Quick Summary of LTE Voice Summit 2015 (#LTEVoice)

Last year's summary of the LTE voice summit was very much appreciated so I have created one this year too.

The status of VoLTE can be very well summarised as can be seen in the image above.

‘VoLTE network deployment is the one of the most difficult project ever, the implementation complexity and workload is unparalleled in history’ - China Mobile group vice-president Mr.Liu Aili

Surprisingly, not many presentations were shared so I have gone back to the tweets and the pictures I took to compile this report. You may want to download the PDF from slideshare to be able to see the links. Hope you find it useful.

Related links:

• VoLTE Roaming with RAVEL (Roaming Architecture for Voice over IMS with Local Breakout)
• S8HR: Standardization of New VoLTE Roaming Architecture
• VoLTE Roaming: LBO, S8HR or HBO

LTE vs TETRA for Critical Communications

Sometime back I was reading this interview between Martin Geddes and Peter Clemons on 'The Crisis in UK Critical Communications'. If you haven't read it, I urge you to read it here. One thing that stuck out was as follows:

LTE was not designed for critical communications.

Commercial mobile operators have moved from GSM to UMTS to WCDMA networks to reflect the strong growth in demand for mobile data services. Smartphones are now used for social media and streaming video. LTE technology fulfils a need to supply cheap mass market data communications.

So LTE is a data service at heart, and reflects the consumer and enterprise market shift from being predominantly voice-centric to data-centric. In this wireless data world you can still control quality to a degree. So with OFDM-A modulation we have reduced latency. We have improved how we allocate different resource blocks to different uses.

The marketing story is that we should be able to allocate dedicated resources to emergency services, so we can assure voice communications and group calling even when the network is stressed. Unfortunately, this is not the case. Even the 3GPP standards bodies and mobile operators have recognised that there are serious technology limitations.

This means they face a reputational risk in delivering a like-for-like mission-critical voice service.

Won’t this be fixed by updated standards?

The TETRA Critical Communications association (TCCA) began to engage with the 3GPP standards process in 2012. 3GPP then reached out to peers in the USA and elsewhere: the ESMCP project here in the UK, the US FirstNet programme, and the various European associations.

These lobbied 3GPP for capabilities specifically aimed at critical communications requirements. At the Edinburgh meeting in September 2014, 3GPP set up the SA6specification group, the first new group in a decade.

The hope is that by taking the critical communications requirement into a separate stream, it will no longer hold up the mass market release 12 LTE standard. Even with six meetings a year, this SA6 process will be a long one. By the end of the second meeting it had (as might be expected) only got as far as electing the chairman.

It will take time to scope out what can be achieved, and develop the critical communications functionality. For many players in the 3GPP process this is not a priority, since they are focusing solely on mass market commercial applications.

Similar point was made in another Critical communications blog here:

LTE has emerged as a long term possible replacement for TETRA in this age of mobile broadband and data. LTE offer unrivalled broadband capabilities for such applications as body warn video streaming, digital imaging, automatic vehicle location, computer-assisted dispatch, mobile and command centre apps, web access, enriched e-mail, mobile video surveillance apps such as facial recognition, enhanced Telemetry/remote diagnostics, GIS and many more. However, Phil Kidner, CEO of the TCCA pointed out recently that it will take many LTE releases to get us to the point where LTE can match TETRA on key features such as group working, pre-emptive services, network resilience, call set-up times and direct mode.

The result being, we are at a point where we have two technologies, one offering what end users want, and the other offering what end users need. This has altered the discussion, where now instead of looking at LTE as a replacement, we can look at LTE as a complimentary technology, used alongside TETRA to give end users the best of both worlds. Now the challenge appears to be how we can integrate TETRA and LTE to meet the needs and wants of our emergency services, and it seems that if we want to look for guidance and lessons on the possible harmony of TETRA and LTE we should look at the Middle East.

While I was researching, I came across this interesting presentation (embedded below) from the LTE World Summit 2015





The above is an interesting SWOT (Strengths, Weaknesses, Opportunities and Threats) analysis for TETRA and LTE. While I can understand that LTE is yet unproven, I agree on the lack of spectrum and appropriate bands.

I have been told in the past that its not just the technology which is an issue, TETRA has many functionalities that would need to be duplicated in LTE.



As you can see from this timeline above, while Rel-13 and Rel-14 will have some of these features, there are still other features that need to be included. Without which, safety of the critical communication workers and public could be compromised.

The complete presentation as follows. Feel free to voice your opinions via comments.

Comparing LTE with TETRA etc. digital PMR for Critical Communications from Zahid Ghadialy

New LTE UE Categories: 11, 12, 13 and 14 in 3GPP Rel-12

While checking 3GPP TS 36.306, I noticed some new LTE categories have been defined. We now have all the way up to category 14. I also noticed that Wikipedia page has up to Category 15, not sure how/where they got it from. 

The LG Space page has some more details for anyone interested in exploring further.

A Qualcomm demo from MWC for LTE Category 11, if interested.



Finally, other related posts:

• LTE Category-0 low power M2M devices 
• New LTE-A UE Category 9 and 10 in Rel-11
• LTE-Advanced (Rel-10) UE Categories
• 1200Mbps DL with LTE-Advanced

3GPP Release-13 work started in earnest

The 3GPP news from some months back listed the main RAN features that have been approved for Release-13 and the work has already started on them. The following are the main features (links contain .zip files):

• LTE in unlicensed spectrum (aka Licensed-Assisted Access) - RP-150055
• Carrier Aggregation enhancements - RP-142286
• LTE enhancements for Machine-Type Communications (MTC) - RP-141865
• Enhancements for D2D - RP-142311
• Study Item Elevation Beamforming / Full-Dimension MIMO - RP-141831
• Study Item Enhanced multi-user transmission techniques - RP-142315
• Study Item Indoor positioning - RP-141102
• Study Item Single-cell Point-to-Multipoint (SC-PTM) - RP-142205

Another 3GPP presentation from late last year showed the system features that were being planned for Rel-13 as shown above.

I have also posted a few items earlier relating to Release13, as follows:

• LTE Category-0 low power M2M devices
• Update on Public Safety and Mission Critical communications
• 3GPP Rel-12 and Future Security Work
• Elevation Beamforming / Full-Dimension MIMO
• LA-LTE and LAA
• LTE-Hetnet (LTE-H) a.k.a. LTE Wi-Fi Link Aggregation (LWA)

Ericsson has this week published a whitepaper on release 13, with a vision for 'Networked Society':

The vision of the Networked Society, where everything that benefits from being connected will be connected, places new requirements on connectivity. LTE is a key component in meeting these demands, and LTE release 13 is the next step in the LTE evolution.

Their whitepaper embedded below:

It should be pointed out that 5G work does not start until Release-15 as can be seen from my tweet

Nice picture of "5G Radio Interface development timeline" by @alainmouradUK pic.twitter.com/ANFfujJGS5
— Zahid Ghadialy (@zahidtg) April 4, 2015

xoxoxo Added Later (26/04/2015) xoxoxo
I came across this presentation from Keysight (Agilent) where Moray Rumney has provided information in much more detail.

LTE-Hetnet (LTE-H) a.k.a. LTE Wi-Fi Link Aggregation (LWA)

We have talked about the unlicensed LTE (LTE-U), re-branded as LTE-LAA many times on this blog and the 3G4G Small Cells blog. In fact some analysts have decided to call the current Rel-12 non-standardised Rel-12 version as LTE-U and the standardised version that would be available as part of Release-13 as LTE-LAA.

There is a lot of unease in the WiFi camp because LTE-LAA may hog the 5GHz spectrum that is available as license-exempt for use of Wi-Fi and other similar (future) technologies. Even though LAA may be more efficient as claimed by some vendors, it would reduce the usage for WiFi users in that particular spectrum.

As a result, some vendors have recently proposed LTE/WiFi Link Aggregation as a new feature in Release-13. Alcatel-Lucent, Ruckus Wireless and Qualcomm have all been promoting this. In fact Qualcomm has a pre-MWC teaser video on Youtube. The demo video is embedded as follows:



The Korean operator KT was also involved in demoing this in MWC along with Samsung and Qualcomm. They have termed this feature as LTE-Hetnet or LTE-H.

The Korean analyst firm Netmanias have more detailed technical info on this topic.

Link aggregation by LTE-H demonstrated at MWC 2015 (Source: Netmanias)

As can be seen the data is split/combined in PDCP layer. While this example above shows the practical implementation using C-RAN with Remote Radio Head (RRH) and BaseBand Unit (BBU) being used, the picture at the top shows LTE Anchor in eNodeB. There would be a need for an ideal backhaul to keep latency in the eNodeB to minimum when combining cellular and WiFi data.

Comparison of link level Carrier Aggregation technologies (Source: Netmanias)

The above table shows comparison between the 3 main techniques for increasing data rates through aggregation; CA, LTE-U/LAA and LTE-H/LWA. While CA has been part of 3GPP Release-10 and is available in more of less all new LTE devices, LTE-U and LTE-H is new and would need modifications in the network as well as in the devices. LTE-H would in the end provide similar benefits to LTE-U but is a safer option from devices and spectrum point of view and would be a more agreeable solution by everyone, including the WiFi community.

A final word; last year we wrote a whitepaper laying out our vision of what 4.5G is. I think we put it simply that in 4.5G, you can use WiFi and LTE at the same time. I think LTE-H fulfills that vision much better than other proposals.

LTE Category-0 low power M2M devices

While we have talked about different LTE categories, especially higher speeds, we have not yet discussed Category-0 or Cat-0 for M2M.

A recent news report stated the following:

CAT-1 and CAT-0 are lower speed and power versions of the LTE standard which dramatically extend the addressable market for carriers and chip makers alike. They introduce new IoT targeted features, extend battery operation and lower the cost of adding LTE connectivity.

“While chipsets supporting these lower categories are essential for numerous applications, including wearable devices, smart home and smart metering, there has been an industry development gap that we had anticipated two years ago,” said Eran Eshed, co-founder and vice president of marketing and business development at Altair. “We’ve worked hard to address this gap by being first to market with true CAT-1 and 0 chipsets featuring a power/size/cost combination that is a massive game-changer.”

Ericsson has an interesting presentation that talks about LTE evolution for cellular IoT. While Rel-12 Cat-0 would use the normal allocated bandwidth (upto 20MHz), Rel-13 plans further enhancements to save even more power by reducing the bandwidth to 1.4Mhz. Another possible saving of power comes from the use of Half Duplex (but its optional). There is a very interesting presentation from Mstar semiconductors on half duplex that I have blogged about here. Anyway, the presentation from Ericsson is here:

When we talk about 50 billion M2M devices, a question that I regularly ask is how many of them will be using cellular and how many will use other technologies. Its good to see that my skepticism is shared by others as well, see the tweet below.

@disruptivedean @ericsson Re 2% only cellular, I was discussing this the other day. Too many competing techs. pic.twitter.com/Z7s6wqxkBM
— Zahid Ghadialy (@zahidtg) January 26, 2015

Click on the pic.twitter.com/Z7s6wqxkBM to see the actual media.

Nokia has also got an interesting whitepaper on this topic which talks about optimizing LTE and the architectural evolution that will lead cellular LTE to become a compelling technology so that it can be widely adopted. That paper is embedded as well below.

Nokia LTE M2M: Optimizing LTE for the Internet of Things from Zahid Ghadialy

3G vs 4G Power consumption

I added an answer on Quora but I think there can a a discussion on this. So here it is (embedded). Feel free to let me know what you think.

Read Quote of Zahid Ghadialy's answer to What takes more battery life, between 3G and 4G? on Quora

Additional reading:

• Why LTE sucks (your battery, that is) - Gigaom
• Comparing LTE and 3G Energy Consumption
• Envelope Tracking for improving PA efficiency of mobile devices

Static/Dynamic IP Address Allocation in LTE

I recently came across a discussion on how static and dynamic IP address are allocated in LTE for a UE. Luckily, there is a recent document from Netmanias that discussed this topic. The document is embedded below.

If you enjoyed reading the document (part 1) above, then there is a part 2 here. While in part 1, we saw that IP addresses can be either dynamic or static depending on their allocators, part 2 presents a specific case of IP address allocation – allocation in geographically-separated locations within an LTE network. In case of dynamic allocation, no matter where a user accesses, a dynamically selected P-GW dynamically allocates an IP address to the user for PDN connection. In case of static allocation, however, there is always one specific P-GW and one IP address for a user - the designated P-GW allocates a static IP address for the user’s PDN connection. A case study shows an LTE network that serves two cities as an example to describe different ways and procedures of IP address allocation, and see how they are different from each other.

Voice over WiFi (VoWiFi) technical details

VoWiFi is certainly a hot topic, thanks to the support of VoWiFi on iPhone 6. A presentation from LTE World Summit 2014 by Taqua on this topic has already crossed 13K views. In this post I intend to look at the different approaches for VoWiFi and throw in some technical details. I am by no means an expert so please feel free to add your input in the comments.

Anybody reading this post is not aware of S2a, S2b, Samog, TWAG, ePDG, etc. and what they are, please refer to our whitepaper on cellular and wi-fi integration here (section 3).

There are two approaches to VoWiFi, native client already in your device or an App that could be either downloaded from the app store or pre-installed. The UK operator '3' has an app known as ThreeInTouch. While on WiFi, this app can make and receive calls and texts. The only problem is that it does not handover an ongoing call from WiFi to cellular and and vice versa. Here are a few slides (slides 36-38) from them from a conference last year:

Quick Summary of LTE Voice Summit 2014 #LTEVoice from eXplanoTech

The other operators have a native client that can use Wi-Fi as the access network for voice calls as well as the data when the device is connected on the WLAN.

A simple architecture can be seen from the picture above. As can be seen, the device can connect to the network via a non-3GPP trusted wireless access network via the TWAG or via a non-3GPP untrusted wireless access network via ePDG. In the latter case, an IPSec tunnel would have to be established between the device and the ePDG. The SIM credentials would be used for authentication purposes so that an intruder cannot access ePDG and the core.

Now, I dont want to talk about VoLTE bearers establishment, etc. which I have already done here earlier. In order to establish S2a (trusted) and S2b (untrusted) connection, the AAA server selects an APN among those which are subscribed to in the HLR/HSS. The PDN-GW (generally referred to as PGW) dynamically assigns an IP address out of a pool of addresses which is associated with this APN. This UE IP address is used by the VoWiFi SIP UA (User Agent) as the contact information when registering to the SIP soft switch (which would typically be the operators IMS network).

If for any reason the SIP UA in the device is not able to use the SIM for authentication (needs ISIM?) then a username/password based authentication credentials can be used (SIP digest authentication).

Typically, there would be a seperate UA for VoLTE and VoWiFi. They would both be generally registering to the same IMS APN using different credentials and contact addresses. The IMS network can deal with multiple registrations from the same subscriber but from different IP addresses (see 3GPP TS 23.237 - 'IMS Service Continuity' for details).

Because of multiple UA's, a new element needs to be introduced in order to 'fork' the downstream media streams (RTP/RTCP packets) to different IP addresses over time.

3GPP has defined the Access Transfer Gateway (ATGW) which is controlled by the Access Transfer Control Function (ATCF); the ATCF interfaces to the IMS and Service Centralization and Continuity Application Server (SCC AS). All these are not shown in the picture above but is available in 3GPP TS 23.237. The IMS networks in use today as well as the one being deployed for VoLTE does not have ATGW/ATCF. As a result vendors have to come up with clever non-standardised solutions to solve the problem.

When there is a handover between 3GPP and non-3GPP networks, the UE IP address needs to be preserved. Solutions like MIP and IPSec have been used in the past but they are not flexible. The Release-12 solution of eSAMOG (see 3GPP TS 23.402) can be used but the solution requires changes in the UE. For the time being we will see proprietary solutions only but hopefully in future there would be standardised solutions available.

3GPP TS 23.234 describes more in detail the interworking of 3GPP based system and WLAN. Interested readers can refer to that for further insight.

Enhancing voice services using VoLTE

VoLTE has been a very popular topic on this blog. My overview of the LTE Voice Summit missed out narrowly from the Top 10 posts of 2014 but there were other posts related to VoLTE that made it.

In this magazine article, NTT Docomo not only talks about its own architecture and transition from 3G to 4G for voice and video, it provides some detailed insights from its own experience.

There is also discussion into technical details of the feature and examples of signalling for VoLTE registration and originating/terminating calls (control, session and user plane establishment), SMS, SRVCC, Video over LTE (ViLTE) and voice to video call switching.

The paper is embedded below and available from slideshare to download.

VoLTE for Enhancing Voice Services from Zahid Ghadialy

Related links:

• DOCOMO VoLTE and Next Steps
• VoLTE Roaming with RAVEL (Roaming Architecture for Voice over IMS with Local Breakout)
• 2015 will finally be the year of Voice over LTE (VoLTE)

Detailed whitepaper on Carrier Aggregation by 4G Americas

4G Americas has published a detailed whitepaper on Carrier Aggregation (CA). Its a very good detailed document for anyone wishing to study CA.

Two very important features that have come as part of CA enhancements were the multiple timing advance values that came as a part of Release-11 and TDD-FDD joint operation that came part of Release-12

While its good to see that up to 3 carriers CA is now possible as part of Rel-12 and as I mentioned in my last post, we need this to achieve the 'Real' 4G. We have to also remember at the same time that these CA makes the chipsets very complex and may affect the sensitivity of the RF receivers.

Anyway, here is the 4G Americas whitepaper.

LTE Carrier Aggregation Technology Development and Deployment Worldwide from Zahid Ghadialy

You can read more about the 4G Americas whitepaper in their press release here.

Envelope Tracking for improving PA efficiency of mobile devices

I am sure many people would have heard of ET (Envelope Tracking) by now. Its a technology that can help reduce the power consumption by our mobile devices. Less power consumption means longer battery life, especially with all these new features coming in the LTE-A devices.

As the slide says, there are already 12 phones launched with this technology, the most high profile being iPhone 6/6 Plus. Here is a brilliant presentation from Nujira on this topic:

Envelope Tracking : Fuel injection for the RF Front End from Zahid Ghadialy

For people who are interested in testing this feature may want to check this Rohde&Schwarz presentation here.

Elevation Beamforming / Full-Dimension MIMO

Four major Release-13 projects have been approved now that Release-12 is coming to a conclusion. One of them is Full dimension MIMO. From the 3GPP website:

Leveraging the work on 3D channel modeling completed in Release 12, 3GPP RAN will now study the necessary changes to enable elevation beamforming and high-order MIMO systems. Beamforming and MIMO have been identified as key technologies to address the future capacity demand. But so far 3GPP specified support for these features mostly considers one-dimensional antenna arrays that exploit the azimuth dimension. So, to further improve LTE spectral efficiency it is quite natural to now study two-dimensional antenna arrays that can also exploit the vertical dimension.

Also, while the standard currently supports MIMO systems with up to 8 antenna ports, the new study will look into high-order MIMO systems with up to 64 antenna ports at the eNB, to become more relevant with the use of higher frequencies in the future.

Details of the Study Item can be found in RP-141644.

There was also an interesting post by Eiko Seidel in the 5G standards group:

The idea is to introduce carrier and UE specific tilt/beam forming with variable beam widths. Improved link budget and reduced intra- and inter-cell interference might translate into higher data rates or increased coverage at cell edge. This might go hand in hand with an extensive use of spatial multiplexing that might require enhancements to today’s MU-MIMO schemes. Furthermore in active antenna array systems (AAS) the power amplifiers become part of the antenna further improving the link budget due to the missing feeder loss. Besides a potentially simplified installation the use of many low power elements might also reduce the overall power consumption. 

At higher frequencies the antenna elements can miniaturized and their number can be increased. In LTE this might be limited to 16, 32 or 64 elements while for 5G with higher frequency bands this might allow for “massive MIMO”. 

WG: Primary RAN1 (RP-141644) 
started 06/2014 (RAN#64), completion date 06/2015 (RAN#68)
work item might follow the study with target 12/2015 (RAN#70) 

Supporting companies
Samsung/NSN, all major vendors and operators 

Based on RAN1 Rel.12 Study Item on 3D channel model (TR36.873) 

Objectives 
Phase 1: antenna configurations and evaluation scenarios Rel.12 performance evaluation with 3D channel model 

Phase 2: study and simulate FD-MIMO enhancement identify and evaluate techniques, analyze specification impact performance evaluation for 16, 32, 64 antenna elements enhancements for SU-/MU-MIMO (incl. higher dimension MU-MIMO) (keep the maximum number of layer per UE unchanged to 8)

An old presentation from Samsung is embedded below that will provide more insight into this technology:

Full Dimension MIMO and Beamforming Technologies for B4G from Zahid Ghadialy

Related post:

• 3D-Beamforming and 3D-MIMO

New LTE-A UE Category 9 and 10 in Rel-11

Its been a while since we saw any new UE categories coming but then I noticed some new categories came earlier this year for Release-11. The latest 3TPP TS 36.306 have these new Category 9 and Category 10 as follows.

For those who are aware of the categories of the UE's being used in practice may be aware that the most common ones have been 'Category 3' with 100Mbps max in DL and 50Mbps max in UL. The new 'Cat. 4' devices are becoming more common as more manufacturers start bringing these devices to the market. They support 150Mbps max in DL and 50Mbps max in UL. Neither of them supports Carrier Aggregation.

Having said that, a lot of Cat. 4 devices that we may use in testing actually supports carrier aggregation. The next most popular devices soon to be hitting the market is Cat. 6 UE's with 300Mbps max in DL and 50Mbps max in UL. Category 6 UE's support 2 x 20MHz CA in downlink hence you can say that they can combine 2 x Cat. 4 UE's in DL but they do not support CA in uplink hence the UL part remains the same as Cat. 4 device.

Cat. 9 and 10 are interesting case as Car. 8 was already defined earlier to meet IMT-A requirement as shown below.

To meet IMT-A requirements of peak data rates of 1Gbps in UL and DL, LTE-A had to define category 8 with 5 band CA and 8x8 MIMO to be able to provide 3Gbps max in DL and 1.5Gbps max in UL. No one sees this device becoming a reality in the short term.

The new categories will have to be defined from Cat. 9 onwards.

Cat. 9 allows 3 x Cat. 4 device CA in the downlink to have the maximum possible downlink data rates of 450Mbps but there is no CA in the uplink. As a result, the UL is still 50Mbps max. Cat. 10 allows carrier aggregation in the uplink for upto 2 bands which would result in 100Mbps max in UL.

The LG space website gives a better representation of the same information above which is shown below:

A UE category 9 transmits Rel 11 category 9 + Rel 10 category 6 + Rel 8 category 4

With Release-12 due to be finalised later in the year, we may see new UE categories being defined further.

Multi-Frequency Band Indicator (MFBI)

I am sure we all know that LTE bands have been growing, every few months. All the 32 bands for FDD have now been defined. The 33rd band is where TDD bands start. What if we now want to have more FDD bands? Well, we will have to wait to fix that problem.

Picture Source: LG Space

Anyway, as can be seen in the above picture, some of the frequency bands overlap with each other. Now you may have a UE thats camped onto one frequency that is overlapping in different bands. Wouldn't it be useful to let the UE know that you are camped in more than one band and you can change it to another frequency which may be a different band but you were already on it in the first place (it may sound confusing).

Here is a much simpler table from the specs that show that when a UE is camped on band 5, it may also be camped on bands 18, 19 and 26. Remember the complete bands may not be overlapping but may only be partially overlapping.

An example could be Sprint that used Band 38 TDD (BW 50MHz) for its legacy devices but is now able to use Band 41 (BW 194MHz) as well. The legacy devices may not work on Band 41 but the new devices can use much wider band 41. So the transmission would still say Band 38 but the new devices can be informed of Band 41 using the System Information Block Type 1. AT&T has a similar problem with Band 12 and 17.

Even though this was implemented in Release-8, it came as a part of Late Non-critical extensions. Its a release independent feature but not all UE's and Network have implemented it. The UE indicates the support for MFBI using the FGI (Feature Group Indicator) bits. 

Observed Time Difference Of Arrival (OTDOA) Positioning in LTE

Its been a while I wrote anything on Positioning. The network architecture for the positioning entities can be seen from my old blog post here. 

Qualcomm has recently released a whitepaper on the OTDOA (Observed Time Difference Of Arrival) positioning. Its quite a detailed paper with lots of technical insights.

There is also signalling and example of how reference signals are used for OTDOA calculation. Have a look at the whitepaper for detail, embedded below.

Observed Time Difference Of Arrival (OTDOA) Positioning in 3GPP LTE from Zahid Ghadialy

LA-LTE and LAA

Recently came across a presentation by Ericsson where they used the term LA-LTE. I asked a few colleagues if they knew or could guess what it means and they all drew blank. I have been blogging about Unlicensed LTE (a.k.a. LTE-U) on the Small Cells blog here. This is a re-branding of LTE-U

LA-LTE stands for 'Licensed Access' LTE. In fact the term that has now been adopted in a recent 3GPP workshop (details below) is Licensed Assisted Access (LAA).

Couple of months back I blogged in detail about LTE-U here. Since then, 3GPP held a workshop where some of the things I mentioned got officially discussed. In case you want to know more, details here. I have to mention that the operator community is quite split on whether this is a better approach or aggregating Wi-Fi with cellular a better approach.

The Wi-Fi community on the other hand is unhappy with this approach. If cellular operators start using their spectrum than it means less spectrum for them to use. I wrote a post on the usage of Dynamic Spectrum Access (DSA) Techniques that would be used in such cases to make sure that Wi-Fi and cellular usage does not happen at the same time, leading to interference.

Here is a presentation from the LTE-U workshop on Use cases and scenarios, not very detailed though.

Finally, the summary presentation of the workshop. As it says on the final slide "The current SI proposal focuses on carrier aggregation operations and uses the acronym LAA (Licensed Assisted Access)", you would be seeing more of LAA.

3GPP workshop on LTE in unlicensed spectrum, June 13, 2014: Chairman Summary from Zahid Ghadialy

Case Study: Migrating from WiMAX to TD-LTE

I was glad to hear this case study by Mike Stacey where they have a WiMAX network already deployed and are in process of moving to TD-LTE. Along with the technical issues there are also business and customer issues that need to be taken into account while doing this technology swap. Surprisingly 3.5GHz is also not a very popular band because there are very few deployments in this spectrum. On the other hand, most of the companies worldwide that have been able to get their hands on this spectrum, generally got a big chunk (60-100MHz) so they would be able to do CA easily (bar the technical issues of Intra-band interference).

Anyway, the presentation is embedded below. Hope you find it useful. If you know of similar experiences, please feel free to add them in the comments.

Overcoming Interference Challenges when migrating from WiMAX to LTE from Zahid Ghadialy

Diamater: Market Status, Roaming, NFV and Case Studies

Some more interesting presentations from the Signalling Focus Day of LTE World Summit. Good overview of market by Greg Collins of Exact ventures is embedded below.

Diameter Signaling Market Update from Zahid Ghadialy

A good presentation by Tieto where they presented some good case studies for Diameter Interworking. Presentation embedded below:

Diameter routing & interworking in NFV from Zahid Ghadialy

The final presentation by Diametriq is very interesting because they presented interesting way of mining the control plane. Thee case study presented was of a 'silent roamer' who is not going to spend money while roaming because he is not sure how much money is spent. This can be exploited by the operator to offer flat packages, 1 day pass, etc. to get some revenue from these roamers. Their presentation included some animations that cannot be shown while being embedded. Please download the PPT from Slideshare to view them.

Unlocking New Value in the Diameter Signaling Path from Zahid Ghadialy

International LTE Data and VoLTE Roaming - NTT Docomo

Quick recap of the Bearer Architecture: Remember the interface between S-GW and P-GW is known as S5/S8. S5 in case the S-GW and P-GW are part of the same network (non-roaming case) and S8 in case where P-GW belongs to another network than S-GW (roaming case). The S5/S8 interfaces are generally exactly the same. There is a possibility of different types of S5/S8 interfaces like GTP based and PMIP based but lets not discuss that here.

NTT Docomo published an excellent article in their magazine recently showing the different approaches to International Data roaming.

The different scenarios above are based on the guidelines provided in GSMA PRD IR.88. Each operator has to adopt one of the scenarios above, NTT Docomo has selected scenario 4. The Home PLMN (HPLMN) and the Visited PLMN (VPLMN) connect via IP eXchange (IPX).

As can be seen above, the MME in VPLMN communicates with HSS in HPLMN using Diameter Edge Agent (DEA).

Finally, it is well known that NTT Docomo is not launching VoLTE untill 2015. The above is their proposal on how they handle VoLTE while in Japan and when roaming.

The paper is an interesting read, embedded below:

NTT Docomo: Implementing LTE International Data Roaming from Zahid Ghadialy

Another article worth a read is the VoLTE roaming with RAVEL here.