Rise of the "Thing"

Light Reading carried an interesting cartoon on how M2M works. I wouldnt be surprised if some of the M2M applications at present do work like this. Jokes apart, last week the UK operator EE did a very interesting presentation on Scaling the network for the Rise of the Thing.

A question often asked is "What is the difference between the 'Internet of Things' (IoT) and 'Machine to Machine' (M2M)?". This can generate big discussions and can be a lecture on its own. Quora has a discussion on the same topic here. The picture above from the EE presentation is a good way of showing that M2M is a subset of IoT. 

Its also interesting to note how these 'things' will affect the signalling. I often come across people who tell me that since most M2M devices just use small amounts of data transfer, why is there a need to move from GPRS to LTE. The 2G and 3G networks were designed primarily for Voice with Data secondary function. These networks may work well now but what happens when the predicted 50 Billion connected devices are here by 2020 (or 500 Billion by 2030). The current networks would drown in the control signalling that would often result in congested networks. Congestion control is just one of the things 3GPP is working on for M2M type devices as blogged earlier here. In fact the Qualcomm presentation blogged about before does a decent job of comparing various technologies for IoT, see here.

The EE presentation is embedded as follows:

Scaling the Network - Rise of the Thing from Zahid Ghadialy

Another good example website I was recently made aware of is http://postscapes.com/internet-of-things-examples/ - worth checking how IoT would help us in the future.

LTE for Utilities and Smart Grids

This has been an area of interest for the last couple of years. Discussions have been centred around, "Is LTE fit for IoT?", "Which technology for IoT", "Is it economical to use LTE for M2M?", "Would small cells be useful for M2M?", etc.

Ericsson has recently published a whitepaper titled "LTE for utilities - supporting smart grids". One of the table that caught my eye is as follows:

LTE would be ideally suited for some of the "Performance class" requirements where the transfer time requirements is less than 100ms. Again, it can always be debated if in many cases WiFi will meet the requirements so should WiFi be used instead of LTE, etc. I will let you form your own conclusions and if you are very passionate and have an opinion, feel free to leave comment.

The whitepaper is embedded below:

Related posts:

• Introduction to M2M and its developments in LTE
• From M2M Communications to IoT
• M2M Standardization and its Role for Emerging Smart Cities
• Everything you ever wanted to know about M2M

Making LTE fit for the IoT

Another presentation from the #FWIC2013. This presentation by Vodafone covers some of the areas where the LTE standards are being tweaked for making M2M work with them without issues.

Another area is the access barring that I have blogged about before here. This will become important when we have loads of devices trying to access the network at the same time.

The presentation is embedded below and you can also listen to the audio here.

Making LTE fit for the IoT - Vodafone from Zahid Ghadialy

Present and Future Technologies for Internet of Things (IoT)

An Interesting presentation from our Future of Wireless Conference (#FWIC2013) in Cambridge earlier this month. A question being asked is what technology will be used for Internet of Things (IoT) or Internet of Everything (IoE) as its also referred to nowadays. These 3 slides below summarises what technologies are see applicable to which scenarios.

Complete slides are embedded below and if you like to see the video, its available here.

Mapping the Future of the Internet of (Every)Thing(s) from Zahid Ghadialy

From M2M Communications to IoT

M2M was again in the news recently when a new report suggested that it would be $1 Trillion industry. Back in december I posted a detailed presentation on M2M that has now crossed over 6K views. This shows that there is an appetite for this topic. So here is a three part presentation on M2M and IoT. In fact as I pointed out in a post last year, it is very often referred to as IoE (Internet of Everything) rather than IoT (Internet of Things). If this is a topic close to your heart then please do come to the Future of Wireless International Conference (FWIC) organised by Cambridge Wireless on 1st and 2nd July 2013. Details here.

Connected Lighting of the future

This is an advertisement from Philips about their personal wireless lighting system called Hue. This is also the reason why we say that in future everything would be connected and with its own IP address (though this is not the case in Hue).


With Internet of Things (IoT) becoming more mainstream, it would be interesting to see these things becoming more popular and we will hopefully see more interesting apps.

This article makes an interesting reading too.

Evolution of 'Internet of Things' to 'Internet of Everything' #IoE

Will the 'Internet of Humans' and the 'Internet of Things' (IoT) evolve into 'Internet of Everything' (IoE). This is certainly what Dave Evans, the Cisco Futurist thinks. This is from his blog:


From the Internet of Things (IoT), where we are today, we are just beginning to enter a new realm: the Internet of Everything (IoE), where things will gain context awareness, increased processing power, and greater sensing abilities. Add people and information into the mix and you get a network of networks where billions or even trillions of connections create unprecedented opportunities and give things that were silent a voice.

As more things, people, and data become connected, the power of the Internet (essentially a network of networks) grows exponentially. This thinking (“Metcalfe’s law”) comes from Robert Metcalfe, well-known technologist and founder of 3Com, who stated that the value of a network increases proportionately to the square of the number of users. In essence, the power of the network is greater than the sum of its parts, making the Internet of Everything, incredibly powerful.


You can read more here.

See Also:

• Tech Laws

Imagine the Future - by Cisco

Here is a video from Cisco from the last year, that I think is still relevant to help put in perspective where the future is going:




There is also a slide cast worth watching on the same topic from last month:

The Social Web of Things - Part 2

Here is the Part 1 in case you are wondering.

Gartner Hype Cycle - Internet of Things

Click on the picture to enlarge

Interesting pic showing the Hype Cycle for different technologies. I picked it up from this interesting presentation on Internet Of Things here.

Infographic on 'The Internet of Things'

Very interesting Infographic from Cisco on the 'Internet of Things' that we have discussed before.

Since its not possible for me to put the whole Infographic here, you can check it out on Cisco blogs.

Smart people, dumb objects, networked environments

Nice presentation explaining Internet of Things (IoT).Smart people, dumb objects, networked environments

View more presentations from Zahid Ghadialy

Interesting M2M Video by ETSI

Machine-to Machine Communications - David Boswarthick (15/02/2011) from ETSI – World Class Standards on Vimeo.

ETSI M2M: Building the Internet of Things

Presented by: David Boswarthick, ETSI Technical Expert

Live Presentation during MWC 2011: ETSI stand, Monday, 15 February 2011

_ _ _ _ _ _ _

About the presenter:

David Boswarthick, Technical Officer, ETSI

David has been extensively involved for over 10 years in the standardization activities of mobile, fixed and convergent networks in both the European Telecommunications Standards Institute (ETSI) and the 3rd Generation Partnership Project (3GPP). He is currently involved in the M2M standards group which is defining an end to end architecture and requirements for multiple M2M applications including Smart Metering, healthcare and enhanced home living. David holds a Bachelor's Honours Degree in Telecommunications from the University of Plymouth, and a Master's Degree in Networks and Distributed systems from the University of Nice and Sophia Antipolis, France.

More than 50 Billion Connected Devices

I blogged about the 50 Billion connected devices as predicted by Ericsson last year. With the promised 'Internet of things' and 'connected world' we may see 50 billion devices not too far in the near future. Here is a recent whitepaper from Ericsson on this topic.

Vision 2020 - 50 Billion Connected Devices - Ericsson from Ericsson France

RAN mechanisms to avoid CN overload due to MTC

Machine-to-Machine (M2M) is the future and Machine-type communications (MTC) will be very important once we have billions of connected devices. I have talked in the past about the 50 Billion connected devices by 2050 and the Internet of Things.

One of the challenges of today's networks is to handle this additional signalling traffic due to MTC. One of the very important topics being discussed in 3GPP RAN meetings is 'RAN mechanisms to avoid CN overload due to MTC'. Even though it has not been finalised, its interesting to see the direction in which things are moving.

The above figure from R2-106188 shows that an extended wait time could be added in the RRC Connection Reject/Release message in case if the eNodeB is overloaded. The device can reattempt the connection once the wait time has expired.

In R2-110462, another approach is shown where Core Network (CN) is overloaded. Here a NAS Request message is sent with delay tolerant indicator a.k.a. low priority indicator. If the CN is overloaded then it can reject the request with a backoff timer. Another approach would be to send this info to the eNodeB that can do a RRC Connection Reject when new connection request is received.

All Documents from 3GPP RAN2 #72-bis are available here. Search for NIMTC for M2M related and overload related docs.

6LoWPAN: Low power Wireless Personal Area Networks

From Wikipedia: 6lowpan is an acronym of IPv6 over Low power Wireless Personal Area Networks, or (as the "personal" qualification is no longer relevant), IPv6 over LoW Power wireless Area Networks. 6lowpan is the name of a working group in the internet area of the IETF. The 6lowpan group has defined encapsulation and header compression mechanisms that allow IPv6 packets to be sent to and received from over IEEE 802.15.4 based networks. IPv4 and IPv6 are the work horses for data delivery for local-area networks, metropolitan area networks, and wide-area networks such as the Internet.

There is a book from Wiley entitled "6LoWPAN: The Wireless Embedded Internet", which has a good definition and explanation of 6LoWPAN that I am using below. Wiley has excerpt from the book that details the complete introductory chapter.

As the Internet of routers, servers and personal computers has been maturing, another Internet revolution has been going on – The Internet of Things (see pic below). The vision behind the Internet of Things is that embedded devices, also called smart objects, are universally becoming IP enabled, and an integral part of the Internet. Examples of embedded devices and systems using IP today range from mobile phones, personal health devices and home automation, to industrial automation, smart metering and environmental monitoring systems. The scale of the Internet of Things is already estimated to be immense, with the potential of trillions of devices becoming IP-enabled. The impact of the Internet of Things will be significant, with the promise of better environmental monitoring, energy savings, smart grids, more efficient factories, better logistics, better healthcare and smart homes.

The Internet of Things can be understood as a layer of digital information that covers the physical world. Objects and places become part of the Internet of Things in two ways: First, data and information can be associated with a particular location, using geo-coordinates or a street address. Second with sensors and RFID tags or transmitters installed in these objects allowing then to be accessed via Internet protocols.

Remember, Ericsson has already predicted 50 Billion connected devices by 2050. See here.

The Institute of Electrical and Electronics Engineers (IEEE) released the 802.15.4 lowpower wireless personal area network (WPAN) standard in 2003, which was a major milestone, providing the first global low-power radio standard. Soon after, the ZigBee Alliance developed a solution for ad hoc control networks over IEEE 802.15.4, and has produced a lot of publicity about the applications of wireless embedded technology. ZigBee and proprietary networking solutions that are vertically bound to a link-layer and application profiles only solve a small portion of the applications for wireless embedded networking. They also have problems with scalability, evolvability and Internet integration.

The IEEE 802.15.4 standard released in 2003 was the biggest factor leading to 6LoWPAN standardization. For the first time a global, widely supported standard for lowpower wireless embedded communications was available [IEEE802.15.4]. The popularity of this new standard gave the Internet community the needed encouragement to standardize an IP adaptation for such wireless embedded links.

The ideal use of 6LoWPAN is in applications where:

• embedded devices need to communicate with Internet-based services,

• low-power heterogeneous networks need to be tied together,

• the network needs to be open, reusable and evolvable for new uses and services, and

• scalability is needed across large network infrastructures with mobility.

Connecting the Internet to the physical world enables a wide range of interesting applications where 6LoWPAN technology may be applicable, for example:

• home and building automation

• healthcare automation and logistics

• personal health and fitness

• improved energy efficiency

• industrial automation

• smart metering and smart grid infrastructures

• real-time environmental monitoring and forecasting

• better security systems and less harmful defense systems

• more flexible RFID infrastructures and uses

• asset management and logistics

• vehicular automation

One interesting example application of 6LoWPAN is in facility management, which is the management of large facilities using a combination of building automation, asset management and other embedded systems. This quickly growing field can benefit from 6LoWPAN, is feasible with today’s technology, and has real business demand.

You can read more from the book on Wiley's website here.

More information on purchasing and reviews on Amazon's website below:

Over-the-top (OTT) Applications and Services

I keep on hearing about OTT apps everywhere I go nowadays. I know roughly what they mean but I couldnt find a proper definition anywhere. Here is my attampt to write a bit about what OTT means.

Traditionally lots of services like Voice and Television for example is delivered in a conventional way where Voice was transferred via a PSTN or a Mobile network and similarly TV was delivered via Cable, Satellite, DVB-T kind of technology. With Internet becoming common and Broadband access available to everyone, easily and cheaply, new applications are available to deliver Voice and TV kinds of services. The most popular voice app is for example Skype and Youtube is an example of TV (even though its more like Video On Demand)

These apps cause two main problems. The first problem is that the companies using this traditional medium starts losing customers and their cost per person goes up forcing their profits down. At the same time the amount of data traffic for the ISP increases thereby increasing the number of bits/cent (bits/pence). This forces them to upgrade their infrastructure to provide the same quality of service (QoS).

What this would mean is that in future it would not be possible to get flat rate packages for Mobile broadband or there may be restrictions where certain applications wont run unless you pay extra.

The dilemma for carriers is that LTE’s all-IP architecture will create a more open environment for Over The Top (OTT) applications, including third-party VoIP services, which threaten to further commoditize the network. To overcome this threat and realize revenue gains from LTE, carriers will need to partner with content and application providers, develop application store-fronts such as Apple’s App Store, and perhaps deploy APIs that expose LTE’s value-added network capabilities to third-party application and content developers for a fee.

The only way to ensure profitability in this ‘cost-per-bit’ model is to maximise scale. We have seen this clearly in mobile telephony, where a lack of differentiation has led to intense price pressure, flat rate tariffs and a decoupling of the revenues from the costs. The mobile operator suffers the cost of deploying ever increasing bandwidth while the ‘value’ that this bandwidth enables – the access to over the top (OTT) applications and services benefits the OTT providers.

To avoid this commoditisation, service providers need to add intelligence to the way they deliver these bits. Adopting a ’value-per-bit’ strategy ensures that the value added over and above the simple transport of data is seen and desired by the consumer and by any upstream content or application provider.

This creates a tighter coupling between infrastructure costs and the revenue that infrastructure can attract, thereby ensuring a far more sustainable business model for the service provider. It also benefits consumers and application providers by providing them levels of security, performance and reliability appropriate to the transaction being carried out and the subscribed service.

Most of us wouldn’t dream of paying for a customized Internet experience on a tailor-made device from our broadband service provider. But that is the way we used to buy telephone service, and it continues to be the way we do things for mobile and video services. Over time, all of these businesses will follow a similar pattern, breaking down into their component parts so that the best adapted players win in each piece of the business. The only questions are: “Who are the best adapted?” and “How long will it take?”

Further Reading: Making the Network Relevant in an Over-the-Top World