VoLTE Roaming with RAVEL (Roaming Architecture for Voice over IMS with Local Breakout)

Voice over LTE or VoLTE has many problems to solve. One of the issues that did not have a clear solution initially was Roaming. iBasis has a whitepaper on this topic here, from which the above picture is taken. The following is what is said above:

The routing of international calls has always been a problem for mobile operators. All too often the answer—particularly in the case of ‘tromboning’ calls all the way back to the home network—has been inelegant and costly. LTE data sessions can be broken out locally, negating the need for convoluted routing solutions. But in a VoIMS environment all of the intelligence that decides how to route the call resides in the home network, meaning that the call still has to be routed back.

The industry’s solution to this issue is Roaming Architecture for Voice over LTE with Local Breakout (RAVEL). Currently in the midst of standardisation at 3GPP, RAVEL is intended to enable the home network to decide, where appropriate, for the VoIMS call to be broken out locally. 

Three quarters of respondents to the survey said they support an industry-wide move to RAVEL for VoLTE roaming. This is emphatic in its enthusiasm but 25 per cent remains a significant share of respondents still to be convinced. Just over half of respondents said they plan to support VoIMS for LTE roaming using the RAVEL architecture, while 12.3 per cent said they would support it, but not using RAVEL.

Until RAVEL is available, 27.4 per cent of respondents said they plan to use home-routing for all VoLTE traffic, while just under one fifth said they would use a non-standard VoLTE roaming solution.

Well, the solution was standardised in 3GPP Release-11. NTT Docomo has an excellent whitepaper (embedded below) explaining the issue and the proposed solution.

In 3GPP Release 11, the VoLTE roaming and interconnection architecture was standardized in cooperation with the GSMA Association. The new architecture is able to implement voice call charging in the same way as circuit-switched voice roaming and interconnection models by routing both C-Plane messages and voice data on the same path. This was not possible with the earlier VoLTE roaming and interconnection architecture.

Anyway, here is the complete whitepaper

NTT Docomo: VoLTE Roaming and Interconnection Standard Technology from Zahid Ghadialy