Andreas Mueller, Head of communication and network technology at Bosch Corporate Research and Chair of 5G ACIA recently spoke at 'What Next for Wireless Infrastructure Summit' by TelecomTV about Industrial 5G. The following is paraphrased from his presentation 'Industrial 5G: Remaining challenges and future perspectives' which is embedded below:
5G has the potential to become the central nervous system of the factory of the future, enabling unprecedented levels of flexibility, efficiency, productivity and also ease of use. At the same time it's also a very special application domain so in many cases there are very demanding QoS requirements.
Industrial applications have multi-faceted requirements where one case may require very low latencies and high reliabilities for instance, while for others we may need very high data rates (for example HD cameras). There is no single use case with a single set of requirements but many different use cases with very diverse requirements which also have to be supported in many cases at the very same time.
As we need only a local network with local connectivity, this performance is required only in a very controlled environment; inside a factory, inside a plant. This allows for specific optimizations and makes certain things easier but we also always have brownfields deployments in many cases that means we have to live what we have in place today so that's typically wired communication in some cases it's wi-fi and similar wireless solutions and we have to be able to smoothly integrate a 5G network into this existing infrastructure
The developments towards Industrial 5G started about three years ago i would say and in the meantime it really has become a hot topic everybody is talking about industrial 5G. It has become a focused topic in standardization in 3GPP and some key capabilities already have been standardized which have been briefly outlined in the presentation.
Good progress has also been made in the ecosystem development so we've established the 5G Alliance for Connected Industries and Automation two and a half years ago which serves as a global forum for bringing all relevant stakeholders together and for driving industrial 5G and we have 76 members today which includes major players from the telco industry but also from the industrial domain and also of course some universities and so on. We have seen the advent of non-public networks (NPN) so for the first time it will be possible for a manufacturers to deploy and operate such non-public networks inside a factory which are to some extent decoupled from the public networks.
If we look at the standardization timeline this is what you get. The first version of 5G release 15 of 3GPP was approved mid last year and it still had a very strong focus on consumer application and enhanced mobile broadband. If you buy 5G today, this is what you get then. Release-16 has for the first time had a very strong focus on industrial applications this has been approved in June this year and it includes features like ultra reliable low latency communication, non-public networks, time-sensitive communication. It means support for time-sensitive networking 5G and also native layer 2 transport so that we don't necessarily need internet protocol but we can directly transmit ethernet frames over a 5G network which again is very important especially for the industrial domain.
Last week’s TSG Plenary meetings have approved a firm Release-17 timeline. https://t.co/DoHTBQo5ZV pic.twitter.com/MSW8nnZgEA
— 3GPP Live (@3GPPLive) December 14, 2020
Release 17 is currently underway and it will come along with several enhancements of these features. It also has a stronger focus on positioning which is again very important in manufacturing because knowing where things are is a very valuable information and it will be in this new transmission mode called NR RedCap which is somewhere somewhere in between this high-end mobile broadband mode and also this low-end a massive machine type communication and this might be especially suitable for industrial sensors for example and then of course the journey will continue with Release 18 which is still being defined but with a high probability i would say it will more focus on massive iot applications that means tiny little sensors for example which have to be connected using very low energy and low costs and not just the natural next step.
5G NR-RedCap (New Radio Reduced Capability Device) is now the official name of NR-Light (or NR-Lite before that). Assuming this was also being discussed in 3GPP as NR-RedCom (New Radio Reduced Complexity Device) earlier. Can anyone confirm 🤔 pic.twitter.com/WZUaJSgQ8s
— 3G4G (@3g4gUK) December 20, 2020
So many things have been done already towards supporting these industrial applications but if you look at factories today there are only very few of them which already make use of 5g and that's because there are still some challenges to be overcome some of them are listed here first of all having the features in the standard is nice but they also have to be implemented in the chipsets and infrastructure components and that still say test takes some time especially if we consider that really 16 is the first release which really has many of the features that make a difference to the industrial domain
Here is a list of the features that can be prioritised for future 5G releases or even for 6G. As Release-17 has just been delayed slightly, quite possible that some of the features expected in 5G may get pushed on to Beyond 5G and even 6G.Here is the embedded talk
An interview by Dr. Andreas Müller regarding Bosch 5G activities is available here (in German)
Related Posts:
- The 3G4G Blog: 5G and Industry 4.0
- The 3G4G Blog: What is Industrial IoT (IIoT) and how is it different from IoT?
- Free 6G Training: 6G Localization and Sensing – Technologies, Opportunities and Challenges
- The 3G4G Blog - Ultra Reliability: 5x9s (99.999%) in 3GPP Release-15 vs 6x9s (99.9999%) in 3GPP Release-16
- The 3G4G Blog: 5G Private and Non-Public Network (NPN)
- The 3G4G Blog: Real-life 5G Use Cases for Verticals from China
- The 3G4G Blog: Positioning Techniques for 5G NR in 3GPP Release-16
- 3G4G: Introduction to NR-Light a.k.a. NR-Lite
why massive IoT in Release 18?
ReplyDeleteIf you jump to 6 minutes in the video, you can hear what Andreas thinks about it. Right now, there has been no extra focus on these tiny sensors that can send very small amounts of data at some random time. NB-IoT works great but it still requires a reasonable sized battery if you want it to last years. Massive IoT may come up with an even lower power consumption option.
ReplyDeleteThis ties in nicely with this news here, "According to Yu Xiaohui, vice president of the China Academy of Information and Communications Technology (CAICT), eMBB, uRLLC and mMTC will be commercially available from 2021, 2024 and 2026, respectively. "