Thursday 6 August 2020

What about 5G Network Architecture Option 4 (a.k.a. NE-DC) ?

You heard the news about Standalone (SA) 5G network(s)? T-Mobile USA announced this week that "T-Mobile is the first operator in the world to launch a commercial nationwide standalone 5G network". Nationwide is the key word here. Back in February, the Saudi operator STC announced that "stc - Kuwait first to launch 5G E2E SA network in MENA". We will see a lot more announcements about SA 5G this year.


I blogged in detail about the 5G Network Architecture options in this post earlier here. There we looked at the different options in details and typical migration path between the options. Whenever any operator / vendor talks about SA 5G today, they are talking about Option 2. That was back in 2018. Since then, many of the options have lost momentum.

As we all know, the current 5G networks are Non-Standalone or NSA. They are also known as Option 3 or EN-DC. The next evolution is Standalone of SA deployment. It is also known as Option 2. Right now, not many operators or vendors are talking about other options.



While some of the operators have toned down asking for Option 7 (NGEN-DC) & 4 (NE-DC) support, others haven't. Deutsche Telekom is one such operator.


In a webinar on the topic 'The Journey to Standalone 5G' back in March (available on demand here - for DT part, jump to 39 minutes point), Peter Stevens, Principal Engineer, Mobile Access, Deutsche Telekom UK discussed why DT views Option 4 as important for them. In fact if you look at the picture above, you see that they even refer to Option 4 as SA.


One of the motivations from RAN point of view is that because many UEs are not accepting low-low LTE-NR band combinations. So if an operator decided to go with nationwide SA, they have to make the cell sizes smaller than they have to be. This can create coverage gaps with 5G SA. Of course many of the newer features work far better with 5G core (5GC) so option 4 will provide speed benefits of Option 3 NSA without the limitations of 4G EPC.


Standalone without Option 4 can reduce data rates as you can see in the picture above and explained in another of our posts here.


Finally, this last picture summaries the alternatives to Option 4, Dynamic Spectrum Sharing (DSS) or fallback to NSA when 5GC services are not needed. As the slide says, neither of these options is considered a good mainstream alternative to Option 4.

Let me know your thoughts about this in the comments below.

Related Posts:

Saturday 1 August 2020

Artificial Intelligence (AI) / Machine Learning (ML) in 5G Challenge by ITU


ITU is conducting a global ITU AI/ML 5G Challenge on the theme “How to apply ITU's ML architecture in 5G networks". If you don't know the difference between AI & ML, this picture from the old blog post may help.


The ITU website says:

Artificial Intelligence (AI) will be the dominant technology of the future and will impact every corner of society. In particular, AI / ML (machine learning) will shape how communication networks, a lifeline of our society, will be run. Many companies in the ICT sector are exploring how to make best use of AI/ML. ITU has been at the forefront of this endeavour exploring how to best apply AI/ML in future networks including 5G networks. The time is therefore right to bring together the technical community and stakeholders to brainstorm, innovate and solve relevant problems in 5G using AI/ML. Building on its standards work, ITU is conducting a global ITU AI/ML 5G Challenge on the theme “How to apply ITU's ML architecture in 5G networks". 

Participants will be able to solve real world problems, based on standardized technologies developed for ML in 5G networks. Teams will be required to enable, create, train and deploy ML models (such that participants will acquire hands-on experience in AI/ML in areas relevant to 5G). Participation is open to ITU Member States, Sector Members, Associates and Aca​demic Institutions and to any individual from a country that is a member of ITU. ​

There are also some cash prizes, etc. There are various topics with presentation slides & recordings freely available. 

I found the slides from ITU AI/ML in 5G Challenge —”Machine Learning for Wireless LANs + Japan Challenge Introduction” (link) very interesting. There are many other topics including AR / VR / XR, etc, as well.

Have a look at the ITU website here.


Related Posts:

Monday 27 July 2020

Key Technology Aspects of 5G Security by Rohde & Schwarz


The 3G4G page contains a lot of useful papers and links to security here but we have also looked at evolution of security from 4G to 5G here. Rohde & Schwarz has a short 8-minute video in which wireless technology manager, Reiner Stuhlfauth, explains the key technology aspects ensuring 5G security. The video is embedded below.



Related Links:

Sunday 19 July 2020

Mobile Initiated Connection Only (MICO) mode in 5G System


Mobile Initiated Connection Only (MICO) mode is designed for IoT devices that send small amounts of data and do not need to be paged. An example of this could be a smart bin that sends a message to the waste collection company saying it is 50% full, etc. This way the bin emptying lorry can plan to empty it in the next collection round. Here there is no reason to page the bin as there is no mobile terminated data that would be required.

MICO mode has to be negotiated between the device and AMF in 5GC. A device in MICO mode cannot be paged as it would not listen to paging to conserve battery power. This extreme power saving mode can ensure that the battery can last for very long time, ideally years thereby making this vision of billions of connected IoT devices a reality.


In an earlier post on RRC Inactive state, we looked at NAS states, along with RRC states. When the UE is in MICO mode, the AMF in 5GC will consider the UE to be unreachable when it is in CM-IDLE state. In addition, a periodic registration timer is also allocated to the MICO mode UEs. The UE has to confirm the MICO mode again during registration update.

The video and presentation are embedded below:





Related Posts:

Friday 17 July 2020

A Look into 5G Virtual/Open RAN - Part 7: Change of gNB-CU-UP without Handover

This will be the last part of my series about Virtual/Open RAN signaling procedures. In this final post (although not the last one on this blog) I would like to present a very unique procedure that emerges from the facts of virtualization and automation of the RAN. And again I would like to present the big picture overview of the scenario that is called "Change of gNB-CU UP" (without handover). The full message flow (ladder diagram) can be found in 3GPP 38.401, chapter 8.9.5.

In the same chapter one can read that the trigger point for starting a change of the gNB-CU UP is quite vague. 3GPP writes: "e.g. a measurement report". However, which particular measurement event should trigger such a procedure? Even when looking into the Rel. 16 versions of 3GPP 38.331 (NR RRC) it becomes evident that all measurement events that are not dealing with NR sidelink or V2X connectivity are triggered by changing reference signal strength or rising interference. 

However, in case of a gNB-CU UP change without handover the UE does not move to a different cell. This makes me think - correct me if I am wrong - the true trigger points for this procedures come form a different entity, e.g. from the AI-driven policies and algorithms of the RAN Intelligence Controller (RIC) that is a fundamental element of the Open RAN architecture.


So what is necessary from a signaling perspective to change the gNB-CU UP during an ongoing connection?

There are new transport network resources aka GTP/IP-Tunnels required to steer the user plane traffic to and through the RAN. A new F1-U tunnel is necessary as well a a new NG-U tunnel, because also the user plane traffic between RAN and the UPF in the 5G core network must be exchange using a new route.

When it is clear which new UP transport tunnels need to be established (and which old ones need to be deleted) it is really simple to understand the overall scenario.

A F1AP UE Context Modification procedure is performed to switch the F1-U tunnel. NGAP Path Switch procedure is performed to switch the NG-U tunnel. And an E1AP Bearer Context Modification procedure is the prerequisite, because it delivers the new UL GTP-TEID for the F1-U tunnel as well as the new DL GTP-TEID for the NG-U tunnel.

Unfortunately the authors of 3GPP 38.401 are not very precise when mentioning protocol procedures defined in other specs. Thus, they speak about "bearer modification" when looking at F1AP and "Path Update" for NGAP.

It is not a big deal, but something you just need to know if you want to analyze real-world message flows of this scenario.

Related Posts:

Sunday 12 July 2020

Anritsu Webinar on 'Evolution of 5G from 3GPP Rel-15 to Rel-17 and Testing Challenges'


At the TSG#88e Plenary meetings that ended on 03 July 2020, Release 16 was completed with both the Stage 3 freeze and the ASN.1 and OpenAPI specification freeze being approved. The 3GPP Release-16 page has more details on timelines but they may shift. See at the bottom of this post.

Anritsu have uploaded a short presentation on their channel that I am embedding below. I have skipped the beginning part but of you feel like you want to listen, jump to the beginning.




Meanwhile in the recently concluded TSG#88e Plenary meetings, there is a discussion on some of the timelines for Release-17 and Rel-18 moving. This graph below is from SP-200606.


In another piece of 3GPP news, RAN Working Group 6 (WG6 or RAN6) – responsible for the GERAN and UTRAN radio and protocol work - was formally closed.  No new features but specs will be maintained as necessary, of course.

Finally, here is a short video interview by 3GPP in which Balazs Bertenyi looks back at the recent TSG RAN Plenary e-meeting. He talks about the challenges, about IMT-2020, Rel-16 being just on time & the prospects for Rel-17.

Release 16 - RAN progress from 3GPPlive on Vimeo.


Related Posts:

Monday 6 July 2020

A Technical Introduction to 5G NR RRC Inactive State


I looked at the RRC Inactive state back in 2017, but the standards were not completely defined. In the meantime standards have evolved and commercial 5G networks are rolling out left, right and centre. I made a short technical introduction to the RRC_INACTIVE state, comparing it with the 4G states in RRC and NAS. I also looked at some basic signalling examples and there are lots of relevant references at the end. Video and slides embedded below.






Related Posts:

Saturday 4 July 2020

An Introduction to Vehicle to Everything (V2X) and Cellular V2X (C-V2X)


We made an introductory tutorial explaining vehicle to everything. There are 2 different favours of V2X as shown in this tweet below


One is based on IEEE 802.11p (802.11bd in future). It is known by different names, DSRC, ITS-G5, etc. The other is the cellular V2X or C-V2X. It started as basic D2D but has evolved over the time. The slides and video are embedded below but this topic will need revisiting with more details.







Related Posts:

Tuesday 30 June 2020

A Look into 5G Virtual/Open RAN - Part 6: Inter-gNB CU Handover involving Xn

In previous blog posts I have discussed intra-gNB-DU handover and inter-gNB-DU handover scenarios.Now it is time to look at inter-gNB-CU handover that uses the Xn interface.

At the RRC protocol layer there will be the measurement setups and measurement reports as in the intra-gNB handover cases. And F1AP UE Context Setup and Release Procedures are identical with the ones discussed for inter-gNB-DU handover. Only the cause values are expected to be different, e.g. "successful handover".

Thus, I do not want to  focus here on la adder diagram call flow (that is by the way very well described in 3GPP 38.401, chapter 8.9.4), but invite you to have a look at a "big picture" that you see below.

(click image to enlarge)

What characterizes the inter-gNB handover is the transfer of the UE RRC/NGAP context form the source gNB-CU to the target gNB-CU. When the Xn interface is available to connect two neighbor gNBs this context transfer is executed using the XnAP Handover Preparation procedure. The Initiating Message of this procedure transfers the UE context parameters to the target gNB-CU. Then embedded in the Successful Outcome message the handover command is sent in return to the source gNB-CU that forwards it to the UE. In addition a temporary user plane transport tunnel for the purpose of data forwarding is established and later on released on the Xn user plane interface.

Once the UE performed the handover on the radio interface all the transport tunnels for the payload transmission need to be switched from the old gNB to the new one. This includes the tunnel to the UPF that is managed by the NGAP. Thus, the target gNB-CU starts the NGAP Path Switch procedure. 

In the target gNB environment it is necessary to establish a new F1AP UE context, new E1AP Bearer Context and new F1-U payload transport tunnel. All this happens BEFORE the Handover Command is sent to the source gNB/UE. And once there is an indication that the handover is completed all the radio and transport resources controlled by the source gNB will be released.

So the figure above looks complicated, but actually the underlying logic of context/data forwarding, radio resource allocation and transport tunnel switching is quite simple.

Special note: In case there is no Xn interface available the UE context/handover information can be transmitted using NGAP Handover Preparation procedure on the source side of the connection and NGAP Handover Resource Allocation procedure on the target side of the connection.

Related Posts:

Tuesday 23 June 2020

Comparison Layer 2 Measurements LTE vs. 5G NR


Yesterday (2020-06-22) 3GPP uploaded the version 1.0 of TS 38.314 "Layer 2 Measurements" for 5G New Radio Rel. 16.

I was wondering about the difference compared to the same LTE standard defined in 3GPP TS 36.314.

The initial look at the table of contents shows significantly less measurements in the NR spec, but a new counter for the number of stored inactive UE contexts. This is due to the introduction of RRC Inactive state in NR RRC specified in 3GPP TS 38.331)

All other differences in the NR standard are related to chapter number 4.2.1.6 "Other measurements defined in TS 28.552".

Here one finds the references to Data Volume, Average Throughput Measurement per UE and DRB as well as PRB usage measurements.

Adding these additional measurements to the list we see in the table of contents it emerges that indeed the number of stored inactive UE contexts is the only major difference in comparison with the LTE standard.