Three New Standards to Accelerate 5G Wireless Wireline Convergence (WWC)

It's been just over a year since I wrote a detailed post on what I called '5G and Fixed-Mobile Convergence (FMC)'. The technical term being used in the industry for this feature is Wireless Wireline Convergence (WWC). 

BBF (@Broadband_Forum) has published 3 new standards to accelerate global 5G adoption - https://t.co/ufoHRfK3BE - Wireless Wireline Convergence (#WWC) allows Wi-Fi and other wireline technologies to be part of 5G#Free5Gtraining #5G #5GNetworks #5GTechnology #FMC #5GConvergence pic.twitter.com/OcCyLYix2b

— 5G Training (@5Gtraining) November 26, 2020

Broadband Forum, the communications industry’s leading open standards development organization focused on accelerating broadband innovation, standards, and ecosystem development has just announced the publication of three new standards to accelerate global 5G adoption. The press release said:

Building on the Forum’s mission to drive a future consolidated approach to 5G, the standards will reduce development time, as well as capex and opex, from the traditional disparate fixed broadband and 5G networks. Ultimately, they will deliver a common and managed broadband experience to the end-user whatever the final connectivity technology.

There are three major sets of technical specifications that have been finalized, including 5G Wireless Wireline Convergence Architecture (TR-470), Access Gateway Function (AGF) Functional Requirements (TR-456) and Device Data Model (TR-181). Together, these documents provide functions and interfaces for Fixed Mobile Convergence (FMC), the AGF, and customer premises equipment (CPE) such as 5G-enabled routers.

TR-470 – produced in conjunction with 3GPP – describes the 5G FMC architecture, providing a high-level guide for network architects and planners and enabling fixed and mobile functions to coexist over a shared infrastructure. This will facilitate multi-access connectivity and give consumers a seamless, access-independent service experience.

For operators, the network functions required to operate their infrastructure will be streamlined and common technology, on-boarding, training, services and subscriber management between fixed and mobile divisions can be achieved. Furthermore, additional revenue streams will be created, with FMC extending the geographical reach of 5G core networks and the service offering of fixed networks.

TR-456 describes the functional requirements of the AGF. The AGF resides between fixed access networks and the 5G core network to support 5G and wireline Residential Gateways, creating a truly converged deployment. Alongside this, Broadband Forum’s Device: 2 data model (TR-181 Issue 2 Amendment 14), which is used by User Services Platform (USP), has been extended to address 5G Residential Gateways. The Device: 2 data model applies to all types of TR-069 or USP-enabled devices, including end devices, Residential Gateways, and other network infrastructure devices

In addition, the Functional Requirements for Broadband Residential Gateway Devices (TR-124) specification is expected to be finalized in Q4 2020. Moving from the network into the home, TR-124 has been extended to add requirements related to the 5G Residential Gateway extending the 5G control plane to the premises to open up new service opportunities with real time fulfillment.

In the video below, David Allan, Work Area Director for Wireless-Wireline Convergence at Broadband Forum and Christele Bouchat, Innovation Group Director at Broadband Forum discuss what is coming up in the next phase of 5G work and what opportunities this has opened up for the industry

WWC has a great potential to allow wireline and trusted/untrusted Wi-Fi to work with 5G so I am hopeful that operators will adopt this sooner, rather than later.

Follow the links below to learn more about this feature.

Related Posts:

• Connectivity Technology Blog: 5G Wireline Access Architecture
• The 3G4G Blog: 5G and Fixed-Mobile Convergence (FMC)
• The 3G4G Blog: Introduction to 5G ATSSS - Access Traffic Steering, Switching and Splitting
• The 3G4G Blog: Exploring Network Convergence of Mobile, Broadband and Wi-Fi
• Operator Watch Blog: BT's Converged Core to Launch in 2023
• Operator Watch Blog: Jio Makes Another Set of Extremely Bold Announcements 

Radio Design Webinar: Optimising Your 700 MHz Deployments

 

Radio Design, the award-winning market leader in the provision of wireless infrastructure sharing solutions and RF filter systems, hosted a webinar last week focused on the deployment of the 700 MHz frequency band. This new 700 MHz spectrum is in great demand across the world, mainly due to its long anticipated use as low band 5G spectrum. The webinar explores the potential of this band, as well as how to prepare for potential challenges when deploying.

For people who are familiar with our trainings, we divide the spectrum into three layers, the coverage layer, the capacity layer and the high-throughput layer. 700 MHz is the most popular coverage layer spectrum worldwide.

The slide above from the webinar talks of the recent Austrian 5G Spectrum auction that we blogged about. See tweet below for details

Operator Watch Blog: Austria Gets New 5G Spectrum - https://t.co/jN3sdIeci8 featuring tweets from @JimStLeger @tefficient #3G4G5G #OperatorWatch #Spectrum #4G #5G #Austria #Europe #RTR #H3A #Drei #TMobile #TMA #A1 pic.twitter.com/FAPAZsIGnl

— 3G4G (@3g4gUK) October 3, 2020

In the webinar, slides and video embedded below, Radio Design’s founder – Eric Hawthorn – kicks things off by analysing the benefits of deploying the 700 MHz band in the real world, before passing over to Global Engineering Director – Steve Shaw – who explores some of the technical problems which can arise, as well as some of the solutions. Last but not least, COO and co-owner of Keima – Iris Barcia – provides her insight into the benefits of deploying the 700 MHz band.

Radio Design Webinar: Optimising Your 700 MHz Deployments from 3G4G

Related Posts:

• Operator Watch Blog: Hungary Allocates 5G Spectrum in 700 MHz, 2.1 GHz and 3.6 GHz
• Operator Watch Blog: Austria Gets New 5G Spectrum
• Operator Watch Blog: Finland now has Ideal 5G Spectrum Allocation
• Operator Watch Blog: Italy's 5G Spectrum Auction Controversy
• Operator Watch Blog: Bhutan improving 2G, 3G & 4G coverage while preparing for arrival of 5G in 2022
• Operator Watch Blog: Malaysia Decides on Innovative Approach for 5G Spectrum
• The 3G4G Blog: Automated 4G / 5G HetNet Design
• The 3G4G Blog: 700 MHz Spectrum - Google: Loser or Winner? 

Business Role Models for Network Slicing and iRAT Mobility for Cellular Internet of Things (CIoT) in Release 16

 3GPP Release 16 describes business role models for network slicing and in TR 21.916 I found the figures below that I have pimped a little bit to illustrate an asset tracking use case for goods transported with a truck from Factory A to Factory B. 

Factory B is equipped with a 5G Non-Public Network (NPN) that broadcasts an NPN-ID or - if the network infrastructure is deployed by an operator - a Cell Access Group ID (CAG ID).

I would like to assume that in case of the scenario shown in 3GPP Figure 2-2 the asset tracking CIoT devices are able to access any necessary PLMN, Network Slice and NPN. This can be achieved e.g. by using an eSIM. 

So while the truck is at the location of Factory A the asset tracking "things" will connect to the private slice of Factory A provided by the operator of PLMN 1. Factory A is a tenant of this operator. This means: Factory A rented a virtual part of PLMN1 for private use and technically this rented virtual network part is realized by a NW slice. 

When the truck leaves Factory A and drives on the road (maybe a long distance) to Factory B the asset tracking data must be transmitted over public mobile network infrastructure. Depending on rural coverage this service can be offered by PLMN 2 (as in case of 3GPP figure 2-2) or by PLMN 1 (as in case of 3GPP figure 2-3).

In case of 3GPP figure 2-4 the operator of PLMN 1 is even able to provide the private slice along the road, which allows Factory A to stretch the coverage of their virtual private network (slice) over a very long distance.

Looking further into the Cellular IoT enhancements defined by 3GPP in Release 16 it turns out that actually there is no need for a nation-wide 5G coverage to realize at least the role models shown in the 3GPP figures 2-2 and 2-3.

Because Release 16 also defines co-existence and inter-RAT mobility between 5G CIoT traffic and 4G NB-IoT the operators of PLMN 1 and PLMN 2 may offer NB-IoT coverage along the road while the factories are covered with 5G NR frequency cells - as shown in my second figure below.  

It illustrates the great improved flexibility that Release 16 standards are offering for customized business solutions and monitoring the service quality is not a trivial task under these circumstances.  

Related Posts:

• The 3G4G Blog: 5G Private and Non-Public Network (NPN)
• The 3G4G Blog: Network Slicing Tutorials and Other Resources 

5G Non IP Data Delivery and Lightweight M2M (LwM2M) over NIDD

Earlier this year, MediaTek had announced that its MT2625 NB-IoT chip has been validated for LwM2M over NIDD on SoftBank Corp.’s cellular network across Japan. This achievement marks the first global commercial readiness of LwM2M over NIDD; a secure, ultra-efficient IoT communications technique that is being adopted by operators worldwide. The benefits of LwM2M over NIDD include security improvements, cost-efficient scalability and reduced power consumption.

LwM2M over NIDD is a combination of the communication technology "NIDD (Non-IP Data Delivery)" that does not use an IP address in LTE communication NB-IoT for IoT and the device management protocol "LwM2M (Lightweight M2M)" advocated by the Open Mobile Alliance. It's been a while since I wrote about Open Mobile Alliance on this blog. OMA SpecWorks is the successor brand to the Open Mobile Alliance. You can read all about it here.

OMA SpecWorks’ LightweightM2M is a device management protocol designed for sensor networks and the demands of a machine-to-machine (M2M) environment. With LwM2M, OMA  SpecWorks has responded to demand in the market for a common standard for managing lightweight and low power devices on a variety of networks necessary to realize the potential of IoT. The LwM2M protocol, designed for remote management of M2M devices and related service enablement, features a modern architectural design based on REST, defines an extensible resource and data model and builds on an efficient secure data transfer standard called the Constrained Application Protocol (CoAP). LwM2M has been specified by a group of industry experts at the OMA SpecWorks Device Management Working Group and is based on protocol and security standards from the IETF.

You can get all the LwM2M resources here and the basic specs of 'Lightweight M2M 1.1: Managing Non-IP Devices in Cellular IoT Networks' here.

The 5G Americas whitepaper 'Wireless Technology Evolution Towards 5G: 3GPP Release 13 to Release 15 and Beyond' details how Current Architecture for 3GPP Systems for IOT Service Provision and Connectivity to External Application Servers. It also talks about Rel-13 Cellular IoT EPS Optimizations which provide improved support of small data transfer over control plane and user plane. Control Plane CIoT EPS Optimization transports user data (measurements, ID, status, etc.) via MME by encapsulating user data in NAS PDUs and reduces the total number of control plane messages when handling a short data transaction. Control Plane CIoT EPS optimization, designed for small infrequent data packets, can also be used for larger data bursts depending in UE Radio capability.

User data transported using the Control Plane CIoT EPS Optimization, has special characteristics, as different mobility anchor and termination nodes.

Therefore, the Preferred Network Behavior signaling must include information on:

• Whether Control Plane CIoT EPS optimization is supported
• Whether User Plane CIoT EPS optimization is supported
• Whether Control Plane CIoT EPS optimization is preferred or whether User Plane CIoT EPS optimization is preferred

These optimizations have enabled:

• Non-IP Data Delivery (NIDD) for both: mobile originated and mobile terminated communications, by using SCEF (Service Capability Exposure Function) or SGi tunneling. However, it has to be taken into account that Non-IP PDUs may be lost and its sequence is not guaranteed
• For IP data, the UE and MME may perform header compression based on Robust Header Compression (ROHC) framework
• NB-IoT UE can attach but not activate any PDN connection
• High latency communication handled by the buffering of downlink data (in the Serving GW or the MME)
• SMS transfer
• EPS Attach, TA Update and EPS Detach procedures for NB-IoT only UEs, with SMS service request
• Procedures for connection suspend and resume are added
• Support for transfer of user plane data without the need for using the Service Request procedure to establish Access Stratum context in the serving eNodeB and UE

When selecting an MME for a UE that is using the NB-IoT RAT, and/or for a UE that signals support for CIoT EPS Optimizations in RRC signaling, the eNodeB’s MME selection algorithm shall select an MME taking into account its Release 13 NAS signaling protocol.

Mpirical has a nice short video explaining 5G Non IP Data Delivery. It is embedded below.

IoT has not taken off as expected and prophesised for years. While the OMASpecWorks is doing some fantastic work by defining simplified approach for IoT deployment, its current member list doesn't have enough operators to drive the uptake required for its spec adoption. They would argue that it doesn't matter how many members there are as the NIDD approach is completely optional and over-the-top. Let's wait and see how it progresses.

Related Posts:

• 3G4G: 5G Service Based Architecture (SBA)
• The 3G4G Blog: Mobile Initiated Connection Only (MICO) mode in 5G System
• The 3G4G Blog: Embedded SIM (eSIM) and Integrated SIM (iSIM)
• The 3G4G Blog: 5G and Industry 4.0
• 3G4G: Internet of Things (IoT) and Machine-2-Machine (M2M)
• The 3G4G Blog: M2M vs IoT
• The 3G4G Blog: What is Industrial IoT (IIoT) and how is it different from IoT?
• The 3G4G Blog: New 3GPP Release-17 Study Item on NR-Lite (a.k.a. NR-Light) 

Network Slicing Tutorials and Other Resources

I have received quite a few requests to do a 5G Network Slicing tutorial but have still not got around to doing it. Luckily there are so many public resources available that I can get away with not doing one on this topic. 

This Award Solutions webinar by Paul Shepherd (embedded below) provides good insights into network slicing, what it is, how it efficiently enables different services in 5G networks, and the architectural changes in 5G required to support it.

Then there is also this myth about 3 slices in the network. The GSMA slice template is a good starting point for an operator looking to do network slicing in their 5G networks. The latest version is 3.0, available here.

As this picture (courtesy of Phil Kendall) shows, it's not a straightforward task.  

That is 37 attributes each of which can take multiple values. The permutations are massive.

— Dr. Dan Warren (@TMGB) October 18, 2019

Alistair URIE from Nokia Bell Labs points out some common misconceptions people have with Network Slicing:

1. Multiple slices may share the same cell and the same RU in each slice
2. Single UE may have up to 8 active slices but must have a single CU-CP instance to terminate the common RRC 
3. Slicing supports more than 3 slices 

Back in March, China Mobile, Huawei, Tencent, China Electric Power Research Institute, and Digital Domain have jointly released the Categories and Service Levels of Network Slice White Paper to introduce the industry’s first classification of network slice levels. The new white paper dives into the definitions, solutions, typical scenarios, and evolution that make up the five levels of network slices. It serves as an excellent reference to provide guidance in promoting and commercializing network slicing, and lays a theoretical foundation for the industry-wide application of network slicing.

The whitepaper describes the different phases as:

Phase 1 (ready): As mentioned above, the 5G transport network and 5G core network support different software-based and hardware-based isolation solutions. On the 5G NR side, 5QIs (QoS scheduling mechanism) are mainly used to achieve software-based isolation in WAN scenarios. Alternatively, campus-specific 5G NR (including micro base stations and indoor distributed base stations) is used to implement hardware-based isolation in LAN scenarios. In terms of service experience assurance, 5QIs are used to implement differentiated SLA assurance between slices. In terms of slice OAM capabilities, E2E KPIs can be managed in a visualized manner. This means that from 2020 on, Huawei is ready to deliver commercial use of E2E slicing for common customers and VIP customers of the public network and common customer of general industries (such as UHD live broadcast and AR advertisement).

Phase 2 (to be ready in 2021): In terms of isolation, the 5G NR side supports the wireless RB resource reservation technology (including the static reservation and dynamic reservation modes) to implement E2E network resource isolation and slicing in WAN scenarios. In terms of service experience assurance, features such as 5G LAN and 5G TSN are enhanced to implement differentiated and deterministic SLA assurance between different slices. In terms of slice OAM, on the basis of tenant-level KPI visualization, the limited self-service of the industry for rented slices can be further supported. In this phase, operators can serve VIP customers in common industries (such as AR/VR cloud games and drone inspection), dedicated industry customers (such as electric power management information region, medical hospital campus, and industrial campus), and dedicated industry customers (such as electric power production control region and public security).

Phase 3 (to be ready after 2022): In this phase, 5G network slicing supports real dynamic closed-loop SLAs based on AI and negative feedback mechanism, implementing network self-optimization and better serving industries (such as 5G V2X) with high requirements on mobility, roaming, and service continuity. In addition, industry-oriented comprehensive service capabilities will be further enhanced and evolved.

A more technical presentation from Nokia is available here. The video below shows how innovations in IP routing and SDN work together to implement network slicing in the transport domain.

If you know some other good resources and tutorials worth sharing, add them in the comments below.

Related Posts:

• The 3G4G Blog: 5G Slicing Templates
• The 3G4G Blog: End-to-end Network Slicing in 5G
• The 3G4G Blog: AI your Slice to 5G Perfection 

Lawful Intercept in 5G Networks

Mats Näslund is a cryptologist at the National Defence Radio Establishment outside Stockholm, an agency under the Swedish dept. of defence. As part of his work, he represents Sweden in technical LI standardization in 3GPP. Mats also has a part time appointment as adjunct professor at KTH. Her recently delivered a HAIC Talk on Lawful Intercept in 5G Networks. HAIC Talks is a series of public outreach events on contemporary topics in information security, organized by the Helsinki-Aalto Institute for Cybersecurity (HAIC).

The following is the description from HAIC website:

Our societies have been prospering, much due to huge technological advances over the last 100 years. Unfortunately, criminal activity has in many cases also been able to draw benefits from these advances. Communication technology, such as the Internet and mobile phones, are today “tools-of-the-trade” that are used to plan, execute, and even hide crimes such as fraud, espionage, terrorism, child abuse, to mention just a few. Almost all countries have regulated how law enforcement, in order to prevent or investigate serious crime, can sometimes get access to meta data and communication content of service providers, data which normally is protected as personal/private information. The commonly used term for this is Lawful Interception (LI). For mobile networks LI is, from a technical standpoint, carried out according to ETSI and 3GPP standards. In this talk, the focus will lie on the technical LI architecture for 5G networks. We will also give some background, describing the general, high-level legal aspects of LI, as well as some current and future technical challenges.

The slides are available here.

Related Posts:

• The 3G4G Blog: Everything you need to know about 5G Security
• The 3G4G Blog: Key Technology Aspects of 5G Security by Rohde & Schwarz
• The 3G4G Blog: 5G Roaming with SEPP (Security Edge Protection Proxy)
• The 3G4G Blog: Exploiting Possible 5G Vulnerabilities
• The 3G4G Blog: Presentations from ETSI Security Week 2019 (#ETSISecurityWeek)
• The 3G4G Blog: VoLTE Hacking
• The 3G4G Blog: Evolution of Security from 4G to 5G