Wireless Charging: A must-have technology with maturing standards

Wireless charging has been in news recently with the discovery that Apple has found a brilliant way to wireless charge iPhones, iPads and iWatches. While we continue to wait for the details of that one, I thought its worth providing a bit of round up from the LTE World Summit not so long back. A summary of market by IHS is embedded as follows:

Qi (pronounced Chee), probably the most well known standard, not just because its already available in devices like Google Nexus 5 phone and Nexus 7 tablet  but also because its 1.2 standard allows devices to be charged from some distance away. They had an excellent presentation outlining their progress and technology as follows:

Finally, any discussion on Wireless Charging wont be complete without the mention of other big player, Alliance For Wireless Power (A4WP). The above shows a comparison between different standards and the presentation from A4WP is as follows:

Finally, if you haven't seen our concept of futuristic 'Smart Batteries' (crossed 10K+ views) then check it out here.

New LTE-A UE Category 9 and 10 in Rel-11

Its been a while since we saw any new UE categories coming but then I noticed some new categories came earlier this year for Release-11. The latest 3TPP TS 36.306 have these new Category 9 and Category 10 as follows.

For those who are aware of the categories of the UE's being used in practice may be aware that the most common ones have been 'Category 3' with 100Mbps max in DL and 50Mbps max in UL. The new 'Cat. 4' devices are becoming more common as more manufacturers start bringing these devices to the market. They support 150Mbps max in DL and 50Mbps max in UL. Neither of them supports Carrier Aggregation.

Having said that, a lot of Cat. 4 devices that we may use in testing actually supports carrier aggregation. The next most popular devices soon to be hitting the market is Cat. 6 UE's with 300Mbps max in DL and 50Mbps max in UL. Category 6 UE's support 2 x 20MHz CA in downlink hence you can say that they can combine 2 x Cat. 4 UE's in DL but they do not support CA in uplink hence the UL part remains the same as Cat. 4 device.

Cat. 9 and 10 are interesting case as Car. 8 was already defined earlier to meet IMT-A requirement as shown below.

To meet IMT-A requirements of peak data rates of 1Gbps in UL and DL, LTE-A had to define category 8 with 5 band CA and 8x8 MIMO to be able to provide 3Gbps max in DL and 1.5Gbps max in UL. No one sees this device becoming a reality in the short term.

The new categories will have to be defined from Cat. 9 onwards.

Cat. 9 allows 3 x Cat. 4 device CA in the downlink to have the maximum possible downlink data rates of 450Mbps but there is no CA in the uplink. As a result, the UL is still 50Mbps max. Cat. 10 allows carrier aggregation in the uplink for upto 2 bands which would result in 100Mbps max in UL.

The LG space website gives a better representation of the same information above which is shown below:

A UE category 9 transmits Rel 11 category 9 + Rel 10 category 6 + Rel 8 category 4

With Release-12 due to be finalised later in the year, we may see new UE categories being defined further.

Multi-Frequency Band Indicator (MFBI)

I am sure we all know that LTE bands have been growing, every few months. All the 32 bands for FDD have now been defined. The 33rd band is where TDD bands start. What if we now want to have more FDD bands? Well, we will have to wait to fix that problem.

Picture Source: LG Space

Anyway, as can be seen in the above picture, some of the frequency bands overlap with each other. Now you may have a UE thats camped onto one frequency that is overlapping in different bands. Wouldn't it be useful to let the UE know that you are camped in more than one band and you can change it to another frequency which may be a different band but you were already on it in the first place (it may sound confusing).

Here is a much simpler table from the specs that show that when a UE is camped on band 5, it may also be camped on bands 18, 19 and 26. Remember the complete bands may not be overlapping but may only be partially overlapping.

An example could be Sprint that used Band 38 TDD (BW 50MHz) for its legacy devices but is now able to use Band 41 (BW 194MHz) as well. The legacy devices may not work on Band 41 but the new devices can use much wider band 41. So the transmission would still say Band 38 but the new devices can be informed of Band 41 using the System Information Block Type 1. AT&T has a similar problem with Band 12 and 17.

Even though this was implemented in Release-8, it came as a part of Late Non-critical extensions. Its a release independent feature but not all UE's and Network have implemented it. The UE indicates the support for MFBI using the FGI (Feature Group Indicator) bits.