Showing posts with label China Mobile. Show all posts
Showing posts with label China Mobile. Show all posts

Tuesday, August 24, 2021

3GPP's 5G-Advanced Technology Evolution from a Network Perspective Whitepaper


China Mobile, along with a bunch of other organizations including China Unicom, China Telecom, CAICT, Huawei, Nokia, Ericsson, etc., produced a white paper on what technology evolutions will we see as part of 5G-Advanced. This comes not so long after the 3GPP 5G-Advanced Workshop which a blogged about here.

The abstract of the whitepaper says:

The commercialization of 5G networks is accelerating globally. From the perspective of industry development drivers, 5G communications are considered the key to personal consumption experience upgrades and digital industrial transformation. Major economies around the world require 5G to be an essential part of long-term industrial development. 5G will enter thousands of industries in terms of business, and technically, 5G needs to integrate DOICT (DT - Data Technology, OT - Operational Technology, IT - Information Technology and CT - Communication Technology) and other technologies further. Therefore, this white paper proposes that continuous research on the follow-up evolution of 5G networks—5G-Advanced is required, and full consideration of architecture evolution and function enhancement is needed.

This white paper first analyzes the network evolution architecture of 5G-Advanced and expounds on the technical development direction of 5G-Advanced from the three characteristics of Artificial Intelligence, Convergence, and Enablement. Artificial Intelligence represents network AI, including full use of machine learning, digital twins, recognition and intention network, which can enhance the capabilities of network's intelligent operation and maintenance. Convergence includes 5G and industry network convergence, home network convergence and space-air-ground network convergence, in order to realize the integration development. Enablement provides for the enhancement of 5G interactive communication and deterministic communication capabilities. It enhances existing technologies such as network slicing and positioning to better help the digital transformation of the industry.

The paper can be downloaded from China Mobile's website here or from Huawei's website here. A video of the paper launch is embedded below:

Nokia's Antti Toskala wrote a blog piece providing the first real glimpse of 5G-Advanced, here.

Related Posts

Tuesday, November 10, 2020

Network Slicing Tutorials and Other Resources

I have received quite a few requests to do a 5G Network Slicing tutorial but have still not got around to doing it. Luckily there are so many public resources available that I can get away with not doing one on this topic. 


This Award Solutions webinar by Paul Shepherd (embedded below) provides good insights into network slicing, what it is, how it efficiently enables different services in 5G networks, and the architectural changes in 5G required to support it.

Then there is also this myth about 3 slices in the network. The GSMA slice template is a good starting point for an operator looking to do network slicing in their 5G networks. The latest version is 3.0, available here.


As this picture (courtesy of Phil Kendall) shows, it's not a straightforward task.  

Alistair URIE from Nokia Bell Labs points out some common misconceptions people have with Network Slicing:

  1. Multiple slices may share the same cell and the same RU in each slice
  2. Single UE may have up to 8 active slices but must have a single CU-CP instance to terminate the common RRC 
  3. Slicing supports more than 3 slices 

Back in March, China Mobile, Huawei, Tencent, China Electric Power Research Institute, and Digital Domain have jointly released the Categories and Service Levels of Network Slice White Paper to introduce the industry’s first classification of network slice levels. The new white paper dives into the definitions, solutions, typical scenarios, and evolution that make up the five levels of network slices. It serves as an excellent reference to provide guidance in promoting and commercializing network slicing, and lays a theoretical foundation for the industry-wide application of network slicing.

The whitepaper describes the different phases as:

Phase 1 (ready): As mentioned above, the 5G transport network and 5G core network support different software-based and hardware-based isolation solutions. On the 5G NR side, 5QIs (QoS scheduling mechanism) are mainly used to achieve software-based isolation in WAN scenarios. Alternatively, campus-specific 5G NR (including micro base stations and indoor distributed base stations) is used to implement hardware-based isolation in LAN scenarios. In terms of service experience assurance, 5QIs are used to implement differentiated SLA assurance between slices. In terms of slice OAM capabilities, E2E KPIs can be managed in a visualized manner. This means that from 2020 on, Huawei is ready to deliver commercial use of E2E slicing for common customers and VIP customers of the public network and common customer of general industries (such as UHD live broadcast and AR advertisement).

Phase 2 (to be ready in 2021): In terms of isolation, the 5G NR side supports the wireless RB resource reservation technology (including the static reservation and dynamic reservation modes) to implement E2E network resource isolation and slicing in WAN scenarios. In terms of service experience assurance, features such as 5G LAN and 5G TSN are enhanced to implement differentiated and deterministic SLA assurance between different slices. In terms of slice OAM, on the basis of tenant-level KPI visualization, the limited self-service of the industry for rented slices can be further supported. In this phase, operators can serve VIP customers in common industries (such as AR/VR cloud games and drone inspection), dedicated industry customers (such as electric power management information region, medical hospital campus, and industrial campus), and dedicated industry customers (such as electric power production control region and public security).

Phase 3 (to be ready after 2022): In this phase, 5G network slicing supports real dynamic closed-loop SLAs based on AI and negative feedback mechanism, implementing network self-optimization and better serving industries (such as 5G V2X) with high requirements on mobility, roaming, and service continuity. In addition, industry-oriented comprehensive service capabilities will be further enhanced and evolved.

A more technical presentation from Nokia is available here. The video below shows how innovations in IP routing and SDN work together to implement network slicing in the transport domain.

If you know some other good resources and tutorials worth sharing, add them in the comments below.

Related Posts:

Friday, March 20, 2020

Real-life 5G Use Cases for Verticals from China

GSMA have recently published a series of reports related to China. This includes the 'The Mobile Economy China' report as well as reports on ‘Impacts of mmWave 5G in China’, ‘5G use cases for verticals China 2020’ and ‘Powered by SA case studies’. They are all available here.

China currently has 1.65bn subscribers (Excluding licensed cellular IoT) which is expected to grow to 1.73bn in 2025. The report quotes 1.20bn unique mobile subscribers that is expected to grow to 1.26bn by 2025. With a population of 1.44 billion, this would be assuming everyone over 10 years has a smartphone. 2G and 3G is being phased out so only 4G and 5G will be around in 2025. This would be different for IoT.

The 5G Use Cases for Verticals China 2020 report is comprised of 15 outstanding examples of 5G-empowered applications for verticals, ranging from industrial manufacturing, transportation, electric power, healthcare, education, to content creation, and zooms into the practical scenarios, technical features, and development opportunities for the next generation technology. Every use case represents the relentless efforts of 5G pioneers who are open, cooperative, and innovative.

  1. Flexible Smart Manufacturing with 5G Edge Computing (RoboTechnik, China Mobile, Ericsson)
  2. 5G Smart Campus in Haier Tianjin Washing Machine Factory (China Mobile, Haier)
  3. Aircraft Surface Inspection with 5G and 8K at Commercial Aircraft Corporation of China (Comac, China Unicom, Huawei)
  4. Xinfengming Group’s Smart Factory Based on MEC Technology (Xinfengming, China Mobile, ZTE)
  5. SANY Heavy Industry 5G and Smart Manufacturing (Sany, China Mobile, China Telecom, ZTE)
  6. Xiangtan Iron & Steel's 5G Smart Plant (Xisc, China Mobile, Huawei)
  7. The Tianjin 5G Smart Port (Tianjin, China Unicom, ZTE, Trunk)
  8. 5G Intelligent Connected Vehicle Pilot in Wuhan (China Mobile, Huawei, et al.)
  9. 5G BRT Connected Vehicle-Infrastructure Cooperative System (China Unicom, DTmobile, et al.)
  10. 5G for Smart Grid (China Mobile, Huawei, et al.)
  11. Migu's "Quick Gaming" Platform (China Mobile, et al.)
  12. 5G Cloud VR Demonstration Zone in Honggutan, Nanchang, Jiangxi Province (Besttone, China Telecom, Huawei)
  13. 5G Cloud VR Education Application Based on AI QoE (China Telecom, Nokia, et al.)
  14. China MOOC Conference: 5G + Remote Virtual Simulation Experiment (China Unicom, Vive HTC, Dell Technologies, et al.)
  15. 5G-empowered Hospital Network Architecture Standard (CAICT, China Mobile, China Telecom, China Unicom, Huawei, et al.)

They are all detailed in the report here.

I have written about 5G Use Cases in a blog post earlier, which also contains a video playlist of use cases from around the world. Not many from China in there at the moment but should be added as and when they are available and I discover them.


Related Posts:

Wednesday, January 16, 2019

5G Slicing Templates

We looked at slicing not long back in this post here, shared by ITU, from Huawei. The other day I read a discussion on how do you define slicing. Here is my definition:

Network slicing allows sharing of the physical network infrastructure resources into independent virtual networks thereby giving an illusion of multiple logically seperate end-to-end networks, each bound by their own SLAs, service quality and peformance guarantees to meet the desired set of requirements. While it is being officially defined for 5G, there is no reason that a proprietary implementation for earlier generations (2G, 3G or 4G)  or Wi-Fi cannot be created.

The picture above from a China Mobile presentation, explain the slice creation process nicely:

  1. Industry customers order network slices from operators and provide the network requirements, including network slice type, capacity, performance, and related coverage. Operators generate network slices according to their needs. Provide the network service requirement as General Service Template (GST).
  2. Transfer GST to NST (Network Slice Template)
  3. Trigger Network Instantiation Process
  4. Allocate the necessary resources and create the slice.
  5. Expose slice management information. Industry customers obtain management information of ordered slices through open interfaces (such as number of access users, etc.).

For each specific requirement, a slicing template is generated that is translated to an actual slice. Let's look at some examples:

Let's take an example of Power Grid. The picture below shows the scenario, requirement and the network slicing template.
As can be seen, the RAN requirement is timing and low latency while the QoS requirement in the core would be 5 ms latency with guaranteed 2 Mbps throughout. There are other requirements as well. The main transport requirement would be hard isolation.

The Network requirement for AR Gaming is high reliability, low latency and high density of devices. This translates to main RAN requirement of low jitter and latency; Transport requirement of Isolation between TICs (telecom integrated cloud) and finally Core QoS requirement of 80 ms latency and 2 Mbps guaranteed bit rate.


More resources on Network Slicing:


Sunday, March 25, 2018

5G Security Updates - March 2018


Its been a while since I wrote about 5G security in this fast changing 5G world. If you are new to 3GPP security, you may want to start with my tutorial here.

3GPP SA3 Chairman, Anand R. Prasad recently mentioned in his LinkedIn post:

5G security specification finalized! Paving path for new business & worry less connected technology use.

3GPP SA3 delegates worked long hours diligently to conclude the specification for 5G security standard during 26 Feb.-2 Mar. Several obstacles were overcome by focussed effort of individuals & companies from around the globe. Thanks and congrats to everyone!

All together 1000s of hours of work with millions of miles of travel were spent in 1 week to get the work done. This took 8 meetings (kicked off Feb. 2017) numerous on-line meetings and conference calls.

Excited to declare that this tremendous effort led to timely completion of 5G security specification (TS 33.501) providing secure services to everyone and everything!

The latest version of specs is on 3GPP website here.

ITU also held a workshop on 5G Security in Geneva, Switzerland on 19 March 2018 (link). There were quite a few interesting presentations. Below are some slides that caught my attention.

The picture in the tweet above from China Mobile summarises the major 5G security issues very well. 5G security is going to be far more challenging than previous generations.

The presentation by Haiguang Wang, Huawei contained a lot of good technical information. The picture at the top is from that presentation and highlights the difference between 4G & 5G Security Architecture.


New entities have been introduced to make 5G more open.


EPS-AKA vs 5G-AKA (AKA = Authentication and Key Agreement) for trusted nodes


EAP-AKA' for untrusted nodes.


Slice security is an important topic that multiple speakers touched upon and I think it would continue to be discussed for a foreseeable future.

Dr. Stan Wing S. Wong from King’s College London has some good slides on 5G security issues arising out of Multi-Tenancy and Multi-Network Slicing.

Peter Schneider from Nokia-Bell Labs had good slides on 5G Security Overview for Programmable Cloud-Based Mobile Networks

Sander Kievit from TNO, a regular participant of working group SA3 of 3GPP on behalf of the Dutch operator KPN presented a view from 3GPP SA3 on the Security work item progress (slides). The slide above highlights the changes in 5G key hierarchy.

The ITU 5G Security Workshop Outcomes is available here.

ETSI Security Week 2018 will be held 11-15 June 2018. 5G security/privacy is one of the topics.

There is also 5GPPP Workshop on 5G Networks Security (5G-NS 2018), being held in Hamburg, Germany on August 27-30, 2018.

In the meantime, please feel free to add your comments & suggestions below.


Related Posts & Further Reading:

Sunday, February 7, 2016

The Art of Disguising Cellular Antennas

When I did a blog post 'Disguising Small Cells in Rural areas' last year, many people were surprised to see these things. So here is another post showing how the antennas looks like and how they have to be disguised to blend in with the environment.


The above pictures shows fake date trees (with dates) near Koutoubia mosque, Marrakech, designed to blend in with the surroundings. In fact I have been told that these fake date trees are common in the Middle East and North African countries.


The above picture is from Dubai, showing similar palm tree. Source unknown.


The above picture, courtesy of Andy Sutton on Twitter shows a cell site near Blandford Forum. I hope you can spot the fake tree on top right.


Another one, courtesy of Andy Sutton on Twitter shows a cell site between motorway M56, J10 & 11 in Cheshire. Single operator but could be shared, single frequency band, x-pole with 3 cell sectors. Only two of the possible 3 cell sectors connected here. Pointing up and down motorway hence 4 feeders.







Another one courtesy of Andy Sutton on Twitter. Its been disguised to not look out of place unless someone is observing very carefully.
All three are fake trees and each is a separate cellular installation. The location is Lancashire, off the A6 between Slyne and Bolton-le-Sands. They are all different operators, left to right, O2, T-Mobile, Orange - although two will become one as part of EE of course.


Modern Art and Cellular Antenna, courtesy of Andy Sutton on Twitter.

What will happen when we transition to 5G, where we will have a lot more antennas because of MIMO (massive or not). China Mobile is researching into Smart Tiles, which are antennas that can be hidden inside Chinese characters. See the following for example:

With more antennas becoming commonplace in the urban environment, operators and vendors will have to keep up coming with innovative ways to disguise the antennas and hope no one notices.

See Also:


Thursday, January 21, 2016

IET Lecture: 5G – Getting Closer to Answers?


I was fortunate to be able to hear the IET Appleton lecture last week. The good thing about these lectures are that the speakers get plenty of time to talk about the subject of interest and as a result they can cover the topic in much greater depth.

Some interesting tweets from the evening:




Here is the video:
 


As I was sitting in the front, I managed to ask a question - "5G is going to be evolution and revolution. Will it be revolution first then evolution or vice versa". If you cant wait to hear the answer, you can jump to 1:21:30 in the video.

The answer also ties in nicely with my Linkedin post on '5G: Mine is bigger than yours'. 

Sunday, November 1, 2015

Quick Summary of LTE Voice Summit 2015 (#LTEVoice)

Last year's summary of the LTE voice summit was very much appreciated so I have created one this year too.

The status of VoLTE can be very well summarised as can be seen in the image above.
‘VoLTE network deployment is the one of the most difficult project ever, the implementation complexity and workload is unparalleled in history’ - China Mobile group vice-president Mr.Liu Aili
Surprisingly, not many presentations were shared so I have gone back to the tweets and the pictures I took to compile this report. You may want to download the PDF from slideshare to be able to see the links. Hope you find it useful.



Related links:

Tuesday, July 21, 2015

TDD-FDD Joint Carrier Aggregation deployed


As per Analysis Mason, of the 413 commercial LTE networks that have been launched worldwide by the end of 2Q 2015, FD-LTE accounts for 348 (or 84%) of them, while TD-LTE accounts for only 55 (or 13%). Having said that, TD-LTE will be growing in market share, thanks to the unpaired spectrum that many operators secured during the auctions. This, combined with LTE-A Small Cells (as recently demoed by Nokia Networks) can help offload traffic from hotspots.

Light Reading had an interesting summary of TD-LTE rollouts and status that is further summarised below:
  • China Mobile has managed to sign up more than 200 million subscribers in just 19 months, making it the fastest-growing operator in the world today. It has now deployed 900,000 basestations in more than 300 cities. From next year, it is also planning to upgrade to TDD+ which combines carrier aggregation and MIMO to deliver download speeds of up to 5 Gbit/s and a fivefold improvement in spectrum efficiency. TDD+ will be commercially available next year and while it is not an industry standard executives say several elements have been accepted by 3GPP. 
  • SoftBank Japan has revealed plans to trial LTE-TDD Massive MIMO, a likely 5G technology as well as an important 4G enhancement, from the end of the year. Even though it was one of the world's first operators to go live with LTE-TDD, it has until now focused mainly on its LTE-FDD network. It has rolled out 70,000 FDD basestations, compared with 50,000 TDD units. But TDD is playing a sharply increasing role. The operator expects to add another 10,000 TDD basestations this year to deliver additional capacity to Japan's data-hungry consumers. By 2019 at least half of SoftBank's traffic to run over the TDD network.

According to the Analysis Mason article, Operators consider TD-LTE to be an attractive BWA (broadband wireless access) replacement for WiMAX because:

  • most WiMAX deployments use unpaired, TD spectrum in the 2.5GHz and3.5GHz bands, and these bands have since been designated by the 3GPP as being suitable for TD-LTE
  • TD-LTE is 'future-proof' – it has a reasonably long evolution roadmap and should remain a relevant and supported technology throughout the next decade
  • TD-LTE enables operators to reserve paired FD spectrum for mobile services, which mitigates against congestion in the spectrum from fixed–mobile substitution usage profiles.

For people who may be interested in looking further into migrating from WiMAX to TD-LTE, may want to read this case study here.


I have looked at the joint FDD-TDD CA earlier here. The following is from the 4G Americas whitepaper on Carrier Aggregation embedded here.

Previously, CA has been possible only between FDD and FDD spectrum or between TDD and TDD spectrum. 3GPP has finalized the work on TDD-FDD CA, which offers the possibility to aggregate FDD and TDD carriers jointly. The main target with introducing the support for TDD-FDD CA is to allow the network to boost the user throughput by aggregating both TDD and FDD toward the same UE. This will allow the network to boost the UE throughput independently from where the UE is in the cell (at least for DL CA).

TDD and FDD CA would also allow dividing the load more quickly between the TDD and FDD frequencies. In short, TDD-FDD CA extends CA to be applicable also in cases where an operator has spectrum allocation in both TDD and FDD bands. The typical benefits of CA – more flexible and efficient utilization of spectrum resources – are also made available for a combination of TDD and FDD spectrum resources. The Rel-12 TDD-FDD CA design supports either a TDD or FDD cell as the primary cell.

There are several different target scenarios in 3GPP for TDD-FDD CA, but there are two main scenarios that 3GPP aims to support. The first scenario assumes that the TDD-FDD CA is done from the same physical site that is typically a macro eNB. In the second scenario, the macro eNB provides either a TDD and FDD frequency, and the other frequency is provided from a Remote Radio Head (RRH) deployed at another physical location. The typical use case for the second scenario is that the macro eNB provides the FDD frequency and the TDD frequency from the RRH.

Nokia Networks were the first in the world with TDD-FDD CA demo, back in Feb 2014. In fact they also have a nice video here. Surprisingly there wasnt much news since then. Recently Ericsson announced the first commercial implementation of FDD/TDD carrier aggregation (CA) on Vodafone’s network in Portugal. Vodafone’s current trial in its Portuguese network uses 15 MHz of band 3 (FDD 1800) and 20 MHz of band 38 (TDD 2600). Qualcomm’s Snapdragon 810 SoC was used for measurement and testing.

3 Hong Kong is another operator that has revealed its plans to launch FDD-TDD LTE-Advanced in early 2016 after demonstrating the technology on its live network.

The operator used equipment supplied by Huawei to aggregate an FDD carrier in either of the 1800 MHz or 2.6 GHz bands with a TDD carrier in the 2.3 GHz band. 3 Hong Kong also used terminals equipped with Qualcomm's Snapdragon X12 LTE processor.

3 Hong Kong already offers FDD LTE-A using its 1800-MHz and 2.6-GHz spectrum, and is in the midst of deploying TD-LTE with a view to launching later this year.

The company said it expects devices that can support hybrid FDD-TDD LTE-A to be available early next year "and 3 Hong Kong is expected to launch the respective network around that time."

3 Hong Kong also revealed it plans to commercially launch tri-carrier LTE-A in the second half of 2016, and is working to aggregate no fewer than five carriers by refarming its 900-MHz and 2.1-GHz spectrum.

TDD-FDD CA is another tool in the network operators toolbox to help plan the network and make it better. Lets hope more operators take the opportunity to deploy one.

Sunday, June 14, 2015

Using 8T8R Antennas for TD-LTE


People often ask at various conferences if TD-LTE is a fad or is it something that will continue to exist along with the FDD networks. TDD networks were a bit tricky to implement in the past due to the necessity for the whole network to be time synchronised to make sure there is no interference. Also, if there was another TDD network in an adjacent band, it would have to be time synchronised with the first network too. In the areas bordering another country where they might have had their own TDD network in this band, it would have to be time synchronised too. This complexity meant that most networks were happy to live with FDD networks.

In 5G networks, at higher frequencies it would also make much more sense to use TDD to estimate the channel accurately. This is because the same channel would be used in downlink and uplink so the downlink channel can be estimated accurately based on the uplink channel condition. Due to small transmit time intervals (TTI's), these channel condition estimation would be quite good. Another advantage of this is that the beam could be formed and directed exactly at the user and it would appear as a null to other users.

This is where 8T8R or 8 Transmit and 8 Receive antennas in the base station can help. The more the antennas, the better and narrower the beam they can create. This can help send more energy to users at the cell edge and hence provide better and more reliable coverage there.  

SONWav Operator Solution

How do these antennas look like? 8T8R needs 8x Antennas at the Base Station Cell, and this is typically delivered using four X-Polar columns about half wavelength apart. I found the above picture on antenna specialist Quintel's page here, where the four column example is shown right. At spectrum bands such as 2.3GHz, 2.6GHz and 3.5GHz where TD-LTE networks are currently deployed, the antenna width is still practical. Quintel’s webpage also indicates how their technology allows 8T8R to be effectively emulated using only two X-Polar columns thus promising Slimline antenna solutions at lower frequency bands. China Mobile and Huawei have claimed to be the first ones to deploy these four X-Pol column 8T8R antennas. Sprint, USA is another network that has been actively deploying these 8T8R antennas.

There are couple of interesting tweets that show their kit below:

In fact Sprint has very ambitious plans. The following is from a report in Fierce Wireless:

Sprint's deployment of 8T8R (eight-branch transmit and eight-branch receive) radios in its 2.5 GHz TDD LTE spectrum is resulting in increased data throughput as well as coverage according to a new report from Signals Research. "Thanks to TM8 [transmission mode 8] and 8T8R, we observed meaningful increases in coverage and spectral efficiency, not to mention overall device throughput," Signals said in its executive summary of the report.

The firm said it extensively tested Sprint's network in the Chicago market using Band 41 (2.5 GHz) and Band 25 (1.9 GHz) in April using Accuver's drive test tools and two Galaxy Note Edge smartphones. Signals tested TM8 vs. non-TM8 performance, Band 41 and Band 25 coverage and performance as well as 8T8R receive vs. 2T2R coverage/performance and stand-alone carrier aggregation.

Sprint has been deploying 8T8R radios in its 2.5 GHz footprint, which the company has said will allow its cell sites to send multiple data streams, achieve better signal strength and increase data throughput and coverage without requiring more bandwidth.

The company also has said it will use carrier aggregation technology to combine TD-LTE and FDD-LTE transmission across all of its spectrum bands. In its fourth quarter 2014 earnings call with investors in February, Sprint CEO Marcelo Claure said implementing carrier aggregation across all Sprint spectrum bands means Sprint eventually will be able to deploy 1900 MHz FDD-LTE for uplink and 2.5 GHz TD-LTE for downlink, and ultimately improve the coverage of 2.5 GHz LTE to levels that its 1900 MHz spectrum currently achieves. Carrier aggregation, which is the most well-known and widely used technique of the LTE Advanced standard, bonds together disparate bands of spectrum to create wider channels and produce more capacity and faster speeds.

Alcatel-Lucent has a good article in their TECHzine, an extract from that below:

Field tests on base stations equipped with beamforming and 8T8R technologies confirm the sustainability of the solution. Operators can make the most of transmission (Tx) and receiving (Rx) diversity by adding in Tx and Rx paths at the eNodeB level, and beamforming delivers a direct impact on uplink and downlink performance at the cell edge.

By using 8 receiver paths instead of 2, cell range is increased by a factor of 1.5 – and this difference is emphasized by the fact that the number of sites needed is reduced by nearly 50 per cent. Furthermore, using the beamforming approach in transmission mode generates a specific beam per user which improves the quality of the signal received by the end-user’s device, or user equipment (UE). In fact, steering the radiated energy in a specific direction can reduce interference and improves the radio link, helping enable a better throughput. The orientation of the beam is decided by shifting the phases of the Tx paths based on signal feedback from the UE. This approach can deliver double the cell edge downlink throughput and can increase global average throughput by 65 per cent.

These types of deployments are made possible by using innovative radio heads and antenna solutions.  In traditional deployments, it would require the installation of multiple remote radio heads (RRH) and multiple antennas at the site to reach the same level of performance. The use of an 8T8R RRH and a smart antenna array, comprising 4 cross-polar antennas in a radome, means an 8T8R sector deployment can be done within the same footprint as traditional systems.



Anyone interested in seeing pictures of different 8T8R antennas like the one above, see here. While this page shows Samsung's antennas, you can navigate to equipment from other vendors.

Finally, if you can provide any additional info or feel there is something incorrect, please feel free to let me know via comments below.

Sunday, October 6, 2013

China Mobile: A peek at 5G


I was hoping to draw a line under 5G for the time being after a prolonged discussion on my earlier post here and then after clarifying about MSA here. Then this CMCC lecture was brought to my attention and I thought this is a good lecture to listen to so I have embedded the video and slides below. Let me know what you think in the comments below.





Friday, October 5, 2012

3D-Beamforming and 3D-MIMO

When I did the summary from Rel-12 workshop, one of the feature proposed by many companies was the feature on 3D MIMO/Beamforming. Here is a quick introduction from different presentations.




A presentation by China mobile lists the motivations and Challenges is embedded below:





Friday, July 16, 2010

Mobile TV in China not as successful as initially thought


A wise consultant once told me that when the analysts were asking people if they would be interested in Mobile TV, nearly everyone said yes. What they didnt ask is what those people understood by Mobile TV. From a lot of users perspective, Mobile TV meant Youtube which is not what mobile community understands it to be.

Not long back we talked about Mobile and IP TV becoming popular in China. According to recent news in InformationWeek, it falling much short of expectations:

Commercial development of China's mobile TV service is falling far short of expectations. Of the 1.5 million users of China multimedia mobile broadcasting (CMMB), less than 3% are actually paying for the service, creating something of an embarrassment for China Mobile, the main backer of the standard.
CMMB was developed by the State Administration of Radio, Film, and Television (SARFT) based on Satellite and Terrestrial Interactive Multiservice Infrastructure (STiMi) developed by TiMiTech, a company belonging to the Chinese Academy of Broadcasting Science. The standard was announced in October 2006 and is similar to Europe's Digital Video Broadcast-Handheld (DVB-H) broadcasting standard. Since then CMMB has been rigorously promoted by China Mobile and is bundled with its 3G network.
Sources say that by the end of the second quarter, 2010 domestic sales of CMMB handsets were around 1.5 million, approximately 30% of total 3G mobile phone sales at China Mobile, and much lower than the 50% target set by the operators. The service has been operational for more than a year but formal fees have only recently been introduced, which range from $1 to $3 per month. The small take-up of the service since fees were introduced does not bode well for the future of mobile television in China.
China Mobile was hoping to attract more paying customers with its World Cup offering, but this may have been wishful thinking. Analysts believe that the company's broadcasting and mobile communications divisions are lacking in unified policy and have no clear development path.
With widespread proliferation of cheaper "shanzhai" -- or copycat -- handsets, it is difficult to reach all potential customers. The CMMB technology is expensive and can only be found in specific dedicated smartphones.

Furthermore, there are more attractive and diverse streaming packages available from third parties. A clear advantage needs to be provided in order to entice users to use CMMB. China Mobile insiders say that they need to be following the advertising model used by mobile broadcasters in other countries because people are unlikely to pay for content, especially if they can find that content for free from a regular TV or desktop computer.

Monday, April 19, 2010

All eyes on TD-LTE in India and China


The TD-SCDMA and Long Term Evolution (TD-LTE) network will be massively deployed in China, the world's largest telecommunications country by number of telecoms users, in 2010, globally premier international market research and consulting firm Infonetics Research said in a forecast report.
More and more mobile carriers have started developing the LTE, including Verizon Communications Inc., China Mobile Ltd., and China Telecom Corporation Ltd., Infonetics noted. There will be no more than twenty LTE networks in the world at the end of 2010.

China Mobile Communications, the largest mobile telecom carrier in China, will establish three experimental TD-LTE (time division-long term evolution) networks separately in three coastal cities - Qingdao, Xiamen and Zhuhai - beginning the third quarter of 2010, according to the China-based China Business News Daily.

China's Ministry of Industry and Information Technology (MIIT), the carrier, handset and component makers, and handset solution suppliers in China in late 2008 began to cooperate for the development of TD-LTE in three phases, the report said.

The first-phase trial of technological concepts completed in June 2009, and the ongoing R&D and experiments in the second phase will be finished at the end of June 2010, the report indicated, adding the third phase will begin with China Mobile setting up three trial networks in the third quarter.

China Mobile Communications, the largest mobile telecom carrier in China, on April 15 inaugurated its first experimental TD-LTE network at the site of the 2010 Shanghai World Expo.

The trial network consists of 17 outdoor TD-LTE base stations made by Huawei Technologies completely covering the 5.28km square site and will be used to provide mobile high-definition multimedia services.

ZTE and Datang Mobile Communications Equipment as well as Motorola and Alcatel-Lucent have also set up TD-LTE access points inside a number of pavilions.

Motorola, Inc.'s Networks business has already announced in February that it has successfully deployed a TD-LTE network at the Expo Center for World Expo 2010 Shanghai China, and completed the first indoor over-the-air (OTA) TD-LTE data sessions at the site. These advancements demonstrate another milestone of collaborative industry efforts on TD-LTE commercialization, reaffirming Motorola's commitment to address the future needs of TDD spectrum operators in China and around the world.

These milestones follow the announcement by China Mobile Communications Corporation (CMCC) in 2009, that Motorola was selected as main equipment supplier to provide indoor TD-LTE coverage for pavilions at Shanghai Expo. During the Shanghai Expo, Motorola will provide an advanced end-to-end TD-LTE solution and the world's first TD-LTE USB dongles. Motorola will also leverage its orthogonal frequency division multiplexing (OFDM) expertise with professional services to deploy, maintain and optimize these leading-edge networks. Visitors will be able to experience applications such as high-definition video on demand, remote monitoring and high-speed Internet access services.

Motorola, Inc.'s Networks business announced on April 16th that it showcased an end-to-end TD-LTE demonstration via the world's first TD-LTE USB dongle at the Shanghai Expo site to support the "TD-LTE Showcase Network Opening Ceremony" hosted in Shanghai on April 15. Delegates at the ceremony experienced applications that run over a TD-LTE network via USB dongles, including high-definition video wall (simultaneous 24 video streams), remote monitoring and high-speed Internet browsing applications. This latest advancement demonstrates a major milestone of the collaborative industry efforts in building a healthy TD-LTE device ecosystem, reaffirming Motorola's commitment to TDD spectrum operators around the world.

Motorola, a leading provider of TD-LTE technology, and China Mobile share the same commitment to accelerating TD-LTE commercialization and globalization. "We are very excited to support China Mobile in bringing the world's first TD-LTE USB dongle demonstration enabled by our TD-LTE system," said Dr. Mohammad Akhtar, corporate vice president and general manager, Motorola Networks business in Asia Pacific. "A healthy devices ecosystem has always been critical to the development, commercialization and success of wireless network technologies. We are working closely with partners to drive this ecosystem as demonstrated by the advancement announced today. TD-LTE is now a commercial reality and we are very pleased to see that industry players are joining forces to accelerate TD-LTE globalization."

Interest in TD-LTE continues to grow because of several key factors: the low cost of TDD spectrum that is particularly attractive to emerging and developing markets; operators' continuing need for more capacity and spectrum; and the ability to hand-off between TD-LTE and LTE FDD networks. In effect, this ability to roam between LTE FDD and TD-LTE means operators can use TD-LTE networks to augment their FDD LTE network for more capacity or other applications such as video broadcasting, while operators choosing to use TD-LTE as their "main" network can still offer their subscribers the ability to roam to other operators' FDD LTE networks in different countries. Motorola is one of the few vendors in the industry that has expertise in, and is committed to investing in both FDD-LTE and TD-LTE, as well as WiMAX. By leveraging its orthogonal frequency division multiplexing (OFDM) expertise and WiMAX legacy, Motorola has built up its leadership position in TD-LTE with a number of industry-firsts.

Nokia Siemens Networks has inaugurated a TD-LTE Open Lab at its Chinese Hangzhou R&D facility. TD-LTE smartphone and terminal manufacturers will be able to use the lab to test the interoperability and functionality of their devices across TD-LTE networks.

"The development of terminals and devices has always been a bottleneck in the roll-out of new mobile technology," said Mr. Sha Yuejia, vice president of China Mobile. "We are thus more than happy to see that Nokia Siemens Networks has established a cutting-edge terminal testing environment, an initiative that we support wholeheartedly. After all, a healthy ecosystem needs efforts from all stakeholders."

Nokia Siemens Networks' Open Lab will provide an end-to-end testing environment for verifying the compatibility of terminals and devices with the company's TD-LTE network products and solutions. The lab will also provide consultancy and testing services to device manufacturers. Nokia Siemens Networks' TD-LTE R&D center in Hangzhou is fully integrated into the company's global network of LTE Centers of Competence.

Providing a live TD-LTE experience to operators in the region, Nokia Siemens Networks also recently kicked off a nationwide TD-LTE road show in China. Beginning in Beijing, the road show will cover more than ten provinces in three months, demonstrating the most advanced TD-LTE technology and applications.

In India, Even as the government hopes to raise around $9 billion from the 3G and BWA auctions, foreign telcos waiting in the wings are eager to unfurl a new technology — TD-LTE —which is akin to 4G technology.

US-based Qualcomm and Sweden's Ericcson aim to piggyback on TD-LTE, hoping that it will help them gain a toe-hold in India, the world's fastest growing mobile market. Qualcomm is to participate in the broadband wireless access (BWA) spectrum auction. If it does secure its bid in the auction, India could well become the first country after China to roll out TD-LTE.

TD-LTE, or Time Division Long Term Evolution, caters to peak download speeds of 100 Mbps on mobile phones, compared to the 20 Mbps for 3G and 40 Mbps for Wimax. LTE brings to the table additional spectrum, more capacity, lower cost, and is essential to take mobile broadband to the mass market.

The government has slotted the sale of two 2.3 GHz blocks of spectrum on April 11, providing 20 MHz spectrum in each of the country's 22 telecom circles. The base price has been set at $ 385 million. However, Qualcomm will need an Indian partner for its TD-LTE foray in the country since foreign direct investment is limited to 74%.

The US telco aims to use the 2.3 GHz spectrum band offered for TD-LTE-based BWA services. Sources in the know told TOI that the company would bid aggressively to corner one of the two BWA slots up for sale. There are 11 bidders for the BWA auction.

Asked to comment on the market dynamics, Sandeep Ladda, executive director, PricewaterhouseCoopers (PWC), said: "Though the Indian market is huge, it won't be smooth sailing post auction. We are adding 1 crore customers a month and in January, we added 1.9 crore customers, but the implementation of the new technology has its own cost. And India is a very cost conscious market."

Eager to play by the rules in India, Qualcomm has notified that it would enter into a joint venture with an Indian partner to launch its services and later exit from the joint venture after the network becomes operable.
Meanwhile, The WiMAX Forum has gone on the defensive during the WiMAX Forum Congress Asia in Taipei, Taiwan. The group is speeding up its time table to deliver the next generation of WiMAX--a reaction to heavy data use among WiMAX subscribers as well as the looming threat posed by Qualcomm and Ericsson's lobbying for TD-LTE in India.

Recently, the forum launched a global initiative to accelerate advanced WiMAX features that would double peak data rates and increase average and cell edge end user performance by 50 percent.

Mo Shakouri, vice president with the WiMAX Forum, said enhancements to the current generation of WiMAX weren't on the forum's roadmap, but were brought to the forefront at the urging of several WiMAX operators already facing capacity crunches. The forum reports that the average usage of data on WiMAX networks is close to 10 GB. Clearwire recently reported that mobile users average more than 7 GB of usage per month. In Russia, mobile WiMAX operator Yota sees more than 1 GB per month in data traffic from subscribers using its HTC smartphone. For laptops, it's 13 GB per month.

"Demand for data is moving so fast that we were pushed by many people to add this functionality," Shakouri said.

The WiMAX Forum has also been prodded to announce more detailed plans for 802.16m, and step up the timeline for its development via a new group called the WiMAX 2 Collaboration Initiative, which is made up of vendors Samsung, Alvarion, Motorola, ZTE, Sequans, Beceem, GCT Semiconductor and XRONet. The companies will work in tandem with the WiMAX Forum and WiMAX operators to accelerate the next-generation standard. WiMAX 2, the marketing name for the 802.16m standard, is expected to expand capacity to 300 Mbps peak rates via advances in antennas, channel stacking and frequency re-use.

The forum previously forecast 802.16m would hit in 2012 or 2013. But increasing demands for data--coupled with Qualcomm and Ericsson urging Indian mobile broadband license bidders to go with TD-LTE--motivated the forum to put some stakes in the ground and declare that WiMAX 2 equipment will meet certification by the end of 2011.

"There has been a lot of noise about TD-LTE, and the WiMAX Forum had not specifically given dates regarding timelines for 802.16m," Shakouri said. "Basically our announcement around 802.16m came about because of the noise in India."

The formation of the WiMAX 2 Collaboration Initiative is a marked change from the way the first generation of WiMAX was developed. Sprint Nextel was the entity driving the majority of the standards work as it was eager to get to market and begin building an ecosystem. Vendors are now taking the lead and driving equipment readiness before the 802.16m standard is finalized by the end of this year. Shakouri said the standard is 95 percent finished.

"Those companies are going to take a more active role inside the forum," Shakouri said. "They have all come together to speed up the process."

The group of vendors plans to collaborate on interoperability testing, performance benchmarking and application development before the WiMAX Forum establishes its certification program to narrow the gap between the finalized standard and commercial rollouts.
So how much of a threat is TD-LTE to WiMAX? Shakouri said the answer depends on spectrum decisions. "At this moment, the spectrum we are focusing on is separate, aside from what Qualcomm announced in India," Shakouri said. He also said that a TD-LTE ecosystem is at least two to three years behind WiMAX.

Many analysts speculate that TD-LTE will become the crossover technology that will prompt WiMAX operators to flip to LTE. Clearwire was part of a group of operators and vendors that last month asked the 3GPP standards body to begin working on specifications that would enable TD-LTE to be deployed in the 2.6 GHz band, which Clearwire uses for WiMAX. During the CTIA Wireless 2010 trade show last month, Clearwire CEO Bill Morrow reiterated the company's interest in deploying LTE when the technology catches up to WIMAX. He also called for one standard down the road.
Another initiative the forum is announcing this week is the launch of its Open Retail Initiative, a global program aimed at driving WiMAX into consumer devices sold directly or through retail channels that can be activated by the consumer over the air on the network. If you remember the evangelism of early WiMAX advocates like Barry West, this capability was supposed to be the Holy Grail of the technology.