Showing posts with label IMT-2020. Show all posts
Showing posts with label IMT-2020. Show all posts

Monday, May 23, 2022

5G Reality Check - Data Rates

One of the common questions that we encounter is why are 5G speeds so low as we were promised 5G downlink speeds of 20 Gbps. Most people do not understand how the 5G speeds are calculated and what do they depend on. In many cases, the network won’t be capable of delivering higher speeds due to some or the other limitation. 

In a new presentation, I try to explain the theoretical speeds and compare them with real world 5G data rates and even try to map it to why these speeds are what they are. Hopefully people won't mind me adding some humour as I go along.

Video and Slides embedded below

Embedded below is the Twitter thread on Speedtests ðŸ˜‚

Related Posts

Monday, June 7, 2021

TSDSI's Low Mobility Large Cell (LMLC) Requirements in 5G


Back in November 2020, ITU completed the evaluation for global affirmation of IMT-2020 technologies. Three new technologies were successfully evaluated by ITU and were found to conform with the International Mobile Telecommunications 2020 (IMT-2020) vision and stringent performance requirements. The technologies are: 3GPP 5G-SRIT and 3GPP 5G-RIT submitted by the Third Generation Partnership Project (3GPP), and 5Gi submitted by Telecommunications Standards Development Society India (TSDSI). 

I have explained in earlier videos that 5G-SRIT  and 5G-RIT corresponds to Non-Standalone and Standalone respectively. 5Gi on the other hand is an updated version of 5G-RIT designed mainly to improve rural coverage. 

TSDSI announced this as follows:

TSDSI’s 5G Radio Interface Technology named as “5Gi” has cleared the rigorous processes of  International Telecommunication Union (ITU) and has been approved by the SG5 of ITU as a part of Draft Recommendation M.[IMT-2020.SPECS] in its meeting held on 23rd November 2020.

5Gi, the first  ever Mobile Radio Interface Technology contribution from India to become part of ITU-R’s  IMT recommendation, went through a rigorous evaluation process of the ITU-R working groups over the past 3 years before getting the approval.

This standard is a major breakthrough for bridging the rural-urban digital divide in 5G deployment due to enhanced coverage. It enables connecting majority of India’s villages through towers located at gram panchayats in a cost effective manner. It has found support from several countries as it addresses their regional needs from a 5G standpoint.

The standard will now be circulated by ITU to member states for adoption and approval. Specifications are expected to be published by ITU in early February 2021.

TSDSI thanks its members, the Department of Telecommunications, Govt. of India and its partners for their support over the last four years in helping get this standard reach the final stage in ITU.

In a keynote address presented to the 2020 IEEE 5G World Forum plenary session, Radha Krishna Ganti from TSDSI discusses rural connectivity challenges in India, Low Mobility Large Cell requirements, benefits of implementing LMLC for rural coverage, and internet ecosystem updates. His talk is embedded as follows:

TSDSI explains their 5Gi technology as follows:

TSDSI standard fulfils the requirements of affordable connectivity in rural, remote and sparsely populated areas. Enhanced cell coverage enabled by this standard, will be of great value in countries and regions that rely heavily on mobile technologies for connectivity but cannot afford dense deployment of base stations due to lack of deep fibre penetration,  poor economics and challenges of geographical terrain. The International Telecommunication Union (ITU), a UN body that is setting requirements for IMT 2020 (aka 5G), had earlier adopted the Low-Mobility-Large-Cell (LMLC) use case proposed by TSDSI as a mandatory 5G requirement in 2017. This test case addresses the problem of rural coverage by mandating large cell sizes in a rural terrain and scattered areas in developing as well as developed countries. Several countries supported this as they saw a similar need in their jurisdictions as well. TSDSI successfully introduced an indigenously developed 5G candidate Radio Interface Technology, compatible with 3GPP Technology, at the International Telecommunications Union (ITU) in 2019 for IMT 2020 ratification. The RIT incorporates India-specific technology enhancements that can enable larger coverage for meeting the LMLC requirements. It exploits a new transmit waveform that increases cell range developed by research institutions in India (IIT Hyderabad, CEWiT and IIT Madras) and supported by several Indian companies. It enables low-cost rural coverage and has additional features which enable higher spectrum efficiency and improved latency.

While technically this sounds interesting and as discussed in the talk, would make sense due to a large market like India, there are other solutions that are already possible that probably may make this redundant.

As someone who worked with the rural communities to bring coverage in hard to reach areas, small cells and In-band backhaul was one such solution to improve coverage in not-spot areas. Examples of that here and here. Relays are other option that don't cost much but can bring coverage quickly, at a much lower price.

Typically, in practice, the cells easily reach 10km radius. In theory this distance can be as much as 100km. Last year, Australian operator Telstra and vendor Ericsson announced that they have successfully managed to increase the range of an LTE cell from 100 km to 200 km. So, we can already have large cells with existing 4G/5G cells. 

Facebook connectivity is working on SuperCell concept, a Wide-Area Coverage Solution for Increasing Mobile Connectivity in Rural Communities. Details here. NGMN published a paper on Extreme Long Range Communications for Deep Rural Coverage. Details here.

Finally, we also have 5G Integrated Access and Backhaul (IAB) that can be used for backhauling and solving backhaul issues. They will end up playing a role in rural areas as well as dense urban areas eventually.

Let me know what you think.

Related Posts:

Monday, May 24, 2021

ITU Standardization Bureau on Machine Learning for 5G


Last year I blogged about Global ITU AI/ML 5G Challenge on the theme “How to apply ITU's ML architecture in 5G networks".  The grand challenge finale happened in December. All the recording and presentations are available here.

Back in October, Bilel Jamoussi from ITU presented a keynote to the 2020 IEEE 5G World Forum plenary session where he addressed the challenges of applying machine learning in networks, ITU’s ML toolkit, and ITU’s AI/ML in 5G Competition. IEEE Tv shared the presentation only in April so the competition part is a bit outdated. It does nevertheless an interesting 20 minute talk.

ITU Recommendation Y.3174, Framework for data handling to enable machine learning in future networks including IMT-2020 is available here.

Related Posts

Thursday, September 5, 2019

Opinion: What is "Real 5G" or "True 5G"


I made another opinion piece couple of weeks back. While it was shared already as part of some channels, here is it on the blog with serves as a permanent link. Video and slides below.





As always, I welcome your opinions, comments & suggestions below.


Related Posts:

Monday, October 29, 2018

Overview 3GPP 5G NR Physical Layer

3GPP held a workshop on 5G NR submission towards IMT-2020 last week. You can access all the agenda, documents, etc. on the 3GPP website here. You can also get a combined version of all presentations from the 3G4G website here. I also wrote a slightly detailed article on this workshop on 3G4G website here.

One of the presentations on 'Physical layer structure, numerology and frame structure, NR spectrum utilization mechanism 3GPP 5G NR submission towards IMT-2020' by Havish Koorapaty, Ericsson is a good introductory material on 5G New Radio (NR) Physical Layer. It is embedded below (thanks to Eiko Seidel for sharing) and the PDF can be downloaded from slideshare or 3G4G website here.



Related Links:

Sunday, August 5, 2018

ITU 'Network 2030': Initiative to support Emerging Technologies and Innovation looking beyond 5G advances

Source: ITU

As per this recent ITU Press Release:

The International Telecommunication Union, the United Nations specialized agency for information and communication technology (ICT), has launched a new research initiative to identify emerging and future ICT sector network demands, beyond 2030 and the advances expected of IMT-2020 (5G) systems. This work will be carried out by the newly established ITU Focus Group on Technologies for Network 2030, which is open to all interested parties.

The ITU focus group aims to guide the global ICT community in developing a "Network 2030" vision for future ICTs. This will include new concepts, new architecture, new protocols – and new solutions – that are fully backward compatible, so as to support both existing and new applications.

"The work of the ITU Focus Group on Technologies for 'Network 2030' will provide network system experts around the globe with a very valuable international reference point from which to guide the innovation required to support ICT use cases through 2030 and beyond," said ITU Secretary-General Houlin Zhao.

These ICT use cases will span new media such as hologrammes, a new generation of augmented and virtual reality applications, and high-precision communications for 'tactile' and 'haptic' applications in need of processing a very high volume of data in near real-time – extremely high throughput and low latency.   

Emphasizing this need, the focus group's chairman, Huawei's Richard Li, said, "This Focus Group will look at new media, new services and new architectures. Holographic type communications will have a big part to play in industry, agriculture, education, entertainment – and in many other fields. Supporting such capabilities will call for very high throughput in the range of hundreds of gigabits per second or even higher."

The ITU Focus Group on Technologies for 'Network 2030' is co-chaired by Verizon's Mehmet Toy, Rostelecom's Alexey Borodin, China Telecom's Yuan Zhang, Yutaka Miyake from KDDI Research, and is coordinated through ITU's Telecommunication Standardization Sector – which works with ITU's 193 Member States and more than 800 industry and academic members to establish international standards for emerging ICT innovations.

The ITU focus group reports to and will inform a new phase of work of the ITU standardization expert group for 'Future Networks' – Study Group 13. It will also strengthen and leverage collaborative relationships with and among other standards development organizations including: The European Telecommunications Standards Institute (ETSI), the Association for Computing Machinery's Special Interest Group on Data Communications (ACM SIGCOMM), and the Institute of Electrical and Electronics Engineers' Communications Society (IEEE ComSoc).
Source: ITU

According to the Focus Group page:

The FG NET-2030, as a platform to study and advance international networking technologies, will investigate the future network architecture, requirements, use cases, and capabilities of the networks for the year 2030 and beyond. 

The objectives include: 

• To study, review and survey existing technologies, platforms, and standards for identifying the gaps and challenges towards Network 2030, which are not supported by the existing and near future networks like 5G/IMT-2020.
• To formulate all aspects of Network 2030, including vision, requirements, architecture, novel use cases, evaluation methodology, and so forth.
• To provide guidelines for standardization roadmap.
• To establish liaisons and relationships with other SDOs.

An ITU interview with Dr. Richard Li, Huawei, Chairman of the ITU-T FG on Network 2030 is available on YouTube here.

A recent presentation by Dr. Richard Li on this topic is embedded below:



First Workshop on Network 2030 will be held in New York City, United States on 2 October 2018. Details here.

Related News:

Sunday, March 19, 2017

Latest on 5G Spectrum - March 2017

In an earlier post I mentioned that there will be three different types of spectrum that would be needed for 5G; coverage layer, capacity layer and high throughput layer. There is now a consensus within the industry for this approach.


In a 5G seminar, back in Jan, there were a few speakers who felt that there is an informal agreement about the frequencies that will be used. One such slide from Ofcom could be seen in the picture above. Ofcom has also recently released a report expanding on this further.


Analysys Mason has nicely summarized the bands suggested by Ofcom and possibly available in the UK for 5G in the picture above.

Global mobile Suppliers Association (GSA) has also nicely summarised the bands under investigations and trials as follows:

Coverage Layer600 MHz, 700 MHz, 800 MHz, 900 MHz, 1.5 GHz, 2.1 GHz, 2.3 GHz and 2.6 GHz

Capacity Layer:

Europe                     3400 – 3800 MHz (awarding trial licenses)

China                       3300 – 3600 MHz (ongoing trial), 4400 – 4500 MHz, 4800 – 4990 MHz

Japan                       3600 – 4200 MHz and 4400-4900 MHz

Korea                       3400 – 3700 MHz

USA                          3100 – 3550 MHz (and 3700 – 4200 MHz)

High Throughput Layer:

USA:      27.5 – 28.35 GHz and 37 – 40 GHz pre-commercial deployments in 2018

Korea:   26.5 – 29.5 GHz trials in 2018 and commercial deployments in 2019

Japan:   27.5 – 28.28 GHz trials planned from 2017 and potentially commercial deployments in 2020

China:    Focusing on 24.25 – 27.5 GHz and 37 – 43.5 GHz studies

Sweden: 26.5 – 27.5 GHz awarding trial licenses for use in 2018 and onwards

EU:        24.25 – 27.5 GHz for commercial deployments from 2020

Finally, as a reminder, list of bands originally approved for IMT-2020 (5G) as follows:


Another potential band, not being mentioned above is the 66-76GHz spectrum. This band is adjacent to the 60 GHz Wi-Fi (57 GHz - 66 GHz). Lessons learned from that band can be applied to the 5G band too.

Related links:



Monday, March 6, 2017

IMT-2020 (5G) Requirements


ITU has just agreed on key 5G performance requirements for IMT-2020. A new draft report ITU-R M.[IMT-2020.TECH PERF REQ] is expected to be finally approved by  ITU-R Study Group 5 at its next meeting in November 2017. The press release says "5G mobile systems to provide lightning speed, ultra-reliable communications for broadband and IoT"


The following is from the ITU draft report:

The key minimum technical performance requirements defined in this document are for the purpose of consistent definition, specification, and evaluation of the candidate IMT-2020 radio interface technologies (RITs)/Set of radio interface technologies (SRIT) in conjunction with the development of ITU-R Recommendations and Reports, such as the detailed specifications of IMT-2020. The intent of these requirements is to ensure that IMT-2020 technologies are able to fulfil the objectives of IMT-2020 and to set a specific level of performance that each proposed RIT/SRIT needs to achieve in order to be considered by ITU-R for IMT-2020.


Peak data rate: Peak data rate is the maximum achievable data rate under ideal conditions (in bit/s), which is the received data bits assuming error-free conditions assignable to a single mobile station, when all assignable radio resources for the corresponding link direction are utilized (i.e., excluding radio resources that are used for physical layer synchronization, reference signals or pilots, guard bands and guard times). 

This requirement is defined for the purpose of evaluation in the eMBB usage scenario. 
The minimum requirements for peak data rate are as follows:
Downlink peak data rate is 20 Gbit/s.
Uplink peak data rate is 10 Gbit/s.


Peak spectral efficiency: Peak spectral efficiency is the maximum data rate under ideal conditions normalised by channel bandwidth (in bit/s/Hz), where the maximum data rate is the received data bits assuming error-free conditions assignable to a single mobile station, when all assignable radio resources for the corresponding link direction are utilized (i.e. excluding radio resources that are used for physical layer synchronization, reference signals or pilots, guard bands and guard times).

This requirement is defined for the purpose of evaluation in the eMBB usage scenario.
The minimum requirements for peak spectral efficiencies are as follows: 
Downlink peak spectral efficiency is 30 bit/s/Hz.
Uplink peak spectral efficiency is 15 bit/s/Hz.


User experienced data rate: User experienced data rate is the 5% point of the cumulative distribution function (CDF) of the user throughput. User throughput (during active time) is defined as the number of correctly received bits, i.e. the number of bits contained in the service data units (SDUs) delivered to Layer 3, over a certain period of time.

This requirement is defined for the purpose of evaluation in the related eMBB test environment.
The target values for the user experienced data rate are as follows in the Dense Urban – eMBB test environment: 
Downlink user experienced data rate is 100 Mbit/s
Uplink user experienced data rate is 50 Mbit/s


5th percentile user spectral efficiency: The 5th percentile user spectral efficiency is the 5% point of the CDF of the normalized user throughput. The normalized user throughput is defined as the number of correctly received bits, i.e., the number of bits contained in the SDUs delivered to Layer 3, over a certain period of time, divided by the channel bandwidth and is measured in bit/s/Hz. 

This requirement is defined for the purpose of evaluation in the eMBB usage scenario.
Indoor Hotspot – eMBB - Downlink: 0.3 bit/s/Hz Uplink: 0.21 bit/s/Hz
Dense Urban – eMBB - Downlink: 0.225 bit/s/Hz Uplink: 0.15 bit/s/Hz
Rural – eMBB - Downlink: 0.12 bit/s/Hz Uplink: 0.045 bit/s/Hz


Average spectral efficiency: Average spectral efficiency  is the aggregate throughput of all users (the number of correctly received bits, i.e. the number of bits contained in the SDUs delivered to Layer 3, over a certain period of time) divided by the channel bandwidth of a specific band divided by the number of TRxPs and is measured in bit/s/Hz/TRxP.

This requirement is defined for the purpose of evaluation in the eMBB usage scenario.
Indoor Hotspot – eMBB - Downlink: 9 bit/s/Hz/TRxP Uplink: 6.75 bit/s/Hz/TRxP
Dense Urban – eMBB - Downlink: 7.8 bit/s/Hz/TRxP Uplink: 5.4 bit/s/Hz/TRxP
Rural – eMBB - Downlink: 3.3 bit/s/Hz/TRxP Uplink: 1.6 bit/s/Hz/TRxP


Area traffic capacity: Area traffic capacity is the total traffic throughput served per geographic area (in Mbit/s/m2). The throughput is the number of correctly received bits, i.e. the number of bits contained in the SDUs delivered to Layer 3, over a certain period of time.

This requirement is defined for the purpose of evaluation in the related eMBB test environment.
The target value for Area traffic capacity in downlink is 10 Mbit/s/m2 in the Indoor Hotspot – eMBB test environment.


User plane latency: User plane latency is the contribution of the radio network to the time from when the source sends a packet to when the destination receives it (in ms). It is defined as the one-way time it takes to successfully deliver an application layer packet/message from the radio protocol layer 2/3 SDU ingress point to the radio protocol layer 2/3 SDU egress point of the radio interface in either uplink or downlink in the network for a given service in unloaded conditions, assuming the mobile station is in the active state. 
This requirement is defined for the purpose of evaluation in the eMBB and URLLC usage scenarios.
The minimum requirements for user plane latency are
4 ms for eMBB
1 ms for URLLC 
assuming unloaded conditions (i.e., a single user) for small IP packets (e.g., 0 byte payload + IP header), for both downlink and uplink.


Control plane latency: Control plane latency refers to the transition time from a most “battery efficient” state (e.g. Idle state) to the start of continuous data transfer (e.g. Active state).
This requirement is defined for the purpose of evaluation in the eMBB and URLLC usage scenarios.
The minimum requirement for control plane latency is 20 ms. Proponents are encouraged to consider lower control plane latency, e.g. 10 ms.


Connection density: Connection density is the total number of devices fulfilling a specific quality of service (QoS) per unit area (per km2).

This requirement is defined for the purpose of evaluation in the mMTC usage scenario.
The minimum requirement for connection density is 1 000 000 devices per km2.


Energy efficiency: Network energy efficiency is the capability of a RIT/SRIT to minimize the radio access network energy consumption in relation to the traffic capacity provided. Device energy efficiency is the capability of the RIT/SRIT to minimize the power consumed by the device modem in relation to the traffic characteristics. 
Energy efficiency of the network and the device can relate to the support for the following two aspects:
a) Efficient data transmission in a loaded case;
b) Low energy consumption when there is no data.
Efficient data transmission in a loaded case is demonstrated by the average spectral efficiency 

This requirement is defined for the purpose of evaluation in the eMBB usage scenario.
The RIT/SRIT shall have the capability to support a high sleep ratio and long sleep duration. Proponents are encouraged to describe other mechanisms of the RIT/SRIT that improve the support of energy efficient operation for both network and device.


Reliability: Reliability relates to the capability of transmitting a given amount of traffic within a predetermined time duration with high success probability

This requirement is defined for the purpose of evaluation in the URLLC usage scenario. 
The minimum requirement for the reliability is 1-10-5 success probability of transmitting a layer 2 PDU (protocol data unit) of 32 bytes within 1 ms in channel quality of coverage edge for the Urban Macro-URLLC test environment, assuming small application data (e.g. 20 bytes application data + protocol overhead). 
Proponents are encouraged to consider larger packet sizes, e.g. layer 2 PDU size of up to 100 bytes.


Mobility: Mobility is the maximum mobile station speed at which a defined QoS can be achieved (in km/h).

The following classes of mobility are defined:
Stationary: 0 km/h
Pedestrian: 0 km/h to 10 km/h
Vehicular: 10 km/h to 120 km/h
High speed vehicular: 120 km/h to 500 km/h

Mobility classes supported:
Indoor Hotspot – eMBB: Stationary, Pedestrian
Dense Urban – eMBB: Stationary, Pedestrian, Vehicular (up to 30 km/h)
Rural – eMBB: Pedestrian, Vehicular, High speed vehicular 


Mobility interruption time: Mobility interruption time is the shortest time duration supported by the system during which a user terminal cannot exchange user plane packets with any base station during transitions.

This requirement is defined for the purpose of evaluation in the eMBB and URLLC usage scenarios.
The minimum requirement for mobility interruption time is 0 ms.


Bandwidth: Bandwidth is the maximum aggregated system bandwidth. The bandwidth may be supported by single or multiple radio frequency (RF) carriers. The bandwidth capability of the RIT/SRIT is defined for the purpose of IMT-2020 evaluation.

The requirement for bandwidth is at least 100 MHz
The RIT/SRIT shall support bandwidths up to 1 GHz for operation in higher frequency bands (e.g. above 6 GHz). 

In case you missed, a 5G logo has also been released by 3GPP


Related posts:



Sunday, April 17, 2016

NTT Docomo's 5G Treasure Trove


NTT Docomo's recent technical journal has quite a few interesting 5G articles. While it is well known that 5G will be present in Japan in some or the other shape by 2020, for the summer Olympics, NTT Docomo started studying technologies for 5G in 2010. Some of these have probably ended in 4.5G, a.k.a. LTE-Advanced Pro.

While there are some interesting applications and services envisioned for 5G, I still think some of these can be met with LTE-A and some of them may not work with the initial versions of 5G

As far as 5G timetable is concerned, I recently posted a blog post on this topic here. Initial versions of 5G will have either little or no millimetre wave (mmWave) bands. This is because most of these would be finalised in 2019 after WRC-19 has concluded. It may be a touch challenge to move all the existing incumbents out of these bands or agree of a proper sharing mechanism.

'5G+' or '5G phase 3' will make extensive use of these higher frequency bands extensively in addition to the low and mid frequency bands. For anyone not familiar with different 5G phases, please see this earlier post here.

Enhanced LTE (or eLTE) is probably the same as LTE-Advanced Pro. Docomo believes that the initial 5G deployment would include new RAT but existing 4G core network which would be enhanced later for 5G+. Some of this new RAT technologies are discussed as well.

Core Network evolution is another interesting area. We looked at a possible architecture evolution here. To quote from the magazine:

The vision for future networks is shown in Figure 3. A future network will incorporate multiple radio technologies including LTE/LTE-Advanced, 5G New Radio Access Technology (RAT), and Wi-Fi, and be able to use them according to the characteristics of each service.

Utilizing virtualization technologies, network slices optimized for service requirements such as high efficiency or low delay can be created. Common physical devices such as general-purpose servers and Software Defined Network (SDN) transport switches will be used, and these networks will be provided to service providers. Network slices can be used either on a one service per network basis to increase network independence for originality or security, or with multiple services on one slice to increase statistical multiplexing gain and provide services more economically.

The specific functional architecture and the network topology for each network slice are issues to be studied in the future, but in the case of a network slice accommodating low latency services, for example, GateWay (GW) functions would need to be relatively close to radio access, service processing would be close to terminals, and routing control capable of finding the shortest route between terminals would be necessary to reduce latency. On the other hand, a network slice providing low volume communications to large numbers of terminals, such as with smart meters, would need functionality able to transmit that sort of data efficiently, and such terminals are fixed, so the mobility function can be omitted. In this way, by providing network slices optimized according to the requirements of each service, requirements can be satisfied while still reducing operating costs.

The magazine is embedded below and available to download from here:





See Also:

Tuesday, February 3, 2015

5G: A 2020 Vision


I had the pleasure of speaking at the CW (Cambridge Wireless) event ‘5G: A Practical Approach’. It was a very interesting event with great speakers. Over the next few weeks, I will hopefully add the presentations from some of the other speakers too.

In fact before the presentation (below), I had a few discussions over the twitter to validate if people agree with my assumptions. For those who use twitter, maybe you may want to have a look at some of these below:







Anyway, here is the presentation.