Tutorial on 4G/5G Mobile Network Uplink Working and Challenges

People involved with mobile technology know the challenges with uplink for any generation of mobile network. With increasing data rates in 4G and 5G, the issue has become important as most of the speeds are focused on download but upload speeds are quite poor.

Speedtests are still the 5G killer app (#5GKillerApp) right now. Fantastic speeds from Verizon 5G Ultra Wideband (UWB) #5GBuiltRight. Upload speeds 250+ Mbps but notice how to hold the phone right to get these speeds 🤫https://t.co/DS18IOw8AW

— 3G4G (@3g4gUK) February 12, 2021

Even without massive MIMO mobile networks are uplink limited. We've always engineered networks accordingly.

— Andy Sutton (@960sutton) June 5, 2019

People who follow us across our channels know of many of the presentations we share across them from various sources, not just ours. One such presentation by Peter Schmidt looked at the uplink in details. In fact we recommend following him on Twitter if you are interested in technical details and infrastructure.

The details of his talk as follows:

The lecture highlights the influences on the mysterious part of mobile communications - sources of interference in the uplink and their impact on mobile communication as well as practices for detecting sources of RF interference.

The field strength bar graph of a smartphone (the downlink reception field strength) is only half of the truth when assessing a mobile network coverage. The other half is the uplink, which is largely invisible but highly sensitive to interference, the direction from the end device to the base stations. In this lecture, sources of uplink interference, their effects and measurement and analysis options will be explained.

Cellular network uplink is essential for mobile communication, but nobody can really see it. The uplink can be disrupted by jammers, repeaters, and many other RF sources. When it is jammed, mobile communication is limited. I will show what types of interference sources can disrupt the uplink and what impact this has on cellular usage and how interference hunting can be done.

First I explain the necessary level symmetry of the downlink (from the mobile radio base station - eNodeB to the end device) and the uplink (from the end device back to the eNodeB). Since the transmission power of the end device and eNodeB are very different, I explain the technical background to achieving symmetry. In the following I will explain the problems and possibilities when measuring uplink signals on the eNodeB, it is difficult to look inside the receiver. In comparison, the downlink is very easy to measure, you can see the bars on your smartphone or you can use apps that provide detailed field strength information etc. However, the uplink remains largely invisible. However, if this is disturbed on the eNodeB, the field strength bars on the end device say nothing. I will present a way of observing which some end devices bring on board or can be read out of the chipset with APPs. The form in which the uplink can be disrupted, the effects on communication and the search for uplink sources of disruption will complete the presentation. I will also address the problem of 'passive intermodulation' (PIM), a (not) new source of interference in base station antenna systems, its assessment, measurement and avoidance.

The slides are available here. The original lecture was in German, a dubbed video is embedded below:

If you know of some other fantastic resources that we can share with our audience, please feel free to add them in the comments.

Related Posts: 

• The 3G4G Blog - Radio Design Webinar: Optimising Your 700 MHz Deployments
• The 3G4G Blog: 2G/3G Shutdown may Cost Lives as 4G/5G Voice Roaming is a Mess
• The 3G4G Blog: Lawful Intelligence and Interception in 5G World with Data and OTT Apps
• The 3G4G Blog: Transitioning from eCall to NG-eCall and the Legacy Problem
• The 3G4G Blog: ATIS Webinar on '5G Standards Development Update in 3GPP Release 17 and 18'
• The 3G4G Blog: 3GPP Release-17 5G NR Reaches Completion
• The 3G4G Blog: 5G Network Slicing for Beginners
• The 3G4G Blog: Everything you need to know about 5G Security 

Base Station Antenna Considerations for 5G

I first mentioned Quintel in this blog three years back for their innovations in 4T8R/8T8R antennas. Since then they have been going strength to strength.

I heard David Barker, CTO of Quintel at Cambridge Wireless event titled "Radio technology for 5G – making it work" talking about the antennas consideration for 5G. There are quite a few important areas in this presentation for consideration. The presentation is embedded below:

Base Station Antenna needs for the 5G RAN from 3G4G

Related Posts:

• Using 8T8R Antennas for TD-LTE
• Antenna evolution: From 4G to 5G
• The Art of Disguising Cellular Antennas
• AT&T Blog: "Providing Connectivity from Inside a Cactus"
• Automated 4G / 5G HetNet Design

LA-LTE and LAA

Recently came across a presentation by Ericsson where they used the term LA-LTE. I asked a few colleagues if they knew or could guess what it means and they all drew blank. I have been blogging about Unlicensed LTE (a.k.a. LTE-U) on the Small Cells blog here. This is a re-branding of LTE-U

LA-LTE stands for 'Licensed Access' LTE. In fact the term that has now been adopted in a recent 3GPP workshop (details below) is Licensed Assisted Access (LAA).

Couple of months back I blogged in detail about LTE-U here. Since then, 3GPP held a workshop where some of the things I mentioned got officially discussed. In case you want to know more, details here. I have to mention that the operator community is quite split on whether this is a better approach or aggregating Wi-Fi with cellular a better approach.

The Wi-Fi community on the other hand is unhappy with this approach. If cellular operators start using their spectrum than it means less spectrum for them to use. I wrote a post on the usage of Dynamic Spectrum Access (DSA) Techniques that would be used in such cases to make sure that Wi-Fi and cellular usage does not happen at the same time, leading to interference.

Here is a presentation from the LTE-U workshop on Use cases and scenarios, not very detailed though.

Finally, the summary presentation of the workshop. As it says on the final slide "The current SI proposal focuses on carrier aggregation operations and uses the acronym LAA (Licensed Assisted Access)", you would be seeing more of LAA.

3GPP workshop on LTE in unlicensed spectrum, June 13, 2014: Chairman Summary from Zahid Ghadialy

New RRC message in Rel-11: In-device coexistence indication

I have blogged about about IDC here and here. If the eNB is interested in knowing if the device is having an interference issue it can ask the UE to send this message in the RRC Conn Reconfiguration message. The UE would send the message if it has interference issues.

Inter-frequency handover is a good solution in case the UE is experiencing interference.

From the Rel-11 whitepaper posted last week here:

To assist the base station in selecting an appropriate solution, all necessary/available assistance information for both time and frequency domain solutions is sent together in the IDC indication. The IDC assistance information contains the list of carrier frequencies suffering from on-going interference and the direction of the interference. Additionally it may also contain time domain patterns or parameters to enable appropriate DRX configuration for time domain solutions on the serving LTE carrier frequency.

Note that the network is in the control of whether or not to activate this interference avoidance mechanism. The InDeviceCoexIndication message from the UE may only be sent if a measurement object for this frequency has been established. This is the case, when the RRCConnectionReconfiguration message from the eNB contains the information element idc-Config. The existence of this message declares that an InDeviceCoexIndication message may be sent. The IDC message indicates which frequencies of which technologies are interfered and gives assistance to possible time domain solutions. These comprise DRX assistance information and a list of IDC subframes, which indicate which HARQ processes E-UTRAN is requested to abstain from using. This information describes only proposals, it is completely up to the network to do the decisions.

Interference avoidance for in-device coexistence (IDC)

I posted on this topic couple of years back, so here is a quick update. There is also an article in IEEE Comsoc magazine if you can get hold of it.

Here is the updated 3GPP document

Study on signalling and procedure for interference avoidance for in-device coexistence from Zahid Ghadialy

SI on Signalling and procedure for interference avoidance for in-device coexistence

In order to allow users to access various networks and services ubiquitously, an increasing number of UEs are equipped with multiple radio transceivers. For example, a UE may be equipped with LTE, WiFi, and Bluetooth transceivers, and GNSS receivers. One resulting challenge lies in trying to avoid coexistence interference between those collocated radio transceivers. Figure 4-1 below shows an example of coexistence interference.

3GPP initiated a Study Item (SI) in Release-10 timeframe to investigate the effects of the interference due to multiple radios and signalling. This study is detailed in 3GPP TR 36.816 (see link at the end).

Due to extreme proximity of multiple radio transceivers within the same UE, the transmit power of one transmitter may be much higher than the received power level of another receiver. By means of filter technologies and sufficient frequency separation, the transmit signal may not result in significant interference. But for some coexistence scenarios, e.g. different radio technologies within the same UE operating on adjacent frequencies, current state-of-the-art filter technology might not provide sufficient rejection. Therefore, solving the interference problem by single generic RF design may not always be possible and alternative methods needs to be considered. An illustration of such kind of problem is shown in Figure 4-2 above.

The following scenarios were studied:

- LTE coexisting with WiFi

- LTE coexisting with Bluetooth

- LTE Coexisting with GNSS

Based on the analysis in SI, some examples of the problematic coexistence scenarios that need to be further studied are as follows:

- Case 1: LTE Band 40 radio Tx causing interference to ISM radio Rx;

- Case 2: ISM radio Tx causing interference to LTE Band 40 radio Rx;

- Case 3: LTE Band 7 radio Tx causing interference to ISM radio Rx;

- Case 4: LTE Band 7/13/14 radio Tx causing interference to GNSS radio Rx.

In order to facilitate the study, it is also important to identify the usage scenarios that need to be considered. This is because different usage scenarios will lead to different assumption on behaviours of LTE and other technologies radio, which in turn impact on the potential solutions. The following scenarios will be considered:

1a) LTE + BT earphone (VoIP service)

1b) LTE + BT earphone (Multimedia service)

2) LTE + WiFi portable router

3) LTE + WiFi offload

4) LTE + GNSS Receiver

The SI also proposes some ways of reducing the interference and is work in progress at the moment.

Reference: 3GPP TR 36.816 : Study on signalling and procedure for interference avoidance for in-device coexistence; (Release 10).