Saturday, September 27, 2014

Elevation Beamforming / Full-Dimension MIMO


Four major Release-13 projects have been approved now that Release-12 is coming to a conclusion. One of them is Full dimension MIMO. From the 3GPP website:

Leveraging the work on 3D channel modeling completed in Release 12, 3GPP RAN will now study the necessary changes to enable elevation beamforming and high-order MIMO systems. Beamforming and MIMO have been identified as key technologies to address the future capacity demand. But so far 3GPP specified support for these features mostly considers one-dimensional antenna arrays that exploit the azimuth dimension. So, to further improve LTE spectral efficiency it is quite natural to now study two-dimensional antenna arrays that can also exploit the vertical dimension.
Also, while the standard currently supports MIMO systems with up to 8 antenna ports, the new study will look into high-order MIMO systems with up to 64 antenna ports at the eNB, to become more relevant with the use of higher frequencies in the future.
Details of the Study Item can be found in RP-141644.
There was also an interesting post by Eiko Seidel in the 5G standards group:

The idea is to introduce carrier and UE specific tilt/beam forming with variable beam widths. Improved link budget and reduced intra- and inter-cell interference might translate into higher data rates or increased coverage at cell edge. This might go hand in hand with an extensive use of spatial multiplexing that might require enhancements to today’s MU-MIMO schemes. Furthermore in active antenna array systems (AAS) the power amplifiers become part of the antenna further improving the link budget due to the missing feeder loss. Besides a potentially simplified installation the use of many low power elements might also reduce the overall power consumption. 

At higher frequencies the antenna elements can miniaturized and their number can be increased. In LTE this might be limited to 16, 32 or 64 elements while for 5G with higher frequency bands this might allow for “massive MIMO”. 

WG: Primary RAN1 (RP-141644) 
started 06/2014 (RAN#64), completion date 06/2015 (RAN#68)
work item might follow the study with target 12/2015 (RAN#70) 

Supporting companies
Samsung/NSN, all major vendors and operators 

Based on RAN1 Rel.12 Study Item on 3D channel model (TR36.873) 

Objectives 
Phase 1: antenna configurations and evaluation scenarios Rel.12 performance evaluation with 3D channel model 

Phase 2: study and simulate FD-MIMO enhancement identify and evaluate techniques, analyze specification impact performance evaluation for 16, 32, 64 antenna elements enhancements for SU-/MU-MIMO (incl. higher dimension MU-MIMO) (keep the maximum number of layer per UE unchanged to 8)


An old presentation from Samsung is embedded below that will provide more insight into this technology:



Related post:

Sunday, September 21, 2014

NFV and 5G compatibility issues

There was an interesting discussion on Twitter that has been storified by Keith Dyer. Lets start by having a quick look at the C-RAN architecture that features in the discussion.


There are couple of excellent C-RAN presentations for anyone interested. This one by EE (with 9K+ views) and this from Orange (with 19K+ views).

Anyway, here is the story:


For anyone interested in exploring the discussion further, The Mobile Network has a more detailed comments here.

There are also an interesting article worth reading:

Thursday, September 18, 2014

Update on Public Safety and Mission Critical communications

Its been a while since I wrote about Public Safety and Mission Critical communications, so here is a quick summary.


Iain Sharp have a good overview of whats happening in the standards in the LTE World Summit back in June. Embedded below is his complete presentation.



There is another slightly older presentation that I also thought was worthwhile adding here.

There is a lot of discussion centred around the use of commercial networks for mission critical communications, mainly die to cost. While this may make sense to an extent, there should be procedures put in place to give priority to public safety in case of emergency.



We are planning to run a one day training in Jan 2015 on public safety. If this is of interest to you then please get in touch with me for more details.

x-o-x-o-x-o-x-o-x-o-x-o-x
After the post someone brought these links to my attention so I am adding them below:

Tuesday, September 9, 2014

LTE Device-to-device (D2D) Use Cases

Device-to-device is a popular topic. I wrote a post, back in March on LTE-Radar (another name) which has already had 10K+ views. Another post in Jan, last year has had over 13K views. In the LTE World Summit, Thomas Henze from Deutsche Telekom AG presented some use cases of 'proximity services via LTE device broadcast'


While there are some interesting use cases in his presentation (embedded below), I am not sure that they will necessarily achieve success overnight. While it would be great to have a standardised solution for applications that rely on proximity services, the apps have already come up with their own solutions in the meantime.

Image iTunes

The dating app Tinder, for example, finds a date near where you are. It relies on GPS and I agree that some people would say that GPS consumes more power but its already available today.



Another example is "Nearby Friends" from Facebook that allows to find your friends if they are nearby, perfect for a day when you have nothing better to do.

With an App, I can be sure that my location is being shared only for one App. With a standardised solution, all my Apps have info about location that I may not necessarily want. There are pros and cons, not sure which will win here.

Anyway, the complete presentation is embedded below:



For anyone interested in going a bit more in detail about D2D, please check this excellent article by Dr. Alastair Bryon, titled "Opportunities and threats from LTE Device-to-Device (D2D) communication"

Do let me know what you think about the use cases.