Friday, October 15, 2010

Network Improvements for Machine Type Communications (NIMTC)

I have blogged about M2M before here.

The Release 10 work item Network Improvements for Machine Type Communications – Stage 1 for NIMTC specified a number of requirements to make the network more suitable for machine type communications. Additional aspects need to be studied before proceeding with their potential inclusion in the normative work.

In the course of the Release 10 work item, it was decided to leave out MTC Device to MTC Device communications from Release 10. This because it was felt it was not possible to do it justice within the Release 10 time frame. Nevertheless, MTC Device to MTC Device communications are expected to become of major importance, especially with consumer devices communicating directly to each other. Therefore, this work item aims to study the network improvements requirements of MTC Device to MTC Device scenarios. A particular aspect of MTC Device to MTC Device scenarios is the identification and functionality needed to set up a connection towards a MTC Device. The IMS domain may provide a solution for this required functionality. In this case the impacts and requirements of MTC on IMS needs to be studied.

Additionally MTC Devices often act as a gateway for a capillary network of other MTC Devices or non-3GPP devices. These gateway MTC Devices may have specific requirements on the mobile network, which have not yet been taken into account in the Release 10 NIMTC work item. Study is needed to determine to what extent improvements are needed and can be specified by 3GPP for MTC Devices that act as a gateway for 'capillary networks' of other devices. Also alignment with what is specified by ETSI TC M2M on this aspect is needed.

Further optimisations may be possible for (groups of) MTC Devices that are co-located. An example of this could be a car with a number of different MTC Devices that always move along together. Optimisations for these kind of scenarios have been suggested, but have not yet been taken into account in the Release 10 NIMTC. Study is needed to determine to what extent network improvements can be specified for co-located MTC Devices.

Because of the different characteristics of Machine-Type Communications, the optimal network for MTC may not be the same as the optimal network for human to human communications. Optimisations of network selections and steering of roaming may be needed. Study is needed to determine to what extent improvements are needed on network selection and steering of roaming for MTC.

Many MTC applications use some kind of location tracking. E.g. the existing LCS framework could be used to provide location information for these kinds of MTC applications. Study is needed to determine to what extent improvements are needed for MTC location tracking.

MTC brings a new concept of a MTC User and MTC Server. So far little attention has been given to service requirements on the communication between the network and the MTC User/MTC Server. Also alignment with what is specified by ETSI TC M2M on that aspect is needed. Study is needed on what kind of service requirements are needed and can be specified by 3GPP.

The Objective of Study on enhancements for Machine-Type Communications item is to study additional requirements, use cases and functionality beyond that specified by the Release 10 NIMTC work item on the following aspects:

network improvements for MTC Device to MTC Device communications via one or more PLMNs. Note: direct-mode communication between devices is out of scope.
possible improvements for MTC Devices that act as a gateway for 'capillary networks' of other devices. Note: capillary networks themselves are out of scope of 3GPP.
network improvements for groups of MTC Devices that are co-located with other MTC Devices
improvements on network selection mechanisms and steering of roaming for MTC devices
possible enhancements to IMS to support MTC
possible improvements for location tracking of MTC Devices
service requirements on communications between PLMN and the MTC User/MTC Server (e.g. how the MTC User can set event to be monitored with MTC Monitoring);
possible service requirements to optimize MTC Devices
possible New MTC Features to further improve the network for MTC

The results of the study will be recorded in a Technical Report. Work ongoing in external standard organization shall be considered (e.g. ETSI M2M, CCSA TC 10).

The European Telecommunications Standards Institute (ETSI) now has a Technical Committee exclusively focused on M2M; the Chinese Communications Standards Association (CCSA) is currently exploring the definition of M2M standards for China and the Geneva-headquartered International Telecommunications Union (ITU) is working on “mobile wireless access systems providing telecommunications for a large number of ubiquitous sensors and/or actuators scattered over wide areas in the land mobile service,” which are at the center of the M2M ecosystem.

Closer to us, the US Telecommunications Industry Association (TIA) has also launched a new engineering committee centered on Smart Device Communications (TIA TR-50). Incidentally, at Global Standards Collaboration 15 (GSC-15), which will be held on August 30- September 2, 2010 in Beijing and hosted by CCSA, the world’s leading telecommunications and radio standards organizations will meet to promote innovation and collaboration on a broad spectrum of standards topics among which M2M has been identified as a “High Interest Subject.”

Related subject on 3GPP here.

M2M workshop is happening in ETSI next week. More details here.

Definitions:

MTC Device: A MTC Device is a UE equipped for Machine Type Communication, which communicates through a PLMN with MTC Server(s) and/or other MTC Device(s).

Local-Access Device: A Local-Access Device is a device in MTC Capillary Network, which has no 3GPP mobile communication capability.

MTC Capillary Network: An MTC Capillary Network is a network of devices that provides local connectivity between devices within its coverage and MTC Gateway Device.

MTC Gateway Device: An MTC Gateway Device is an MTC device equipped for Machine Type Communication, which acts as a gateway for a group of co-located MTC Devices or to connect MTC Devices and/or Local-Access Devices in an MTC Capillary Network to communicate through a PLMN with MTC Server(s), and/or other MTC Device(s).

Further Interesting Reading:



1 comment:

Vidablog said...

Hi,
I'm reading about M2M communication and the security issue of it's network.
In this page what is "release 10 work" you talking about ??

Thx