Showing posts with label UWB. Show all posts
Showing posts with label UWB. Show all posts

Friday, October 8, 2010

Ultrawideband (UWB) based In-building Location Systems

Continuing on yesterdays theme of Location determination. I have heard in couple of presentations that in future based on multiple RF radios that we will carry, we could be uniquely identified on the planet even though there may not be a single device identifying us uniquely.

A similar project as above but for computers is the Panopticlick project which can be found here.


Friday, July 9, 2010

Essentials Of Short Range Wireless Standards

Essentials Of Short Range Wireless Standards presented by Nick Hunn, WiFore Consulting in Short Range Wireless Special Interest Group, 8th July 2010, The Technology Partnership (TTP), Cambridge.

Saturday, March 6, 2010

Bluetooth 4.0 promises to be more successful than Bluetooth 3.0

Apparently the Bluetooth 3.0 has a problem that it consumes too much power so even though the specs have been available for quite some time, they haven't been rolled out.

The Bluetooth Special Interest Group has said that the new version, Bluetooth 4.0, could be launching in the 4th quarter of this year with devices such as headsets, phones and PC’s all getting the technology.

The latest specification allows devices with smaller batteries to utilise Bluetooth. Previous versions of BT required that a device had at lease a AAA or larger capacity battery to function. The new 4.0 specifications allow for smaller devices that require coin-cell batteries to run.

As well as utilising less power, the device also has higher speed data transfer. Version 3.0 was launched last year although it kind of fell flat on it’s face due to the power requirements needed. Version 4.0 fixes those problems.

The new specification will carry the high-speed Wi-Fi feature introduced with Bluetooth 3.0. That allows devices to jump onto Wi-Fi 802.11 networks, where it can transfer data at up to 25Mbits per second.

Hopefully with the lower power requirements and the options to switch to 802.11 networks we should start seeing more devices using the Bluetooth specification.

However, Forrester Research analyst Charles Golvin believes the new standard nonetheless holds considerable appeal.

"These protocols are designed to be very efficient because they are delivering small bits of data," Golvin told PC World, adding that current technologies expended far too much energy to transmit data over short distances. “They'd be like pulling out a cannon to kill a mouse,” Golvin said.

Despite being certified nearly a year ago, the first Bluetooth 3.0+HS devices have yet to appear on the market.

Thursday, February 4, 2010

Bluetooth 3.0 to see the light of day soon

Picture Source: 3g.co.uk and simbasics.co.uk

Remember Bluetooth 3.0? Its been a while and the world has changed in the mean time.

Samsung S8500 will launch next-generation Bluetooth 3.0, a protocol that will establish transfer speeds up to eight times faster than 2.0… 24mbps!

Samsung have not been officially announced yet to carry the Bluetooth 3.0 on the S8500 but the device has been leaked to carry 3.0 Bluetooth connectivity that will dwarf previous 3mbps speeds.

The listing from the Bluetooth Special Interest Group it is slim, compact, will come in several colours, and also contains quad-band GSM/EDGE radios. Other details are scarce, and it’s likely that the spec may change considerably before we get our hands on the actual handset

Broadcom is also focusing on Bluetooth 3.0, which allows Bluetooth-centric designers to use the 802.11 physical layer to provide Wi-Fi-speed data transfers in a Bluetooth environment. Bluetooth 3.0 supports bulk synchronization of music libraries between PCs and music players or phones, supports wireless transfer of photos to printers, and sends video files from cameras or phones to computers or televisions. An alternative for Wi-Fi-centric designers, says Ochikubo, is Wi-Fi Direct, which enables Wi-Fi devices to connect and share data without joining a traditional home, office, or hot-spot network. Whatever approach Broadcom’s customers choose to take, he says, he sees Broadcom’s recently announced InConcert Maestro software platform as making the operation simple and transparent for the end user.

In addition to focusing on the higher speeds that Bluetooth 3.0’s Wi-Fi physical layer affords, the Bluetooth Special Interest Group is also focusing on low-power applications with its “Bluetooth low-energy,” or Bluetooth 4.0, specification. Bluetooth low energy will address markets such as health care, sports and fitness, security, and home entertainment.

Thursday, April 23, 2009

High speed Bluetooth officially announced


From its annual All Hands Meeting in Tokyo this week, the Bluetooth SIG formally adopted Bluetooth Core Specification Version 3.0 High Speed (HS), or Bluetooth 3.0. This latest iteration of the popular short-range wireless technology fulfills the consumers’ need for speed while providing the same wireless Bluetooth experience – faster. Manufacturers of consumer electronics and home entertainment devices can now build their products to send large amounts of video, music and photos between devices wirelessly at speeds consumers expect.

Bluetooth 3.0 gets its speed from the 802.11 radio protocol. The inclusion of the 802.11 Protocol Adaptation Layer (PAL) provides increased throughput of data transfers at the approximate rate of 24 Mbps. In addition, mobile devices including Bluetooth 3.0 will realize increased power savings due to enhanced power control built in.

On March 16, 2009, the WiMedia Alliance announced it is it will transfer all current and future specifications to Bluetooth, and the Wireless USB Forums. After completion of the technology transfer, the WiMedia Alliance will cease operations.

More than eight new Bluetooth enabled products are qualified every working day and more than 19 million Bluetooth units are shipping per week, says the Bluetooth SIG, with over two billion Bluetooth devices in the marketplace.

The Bluetooth SIG includes Promoter group companies Ericsson, Intel, Lenovo, Microsoft, Motorola, Nokia and Toshiba, along with over 11,000 Associate and Adopter member companies. The Bluetooth SIG, Inc. headquarters are located in Bellevue, Washington.

The next-generation Bluetooth is said to operate at similar distances (around 30 feet, best case) to today’s Bluetooth 2.0 but is a lot faster, capable of wireless transfers at a rate of 480Mbps. That’s the amazing 60MB per second, fast enough for high definition videoconferencing or moving files around at a fairly rapid clip.

That kind of speed blows the doors off Bluetooth 2.0, which pokes along at a mere 2.1 Mbps. The new Bluetooth gets its exponentially faster speed by teaming up with ultra wideband technology (UWB). But there are other contenders using similar tech such as Wireless USB (also 480Mbps), and it’s hard to tell how these various protocols will compete with each other, but for sure it is gonna be good for the consumers like us.

Applications

With the availability of Bluetooth version 3.0 HS, consumers can expect to move large data files of videos, music and photos between their own devices and the trusted devices of others, without the need for cables and wires. Some applications consumers will experience include:
  • Wirelessly bulk synchronize music libraries between PC and music player or phone
  • Bulk download photos to a printer or PC
  • Send video files from camera or phone to computer or television

Tuesday, February 19, 2008

Bluetooth Piggybacks WiFi



The popular wireless technology known as Bluetooth could get a lot faster next year by taking advantage of Wi-Fi technology already built into many gadgets.

Linking Bluetooth and Wi-Fi may make it easier and faster to transfer large amounts of music between computers and cell phones, or send pictures from a camera phone to a printer, or video from a camcorder to a TV.

Michael Foley, director of the Bluetooth Special Interest Group, said the first devices with the technology could be on the market in the middle of next year. The industry group behind Bluetooth, which has more than 10,000 member companies, plans to announce Monday that it is pursuing the technology and will make it available next year.

A fast transfer channel for Bluetooth using a different radio technology, ultra-wideband, was announced in 2006, but delays in getting it to work prompted the Bluetooth group to look at Wi-Fi too, Foley said.

Some products, like laptops, already combine Bluetooth and Wi-Fi functions, but they work off separate chips. Most likely, manufacturers will use single chips still under development that combine Bluetooth and Wi-Fi capabilities.

"It does appear that the first products ... are going to be Bluetooth-Wi-Fi, and our members want to take advantage of that," Foley said, adding that all the major makers of Bluetooth chips are participating in the project.
The combination devices will use the regular low-power Bluetooth radios to recognize each other and establish connections. If they need to transfer a large file, they will be able to turn on their Wi-Fi radios, then turn them off to save power after finishing the transfer, Foley said.


The new technology doesn't have a name, and it isn't clear how consumers will be able to tell it apart from Bluetooth-UWB devices, which the industry group still supports.

"This in no way ... changes our vision of using ultra-wideband technology for high speed when that technology is ready," Foley said.

While it started out as a specific radio technology, Bluetooth is turning into an umbrella standard for a variety of different radio technologies. Apart from the high-speed flavors, the SIG has incorporated an ultra-low-power wireless technology developed by Nokia Corp. and previously known as Wibree. Products like watches and pedometers that use that technology are also expected to hit the market next year.

You can also read the Interview of Bluetooth/WiFi Union here.

Personally I think when the UWB platform is fully available, it can support WiFi and Bluetooth 3.0 and then there would be some additional software upgrade for moving between them. Ofcourse the host and the controller both will have to support this new protocol.

Monday, August 13, 2007

Beginning of the Cablefree world


With UWB becoming popular and more devices about to be rolled out, the cable connections between TV, VCR, DVD players, Camcorders, etc can be a thing of past.

In UK, OFCOM removed the restrictions for the use of UWB devices upto a range of 30 metres. In the US and Japan, UWB home hubs are a popular way of sharing domestic broadband.

Ultra-Wideband (UWB) can be used to send huge amounts of information between electronic devices, making it suitable for connecting items such as digital TV decoders and DVD players to television sets, or digital cameras to computers.

It could also be used to wirelessly link satellite dishes or cable TV connections to set-top boxes, doing away with the need for cables to be poked through walls and run around skirting boards. Satellite broadcaster Sky, for instance, is understood to be looking at whether UWB could be integrated into its equipment.

Described by techies as "Bluetooth on steroids", UWB can operate over distances of up to 30 metres. Japanese electronics manufacturers are already producing modems that use UWB, while Cambridge-based chip maker ARM Holdings has deals with several companies that plan to make UWB devices.

Separately, Vodafone yesterday joined the Wimax Forum which is creating standards and specifications for a new longer-range wireless broadband technology. The company stressed that it is taking a neutral stance on the next generation of wireless technologies, but the move raised eyebrows in the mobile phone industry.

Wimax, which can operate over many miles, is seen as a competitor to another next generation wireless technology, which is being developed by the mobile phone companies and builds on the existing 3G standard. LTE, or Long Term Evolution, is an mobile industry-led project designed to upgrade the existing 3G service. The LTE group is supposed to come up with recommendations on a new standard next month.

Earlier this year Vodafone's chief executive Arun Sarin warned that the process of getting a new wireless standard was taking too long. "As an industry it takes us a long time to get things done - we need to move faster or others will eat our lunch," he said.

Meanwhile The European Commission is opening up the wireless technology market by discarding out-dated rules limiting the areas of available radio spectrum. Next-generation wireless technologies such as BlackBerrys and smartphones work best over low frequencies that, until now, were reserved for GSM mobile phones. According to a statement last week, the Commission will allow new services to co-exist alongside GSM. The aim is to establish a more flexible, market-driven approach to spectrum management, says European Union telecoms commissioner Viviane Reding.

Friday, August 3, 2007

Certified Wireless USB is finally here



Two manufacturers of laptop PCs and two designers of wireless hubs and adapters are the first companies to receive consumer product certifications from the Universal Serial Bus Implementers Forum (USB-IF). The Certified Wireless USB products are expected to be in stores for the back-to-school and holiday gift season.

Previously certified silicon from Alereon, Intel Corp., NEC Corp., Realtek Corp., and WiQuest Communications are integrated into the products, according to the USB-IF.


The two laptop companies are Dell Computer for its Inspiron 1720 notebook and Lenovo for its ThinkPad T61/T61p 15.4-inch Widescreen Notebook. Networking companies D-Link and IOGear each had a wireless hub and also an adapter certified. Certification of the Wireless USB protocol by the USB-IF assures the interoperability of devices from a variety of manufacturers.

Certified Wireless USB is based on the WiMedia Alliance's Ultra-WideBand (UWB) common radio platform, which is capable of PHY-layer data rates of 480 Mbit/s at distances up to 3 meters and 110 Mbit/s at up to 10 meters.

From an engineering perspective, the question of co-existence with other wireless technologies in the 3 GHz band has been a persistent question for Wireless USB.


Dell and Lenovo have announced the first notebooks with embedded Certified Wireless USB chips - the Dell Inspiron 1720 and Lenovo ThinkPad T61and T62p. The laptops connect wirelessly to USB peripherals hooked up to Certified Wireless USB hubs such as those released by D-Link and IOGear. They will carry a Certified Wireless USB logo. In the interim, until peripherals catch up with the technology, they will need to be plugged into a wireless USB hub. This will allow the Dell and Lenovo laptops to communicate with a peripheral device such as a conventional printer plugged into the hub.

Sunday, June 24, 2007

Certified Wireless USB's and Cablefree USB



While doing some background sstudy of Wireless USB i came acrosss interesting information. Apparently there are two different Wireless USB standards that are being developed and they are not compatible with each other. More information aas follows:


Wireless USB (also known as Cablefree USB)

* Supported by UWB forum (pioneered by Freescale semiconductor)

* Uses DS-UWB (direct sequence)

* It mimics USB 2.0 in its interfaces to host and peripheral devices, handling the wireless issues within device adapters.

* This approach of retaining the USB 2.0 protocol means that developers can quickly offer products that users can simply plug in without making any system changes.

* Existing USB drivers will work

* The current Freescale UWB chipset operates at 114Mbps with a likely throughput of 50Mbps

Certified Wireless USB

* Supported by WiMedia alliance and USB-IF (USB Implementers Forum)

* Uses OFDM-UWB

* Certified Wireless USB employs a new communications protocol, similar but not identical to USB, to address the wireless issues.

* The Certified Wireless approach, on the other hand, required the definition of a new specification. The initial specification, which its developers released in May 2005, received a supplement defining the association's methods in March 2006. The specifications are now under the control of the USB-IF.

* Will need new software and USB drivers

* They operate at 480Mbps like USB 2.0 with probably similar throughput (peak 320Mbps)