have looked at three of them on various blogs. 

The following is from the blog post:

RRC_INACTIVE State

A UE can access network services only if it establishes a radio resource control (RRC) connection with the base station. In legacy RATs, a UE is either in the RRC_CONNECTED state (it has an RRC connection) or the RRC_IDLE state (it does not have an RRC connection). However, transitioning from the RRC_IDLE state to the RRC_CONNECTED state takes a long time, so it cannot meet the low latency requirement of some 5G services. But a UE cannot just stay in the RRC_CONNECTED state because this will consume much more UE power.

To solve this problem, 5G introduces the RRC_INACTIVE state, where the RRC connection is released but the UE context is retained (called RRC Release with Suspend), so an RRC connection can be quickly resumed when needed. This way, a UE in the RRC_INACTIVE state can access low-latency services whenever needed but consume the same amount of power as it does in the RRC_IDLE state.

DRX + WUS

Discontinuous reception (DRX) enables a UE in the RRC_CONNECTED state to periodically, instead of constantly, monitor the physical downlink control channel (PDCCH) to save power. To meet the requirements of different UE services, both short and long DRX cycles can be configured for a UE. However, when to wake up is determined by the predefined cycle, so the UE might wake up unnecessarily when there is no data scheduled.

Is there a way for a UE to wake up only when it needs to? Wake-up Signal (WUS) proposed in Release 16 is the answer. This signal can be sent before the next On Duration period (during which the UE monitors the PDCCH) so that the UE wakes up only when it receives this signal from the network. Because the length of a WUS is shorter than the On Duration Timer, using WUS to wake up a UE saves more power than using only DRX.

BWP Adaptation

In theory, working on a larger bandwidth consumes more UE power. 5G provides large bandwidths, but it is unnecessary for a UE to always work on large bandwidth. For example, if you play online mobile games on a UE, only 10 MHz of bandwidth is needed for 87% of the data transmission time. As such, Bandwidth Part (BWP) is proposed in 5G to enable UEs to work on narrower bandwidths without sacrificing user experience.

BWP adaptation enables the base station to dynamically switch between BWPs based on the UE’s traffic volume. When the traffic volume is large, a UE can work on a wide BWP, and when the traffic volume is small, the UE can work on a narrow one. BWP switching can be performed based on the downlink control information (DCI) and RRC reconfiguration messages. This ensures that a UE always works on a bandwidth that supports the traffic volume but does not consume too much power.

Maximum MIMO Layers Reduction

According to 3GPP specifications, the number of receive and transmit antennas used by a UE cannot be fewer than the maximum number of MIMO layers in the downlink and uplink, respectively. For example, when a maximum of four downlink MIMO layers are configured for a UE, the UE must enable at least four receive antennas to receive data. Therefore, if the maximum number of MIMO layers can be reduced, the UE does not have to activate as many antennas, reducing power consumption.

This can be achieved in 5G because the number of MIMO layers can be re-configured based on assistance information from UEs. After receiving a request to reduce the number of MIMO layers from a UE, the base station configures fewer MIMO layers for the UE through an RRC reconfiguration message. In this way, the UE can deactivate some antennas to save power.

Power consumption in the networks and the devices is a real challenge. While the battery capacity and charging speeds are increasing, it is also important to find ways to optimise the signalling parameters, etc. One such approach can be seen in the tweet above regarding regarding T-Mobile in The Netherlands, selectively switching off a carrier in the night and switching it back when the cell starts loading or in the morning.

We will see lot more innovations and optimisations to dynamically update the technologies, parameters, optimisations to ensure power savings wherever possible.

Related Posts

Tuesday 16 August 2022

Managing 5G Signalling Storms with Service Communication Proxy (SCP)

When we made our 5G Service Based Architecture (SBA) tutorial some four years back, it was based on Release-15 of the 3GPP standards. All Network Functions (NFs) simply sent discovery requests to the Network Repository Function (NRF). While this works great for trials and small scale deployments it can also lead to issues as can be seen in the slide above.

In 3GPP Release-16 the Service Communication Proxy (SCP) has now been introduced to allow the Control Plane network to handle and prioritize massive numbers of requests in real time. The SCP becomes the control point that mediates all Signalling and Control Plane messages in the network core.

SCP routing directs the flow of millions of simultaneous 5G function requests and responses for network slicing, microservice instantiation or edge compute access. It also plays a critical role in optimizing floods of discovery requests to the NRF and in overall Control Plane load balancing, traffic prioritization and message management.

A detailed whitepaper on '5G Signaling and Control Plane Traffic Depends on Service Communications Proxy (SCP)' by Strategy Analytics is available on Huawei's website here. This report was a follow on from the 'Signaling — The Critical Nerve Center of 5G Networks' webinar here.

Related Posts:

Tuesday 2 November 2021

Energy Consumption in Mobile Networks and RAN Power Saving Schemes

We just made a tutorial on this topic looking at where most of the power consumption in the mobile network occurs and some of the ways this power consumption can be reduced. 

The chart in the Tweet above (also in the presentation) clearly shows that the energy costs for operators run in many millions. Small power saving schemes can still have a big impact on the total energy reduction, thereby saving huge amounts of energy and costs.

The March issue of ZTE Communications Magazine contains some good articles looking at how to tackle the energy challenges in the network going forward. This recent article by Ericsson is also a good source of information on this topic.

Anyway, the slides and the video of the tutorial is embedded below:

Related Posts:

Tuesday 24 August 2021

3GPP's 5G-Advanced Technology Evolution from a Network Perspective Whitepaper


China Mobile, along with a bunch of other organizations including China Unicom, China Telecom, CAICT, Huawei, Nokia, Ericsson, etc., produced a white paper on what technology evolutions will we see as part of 5G-Advanced. This comes not so long after the 3GPP 5G-Advanced Workshop which a blogged about here.

The abstract of the whitepaper says:

The commercialization of 5G networks is accelerating globally. From the perspective of industry development drivers, 5G communications are considered the key to personal consumption experience upgrades and digital industrial transformation. Major economies around the world require 5G to be an essential part of long-term industrial development. 5G will enter thousands of industries in terms of business, and technically, 5G needs to integrate DOICT (DT - Data Technology, OT - Operational Technology, IT - Information Technology and CT - Communication Technology) and other technologies further. Therefore, this white paper proposes that continuous research on the follow-up evolution of 5G networks—5G-Advanced is required, and full consideration of architecture evolution and function enhancement is needed.

This white paper first analyzes the network evolution architecture of 5G-Advanced and expounds on the technical development direction of 5G-Advanced from the three characteristics of Artificial Intelligence, Convergence, and Enablement. Artificial Intelligence represents network AI, including full use of machine learning, digital twins, recognition and intention network, which can enhance the capabilities of network's intelligent operation and maintenance. Convergence includes 5G and industry network convergence, home network convergence and space-air-ground network convergence, in order to realize the integration development. Enablement provides for the enhancement of 5G interactive communication and deterministic communication capabilities. It enhances existing technologies such as network slicing and positioning to better help the digital transformation of the industry.

The paper can be downloaded from China Mobile's website here or from Huawei's website here. A video of the paper launch is embedded below:

Nokia's Antti Toskala wrote a blog piece providing the first real glimpse of 5G-Advanced, here.

Related Posts

Tuesday 17 August 2021

'5G RAN Release 18 for Industry Verticals' Webinar Highlights

5G PPP held a virtual workshop on RAN Release 18 for Industry Verticals on June 23rd, 2021. The workshop was organised by 3GPP Market Representation Partners (MRPs): 5G-IA, 5GAA, 5G-ACIA and PSCE.

It features a fireside chat with new 3GPP RAN TSG Chair, Wanshi Chen. In addition to this, the workshop then provides a deep dive on new requirements from verticals, spanning automotive (5GAA), manufacturing (5G-ACIA), critical communications and public safety (TCCA with PSCE), broadcasting and media (5G-MAG), satellite (ESOA), rail (UIC), maritime (IALA) and energy (EUTC).

5G-SOLUTIONS came on board as a 5G PPP project supporting verticals with the 5G-EVE and 5G-VINNI 5G network infrastructures alongside RAN specialists doing standardisation work applicable to multiple verticals.

The video of the webinar is embedded below. In addition, you will find timings of when a particular talk starts and a link to the slides (if shared/available)

Timings:

  • 0:04:21 Fireside chat with Wanshi Chen, Qualcomm and 3GPP RAN TSG Chairman
  • 0:21:00 NTN Requirements in Rel-18 by Nicolas Chuberre, Thales Alenia Space (slides)
  • 0:31:40 Multiple verticals: Andrea Di Giglio, 5G SOLUTIONS (slides)
  • 0:36:35 Media and Broadcasting: David Vargas, BBC and 5G-MAG Chair of CD-T WG, Proposals for 3GPP RAN Rel-18 (slides)
  • 0:43:19 Maritime: Hyounhee Koo, Synctechno and IALA, Maritime Requirements on 3GPP Rel 18 RAN Studies/Works Priorities (slides)
  • 0:46:12 Rail: Ingo Wendler, UIC, NR Narrowband Channel Bandwidth - Railway Use Case (slides)
  • 0:50:02 Utilities: Julian Stafford, EUTC 3GPP RAN Rel-18 Requirements (slides)
  • 0:58:35 Utilities: Erik Guttman, Samsung 5G Smart Energy Infrastructure (slides)
  • 1:05:45 Multiple verticals: Mathew Webb, Huawei and 3GPP RAN 3GPP Release 17 and Release 18 support for industry verticals (slides)
  • 1:15:19 Public Safety/Critical Communications: Tero Pesonen, TCCA Chair, joint presentation with PSCE, 3GPP MRP Mini Workshop: 3GPP Rel 18. Requirements from industry verticals (slides)
  • 1:20:15 Multiple verticals: Thierry Berisot, Novamint and 3GPP RAN, Industry Verticals and Rel-18 RAN (slides)
  • 1:32:56 Manufacturing/IIoT: Michael Bahr, Siemens and 5G-ACIA WG 1Chair and An Xueli, Huawei and 5G-ACIA WG1 Vice Chair 3GPP RAN Rel-18 for Industry Verticals (slides)
  • 1:42:20 Automotive: 5GAA Maxime Flament, CTO Input to RAN 18 Rel-18 Workshop (slides)
  • 1:53:35 Interactive Session 2
  • 2:04:36 Passive IoT for 5G-Advanced, Mathew Webb, Huawei and 3GPP RAN (slides)
  • 2:14:59 Template A for Interactive Session 2
  • 2:20:40 Critical Communications / Public Safety requirements for Release 18 
  • 2:26:00 Closing Remarks

Official page here.

The slide above nicely summarizes 3GPP RAN Verticals up to Release 17.

Related Posts

Monday 12 April 2021

Positioning in 5G networks



I have written about the 5G positioning techniques not that long back on this blog here and on connectivity technology blog here. With Release-16 now ready for deployment, Huawei has already announced world's first in 5G Indoor Positioning. Their announcement said:

China Mobile Suzhou and Huawei reached a new milestone with the verification of the 5G indoor positioning capability in metro transport scenarios in Suzhou — a major city located along the southeastern edge of Jiangsu Province in eastern China. The verification showed that, even with pRRUs being hidden, a positioning precision of 3 to 5 m can be achieved in 90% of the platform and hall areas. This is the first time that 5G indoor positioning has been verified on live networks in the world, providing valuable experience for the commercial growth of 5G positioning in vertical industries.

Indoor location-based services are in high demand of vertical applications, such as indoor navigation, asset tracking, geofencing, logistics management, and personnel management, which reflects the huge market space of indoor positioning. Currently, indoor positioning technologies are of great variety and most of them need to be deployed and maintained individually, resulting in high end-to-end costs. As a part of the continuous evolution of 5G, positioning has been added to 3GPP Release 16 finalized in mid 2020 to realize indoor positioning by leveraging the ultra-high signal resolution empowered by 5G's high bandwidth, multi-point measurements, and multi-access edge computing (MEC) deployment.

The verification was based on Huawei's 5G digital indoor solution LampSite and leading MEC solution. The LampSite units measure the radio signals of 5G devices and work with MEC to analyze the signal characteristics. Based on the results of the analysis, leading algorithms are used to precisely locate 5G devices.

We wrote about Huawei's Lampsite on Telecoms Infrastructure blog last year here.

A group of Ericsson engineers have written a research paper on 5G positioning recently. It's available on arXiv here. Here is the abstract:

In this paper we describe the recent 3GPP Release 16 specification for positioning in 5G networks. It specifies positioning signals, measurements, procedures, and architecture to meet requirements from a plethora of regulatory, commercial and industrial use cases. 5G thereby significantly extends positioning capabilities compared to what was possible with LTE. The indicative positioning performance is evaluated in agreed representative 3GPP simulation scenarios, showing a 90 percentile accuracy of a few meters down to a few decimeters depending on scenarios and assumptions.

Definitely worth a read if you like hardcore technical papers.

Related Posts:

Thursday 4 March 2021

The Fifth Generation Fixed Network (F5G)


Back in Feb 2020, ETSI announced the launch of a new group dedicated to specifying the fifth generation of Fixed Network (ETSI ISG F5G). The press release said:

We are entering an exciting new era of communications, and fixed networks play an essential role in that evolution alongside and in cooperation with mobile networks. Building on previous generations of fixed networks, the 5th generation will address three main use cases, a full-fiber connection, enhanced fixed broadband and a guaranteed reliable experience.

For home scenarios, emerging services such as Cloud VR (virtual reality) and AR (augmented reality) video streaming or online gaming introduce the necessity for ultra-broadband, extremely low latency and zero packet loss. Business scenarios such as enterprise Cloudification, leased line, or POL (Passive Optical LAN) require high reliability and high security. Other industry sectors have specific requirements on the deployment of fiber infrastructures including environmental conditions such as humidity, temperature or electromagnetic interference.

The ETSI ISG F5G aims at studying the fixed-network evolution required to match and further enhance the benefits that 5G has brought to mobile networks and communications. It will define improvements with respect to previous solutions and the new characteristics of the fifth-generation fixed network. This opens up new opportunities by comprehensively applying fiber technology to various scenarios, turning the Fiber to the Home paradigm into Fiber to Everything Everywhere.

ISG F5G considers a wide range of technologies, and therefore seeks to actively cooperate with a number of relevant standardization groups as well as vertical industrial organizations. ISG F5G will address aspects relating to new ODN technologies (Optical Distribution Network), XG(S)-PON and Wi-Fi 6 enhancements, control plane and user plane separation, smart energy efficiency, end-to-end full-stack slicing, autonomous operation and management, synergy of Transport and Access Networks, and adaptation of the Transport Network, amongst others.

The five work items approved last week deal with:

  • F5G use cases: the use cases include services to consumers and enterprises and will be selected based on their impact in terms of new technical requirements identified.
  • Landscape of F5G technology and standards: this work will study technology requirements for F5G use cases, explore existing technologies, and perform the gap analysis.
  • Definition of fixed network generations: to evaluate the driving forces and the path of fixed network evolution, including transport, access and on-premises networks. It will also identify the principal characteristics demarcating different generations and define them.
  • Architecture of F5G: this will specify the end-to-end network architectures, features and related network devices/elements’ requirements for F5G, including on-premises, Access, IP and Transport Networks.
  • F5G quality of experience: to specify the end-to-end quality of experience (QoE) factors for new broadband services. It will analyze the general factors that impact service performance and identify the relevant QoE dimensions for each service.

Then in May, at Huawei Global Analyst Summit 2020 (#HAS2020), Huawei invited global optical industry leaders to discuss F5G Industry development and ecosystem construction, and launched the F5G global industry joint initiative to draw up a grand blueprint for the F5G era. The press conference video is as follows:

Then in September 2020, ETSI released a whitepaper, "The Fifth Generation Fixed Network: Bringing Fibre to Everywhere and Everything"

Now there are couple of standards available that provides more insights.

ETSI GR F5G 001 - Fifth Generation Fixed Network (F5G); F5G Generation Definition Release #1:

In the past, the lack of a clear fixed network generation definition has prevented a wider technology standards adoption and prevented the creation and use of global mass markets. The success of the mobile and cable networks deployments, supported by clear specifications related to particular technological generations, has shown how important this generation definition is.

The focus of the 5th generation fixed networks (F5G) specifications is on telecommunication networks which consist fully of optical fibre elements up to the connection serving locations (user, home, office, base station, etc.). That being said, the connection to some terminals can still be assisted with wireless technologies (for instance, Wi-Fi®).

The main assumption behind the present document foresees that, in the near future, all the fixed networks will adopt end-to-end fibre architectures: Fibre to Everywhere.

The present document addresses the history of fixed networks and summarizes their development paths and driving forces. The factors that influence the definition of fixed, cable and mobile network generations will be analysed. Based upon this, the business and technology characteristics of F5G will be considered.

This table comparing the different generations of fixed networks is interesting too


ETSI GR F5G 002 - Fifth Generation Fixed Network (F5G); F5G Use Cases Release #1:

The present document describes a first set of use cases to be enabled by the Fifth Generation Fixed Network (F5G). These use cases include services to consumers and enterprises as well as functionalities to optimize the management of the Fifth Generation Fixed Network. The use cases will be used as input to a gap analysis and a technology landscape study, aiming to extract technical requirements needed for their implementations. Fourteen use cases are selected based on their impact. The context and description of each use case are presented in the present document.


The use cases as described in the present document are driving the three dimensions of characteristics that are specified in the document on generation definitions [i.1], namely eFBB (enhanced Fixed BroadBand), FFC (Full-Fibre Connection), and GRE (Guaranteed Reliable Experience). Figure 2 shows that:

  • depending on the use case, one or more dimensions are particularly important, and
  • all dimensions of the F5G system architecture are needed to implement the use cases.

I will surely be adding more stuff as and when it is available.

Related Posts:

Monday 14 December 2020

Huawei's Power Digitalization 2025 Summit


Back in October, Huawei held Better World Summit 2020 (a.k.a. "Win-Win Future" Global Online Summit). The theme of this online summit was "Power Digitalization 2025”. Experts and operators shared their ideas, vision and challenges. The following summary was shared by Huawei:

Today, how should global operators respond to opportunities and challenges brought by changes in the digital world, under the rapid development of digital technology and digital economy.

“Energy, as the foundation of the digital world, has become a key part and an important point of competitiveness in the digital economy.” Zhou Taoyuan, President of Digital Power Product Line, Huawei, pointed out that “The entire industry needs to attach greater importance to energy”

With the rapid development of emerging technologies such as 5G, cloud, AI, big data, and the IoT, a digital transformation has kicked off, opening the digital age where things are sensing, connected, and intelligent, "ubiquitous Connected, omnipresent intelligence" is becoming a reality. This has thrown the development of 5G and big data centers into the spotlight. But at the same time, the large-scale and rapid construction of 5G and data centers have brought huge challenges to energy infrastructure, such as increasing energy consumption, long construction periods, and high operation and maintenance costs.

“Pay-as-you-go model is becoming more popular in many countries, as data center owners are looking to a decrease their investment and turn their Capex into Opex. And that goes also for a number of other services as part of running and maintaining data center.” Lilia Severina,Global Major Accounts Director of Uptime Institute,talked about the insights into data center trends at the meeting. “Existing site energy facility cannot meet the power demands of 5G sites. There is a pressing need for reform and innovation in this area.Digitization,intelligent and integrated 5G power system enable faster, more affordable, and simpler 5G network deployment.” Liu Baochang, Deputy Director of Information Energy Department, China Mobile Group Design Institute Co., Ltd, expressed his opinion on the development trend and insights of site power in the 5G era.

Violaine Petit, Sales and Marketing VP of CRT Informatique, shared an interesting case about building data centers of CRT in a castle.“CRT did not just want to build something regular. We wanted to be different. We also wanted to invest in a meaningful project. Based on our business development and rejuvenating the castle, CRT successfully deployed two data centers in the castle to meet the dynamic digital development requirements of government and enterprise users. It can be said that the castle data center not only expands CRT's business boundary, but also can protects the country's cultural heritage, can be said to be two birds with one stone.”

Today, people lead a convenient life because of development of science and technology, while they also worry about the environment. How do we transit towards a net-zero carbon economy? Alberto Carrillo Pineda, Director of Science Based Targets, CDP, has his own view. “This includes changes in policies, technologies, economic structures and patterns of production and consumption, but the most important thing is that we change the way we live today. One of the changes is energy transition. Transitioning from fossil-based to clean and renewable energy and phasing out CO2 emissions in other parts of our economy.”

Zhou Taoyuan said, “Huawei integrates traditional power technologies and digital technologies to achieve power digitalization. In this way, we can use ‘Bit to manage Watt’, and provide simple, green, smart, and reliable digital power solutions to solve challenges faced by traditional power industry. ”

Fang Liangzhou, the Chief Marketing Officer of Huawei Digital Power Product Line, Huawei, said“Huawei uses a target network architecture to guide the planning, construction, O&M, and operation of digital power infrastructure, driving the rapid development of the digital economy. Concerning site power, Huawei proposes implementing 5G without increasing site power-related OPEX, and aims to reduce costs from three aspects as well as tapping into new sources. As for data centers, Huawei proposes a simple, green, smart, and reliable next-generation data center facility that uses the "four reconstructions" initiative to tackle issues such as long data center construction period, high energy consumption, and challenging O&M.”

In the future, Huawei will keep cooperating with global operators to face the challenges and seize the opportunities brought by the digital world. Huawei aims to inject green power into operators and help them grow business sustainably in the future. 

Surprisingly the only video I could find is on Periscope, embedded in the tweet above. You can jump on to the relevant sessions using the timestamps as follows

0:01:20 1. Opening Speech - Zhou Taoyuan, President of Digital Power Product Line, Huawei

0:07:14 2. Building a Net-zero Emissions Economy - Alberto Carrillo Pineda, Director of Science Based Targets, CDP

0:17:18 3. Trend and Insight of Site Power Facility in 5G era - Liu Baochang, Deputy Director of Information Energy Department, China Mobile Group Design Institute Co., Ltd

0:31:30 4. Perspective and Practice of Lithium Battery Application - José Pedro Nascimento, Network Director, Altice Portugal

0:40:10 5. Network Energy-Efficient Operation in EM Market - Li Yao, Deputy Director of NOC, China Mobile Pakistan

0:51:40 6. Trend and Insight of Data Center Facility - Lilia Severina, Global Major Accounts Director of Uptime Institute

1:10:30 7. Prefabricated Modular Data Center Case Sharing - Operator customers

1:16:20 8. Partnering To Power The Digital Datacenter - Violaine Petit, Sales and Marketing VP of CRT Informatique

1:25:10 9. New Era, New Power. PowerX 2025 Target Network - Dr. Fang Liangzhou, CMO of Digital Power Product Line, Huawei

Let me know what you think.

Tuesday 10 November 2020

Network Slicing Tutorials and Other Resources

I have received quite a few requests to do a 5G Network Slicing tutorial but have still not got around to doing it. Luckily there are so many public resources available that I can get away with not doing one on this topic. 


This Award Solutions webinar by Paul Shepherd (embedded below) provides good insights into network slicing, what it is, how it efficiently enables different services in 5G networks, and the architectural changes in 5G required to support it.

Then there is also this myth about 3 slices in the network. The GSMA slice template is a good starting point for an operator looking to do network slicing in their 5G networks. The latest version is 3.0, available here.


As this picture (courtesy of Phil Kendall) shows, it's not a straightforward task.  

Alistair URIE from Nokia Bell Labs points out some common misconceptions people have with Network Slicing:

  1. Multiple slices may share the same cell and the same RU in each slice
  2. Single UE may have up to 8 active slices but must have a single CU-CP instance to terminate the common RRC 
  3. Slicing supports more than 3 slices 

Back in March, China Mobile, Huawei, Tencent, China Electric Power Research Institute, and Digital Domain have jointly released the Categories and Service Levels of Network Slice White Paper to introduce the industry’s first classification of network slice levels. The new white paper dives into the definitions, solutions, typical scenarios, and evolution that make up the five levels of network slices. It serves as an excellent reference to provide guidance in promoting and commercializing network slicing, and lays a theoretical foundation for the industry-wide application of network slicing.

The whitepaper describes the different phases as:

Phase 1 (ready): As mentioned above, the 5G transport network and 5G core network support different software-based and hardware-based isolation solutions. On the 5G NR side, 5QIs (QoS scheduling mechanism) are mainly used to achieve software-based isolation in WAN scenarios. Alternatively, campus-specific 5G NR (including micro base stations and indoor distributed base stations) is used to implement hardware-based isolation in LAN scenarios. In terms of service experience assurance, 5QIs are used to implement differentiated SLA assurance between slices. In terms of slice OAM capabilities, E2E KPIs can be managed in a visualized manner. This means that from 2020 on, Huawei is ready to deliver commercial use of E2E slicing for common customers and VIP customers of the public network and common customer of general industries (such as UHD live broadcast and AR advertisement).

Phase 2 (to be ready in 2021): In terms of isolation, the 5G NR side supports the wireless RB resource reservation technology (including the static reservation and dynamic reservation modes) to implement E2E network resource isolation and slicing in WAN scenarios. In terms of service experience assurance, features such as 5G LAN and 5G TSN are enhanced to implement differentiated and deterministic SLA assurance between different slices. In terms of slice OAM, on the basis of tenant-level KPI visualization, the limited self-service of the industry for rented slices can be further supported. In this phase, operators can serve VIP customers in common industries (such as AR/VR cloud games and drone inspection), dedicated industry customers (such as electric power management information region, medical hospital campus, and industrial campus), and dedicated industry customers (such as electric power production control region and public security).

Phase 3 (to be ready after 2022): In this phase, 5G network slicing supports real dynamic closed-loop SLAs based on AI and negative feedback mechanism, implementing network self-optimization and better serving industries (such as 5G V2X) with high requirements on mobility, roaming, and service continuity. In addition, industry-oriented comprehensive service capabilities will be further enhanced and evolved.

A more technical presentation from Nokia is available here. The video below shows how innovations in IP routing and SDN work together to implement network slicing in the transport domain.

If you know some other good resources and tutorials worth sharing, add them in the comments below.

Related Posts:

Monday 11 May 2020

5G Remote Surgery and Telehealth Solutions


One of the most controversial 5G use cases is the remote surgery. In this post I want to quickly look at the history and what is possible. Before I go to that, here is a short summary video that I am embedding upfront.



As far as I can recall, Ericsson was the first vendor that started talking about remote surgery. This is a tweet from back in 2017.


Huawei didn't want to be far behind so they did one at MWC Shanghai in 2018. Their tweet with video is embedded below.


In January 2019, South China Morning Post (SCMP) showed a video of a remote surgery on an animal. While the video and the article didn't provide many details, I am assuming this was done by Huawei as detailed here. The video of the surgery below.



This was followed by Mobile World Congress 2019 demo where a doctor used 5G to direct surgery live from a stage at MWC to Hospital Clinic Barcelona over 3 miles away. The team of doctors was removing a cancerous tumor from a patient's colon. This video from that is embedded below.



Vodafone New Zealand had a silly remote surgery of a dog video but looks like they have removed it.  Nothing can beat this Telecom Italia ad embedded below.



There are some realistic use cases. One of them being that with 5G the number of cables / wires in a hospital can be reduced saving on the disinfection.
NTT Docomo showcased 5G Mobile SCOT (Smart Cyber Operating Theater) which is an Innovative solution to enable advanced medical treatment in diverse environments. You can read more details here.

There are lots of other things going on. Here is a short list:
  • April 2020: Because of Coronavirus COVID-19, NT Times has an article on Telemedicine Arrives in the U.K.: ‘10 Years of Change in One Week’ - even though this does not involve 5G, it just shows that we are moving in that direction.
  • February 2020: 5G-aided remote CT scans used to diagnose COVID-19 patients in China (link)
  • February 2020: Verizon teamed with Emory Healthcare to test new 5G use cases for the medical industry at the latter’s Innovation Hub in Atlanta, in a bid to discover how the technology can be used to improve patient care. The collaboration will explore applications including connected ambulances; remote physical therapy; medical imaging; and use of AR and VR for training. (link)
  • February 2020: Vodafone 5G Healthcare – Conference & Experience Day (link)
  • November 2019: TIM enables first live remote-surgery consultation using 5G immersive reality (link)
  • October 2019: Along with a hospital in Malaga, Telefónica has presented what it claims is the first expert assistance system for medical interventions that runs on 5G. (link and video)
  • September 2019: Mobile Future Forward 2019 - World's First Remote VR Surgery Demo conducted on Sept 4th, 2019 in Seattle by Chetan Sharma, James Youngquist, Evie Powell, Nissim Hadar, David Colmenares, and Gabe Jones. (link)

Finally, a nice video on Benefits of 5G for Healthcare Technology by T-Mobile



Related Posts:

Friday 20 March 2020

Real-life 5G Use Cases for Verticals from China

GSMA have recently published a series of reports related to China. This includes the 'The Mobile Economy China' report as well as reports on ‘Impacts of mmWave 5G in China’, ‘5G use cases for verticals China 2020’ and ‘Powered by SA case studies’. They are all available here.

China currently has 1.65bn subscribers (Excluding licensed cellular IoT) which is expected to grow to 1.73bn in 2025. The report quotes 1.20bn unique mobile subscribers that is expected to grow to 1.26bn by 2025. With a population of 1.44 billion, this would be assuming everyone over 10 years has a smartphone. 2G and 3G is being phased out so only 4G and 5G will be around in 2025. This would be different for IoT.

The 5G Use Cases for Verticals China 2020 report is comprised of 15 outstanding examples of 5G-empowered applications for verticals, ranging from industrial manufacturing, transportation, electric power, healthcare, education, to content creation, and zooms into the practical scenarios, technical features, and development opportunities for the next generation technology. Every use case represents the relentless efforts of 5G pioneers who are open, cooperative, and innovative.

  1. Flexible Smart Manufacturing with 5G Edge Computing (RoboTechnik, China Mobile, Ericsson)
  2. 5G Smart Campus in Haier Tianjin Washing Machine Factory (China Mobile, Haier)
  3. Aircraft Surface Inspection with 5G and 8K at Commercial Aircraft Corporation of China (Comac, China Unicom, Huawei)
  4. Xinfengming Group’s Smart Factory Based on MEC Technology (Xinfengming, China Mobile, ZTE)
  5. SANY Heavy Industry 5G and Smart Manufacturing (Sany, China Mobile, China Telecom, ZTE)
  6. Xiangtan Iron & Steel's 5G Smart Plant (Xisc, China Mobile, Huawei)
  7. The Tianjin 5G Smart Port (Tianjin, China Unicom, ZTE, Trunk)
  8. 5G Intelligent Connected Vehicle Pilot in Wuhan (China Mobile, Huawei, et al.)
  9. 5G BRT Connected Vehicle-Infrastructure Cooperative System (China Unicom, DTmobile, et al.)
  10. 5G for Smart Grid (China Mobile, Huawei, et al.)
  11. Migu's "Quick Gaming" Platform (China Mobile, et al.)
  12. 5G Cloud VR Demonstration Zone in Honggutan, Nanchang, Jiangxi Province (Besttone, China Telecom, Huawei)
  13. 5G Cloud VR Education Application Based on AI QoE (China Telecom, Nokia, et al.)
  14. China MOOC Conference: 5G + Remote Virtual Simulation Experiment (China Unicom, Vive HTC, Dell Technologies, et al.)
  15. 5G-empowered Hospital Network Architecture Standard (CAICT, China Mobile, China Telecom, China Unicom, Huawei, et al.)

They are all detailed in the report here.

I have written about 5G Use Cases in a blog post earlier, which also contains a video playlist of use cases from around the world. Not many from China in there at the moment but should be added as and when they are available and I discover them.


Related Posts:

Saturday 29 June 2019

Presentations from ETSI Security Week 2019 (#ETSISecurityWeek)


ETSI held their annual Security Week Seminar 17-21 June at their HQ in Sophia Antipolis, France. All the presentations are available here. Here are some I think the audience of this blog will like:


Looks like all presentations were not shared but the ones shared have lots of useful information.


Related Posts:

Tuesday 18 June 2019

3GPP Release-16, Release-17 & Beyond...

6G Summit featured quite a few talks from people looking at evolution beyond Release-16. The future releases will still be 5G, maybe become 5.5G, like 3GPP Release-13 which was known as LTE-Advanced Pro officially was unofficially known as 4.5G.


Back at the 6G Summit in Finland, Dr. Peiying Zhu from Huawei looked at the topics being discussed for Release-17 and beyond.


Thanks to Mika Klemettinen for sharing the pictures on Twitter, as the presentation was not shared.

3GPP is working towards defining Release-16. TS 21.916 - Release description; Release 16 is still not yet available on the 3GPP reflector. Once that is available, we will know for sure about all the Rel-16 changes. Release-17 is long way away. Having said that, there is no shortage of discussions as some of these Rel-17 features were discussed in the recent RAN Plenary.
Jungwon Lee, VP, Samsung also shared a summary of 3GPP Release-16 and Rel-17 features at IEEE 5G Summit in San Diego recently. Quite a few interesting features in all the pictures above that we will no doubt look at in the future posts.

3GPP also shared a presentation recently (embedded below), looking at not only Release-15 & 16 but also looking at focus areas for Release-17




Related Posts and Articles:
  • The 3G4G Blog - Ultra Reliability: 5x9s (99.999%) in 3GPP Release-15 vs 6x9s (99.9999%) in 3GPP Release-16
  • The 3G4G Blog - Update from 3GPP on LTE & 5G Mission Critical Communications
  • 3GPP - Release 16
  • Light Reading - 5G Standards Group Struggles to Balance Tech With Politics
  • Eiko Seidel - 5G Mission Critical Networks (Proximity Services in Rel.17)
  • The 3G4G Blog - Slides and Videos from the 1st 6G Wireless Summit - March 2019
  • The 3G4G Blog - Couple of talks by NTT Docomo on 5G and Beyond (pre-6G)
  • The 3G4G Blog - China Telecom: An examination of the current industrial trends and an outlook of 6G
  • Mission Critical Communications: Mission-Critical Features for Release 17 Discussed at Latest 3GPP Meetings