Showing posts with label Samsung. Show all posts
Showing posts with label Samsung. Show all posts

Tuesday, February 8, 2022

Extending 5G TDD Coverage With XDD (Cross Division Duplex)

A new 3GPP Technical report, TR 38.858 (draft not available yet) will look at Study on evolution of NR duplex operation (FS_NR_duplex_evo) in Rel-18. RP-213591 provides a justification on why this new duplex evolution needs to be studied:

TDD is widely used in commercial NR deployments. In TDD, the time domain resource is split between downlink and uplink. Allocation of a limited time duration for the uplink in TDD would result in reduced coverage, increased latency and reduced capacity. As a possible enhancement on this limitation of the conventional TDD operation, it would be worth studying the feasibility of allowing the simultaneous existence of downlink and uplink, a.k.a. full duplex, or more specifically, subband non-overlapping full duplex at the gNB side within a conventional TDD band.

The NR TDD specifications allow the dynamic/flexible allocation of downlink and uplink in time and CLI handling and RIM for NR were introduced in Rel-16. Nevertheless, further study may be required for CLI handling between the gNBs of the same or different operators to enable the dynamic/flexible TDD in commercial networks. The inter-gNB CLI may be due to either adjacent-channel CLI or co-channel-CLI, or both, depending on the deployment scenario. One of the problems not addressed in the previous releases is gNB-to-gNB CLI.

This study aims to identify the feasibility and solutions of duplex evolution in the areas outlined above to provide enhanced UL coverage, reduced latency, improved system capacity, and improved configuration flexibility for NR TDD operations in unpaired spectrum. In addition, the regulatory aspects need to be examined for deploying identified duplex enhancements in TDD unpaired spectrum considering potential constraints.

Samsung has a technical white paper on this topic which they refer to as XDD (Cross Division Duplex), available here. The abstract says:

XDD (Cross Division Duplex) is one of the key technologies that Samsung is proposing as part of Rel-18 NR (5G-Advanced) to address the coverage issue observed during the initial phase of 5G deployment. XDD provides improved coverage, capacity, and latency compared to conventional TDD. Instead of relying solely on orthogonal time resources for DL-UL separation as in TDD, XDD allows simultaneous DL-UL operation by using non-overlapping frequency resources within a carrier bandwidth.

This white paper provides a high level description of XDD concept, benefits, and implementation challenges. First, an overview of XDD including a comparison with conventional TDD and FDD is provided. Next, the implementation challenges of XDD especially at the base station to handle self-interference mitigation is provided. Furthermore, several features that we consider critical in realizing XDD in actual deployment scenarios are provided along with some performance results. Finally, Samsung’s view on XDD for the next phase of 5G (5G-Advanced) is provided.

An open access IEEE Access paper, 'Extending 5G TDD Coverage With XDD', written by Samsung researchers provides a much more detailed insight into this topic. The abstract says:

In this paper, an advanced duplex scheme called cross-division duplex (XDD) is proposed to enhance uplink (UL) coverage in time division duplex (TDD) carriers by utilizing self-interference cancellation (SIC) capability at a base station. With XDD, it is possible to combine TDD’s ability to efficiently handle asymmetric UL and downlink (DL) traffic with frequency division duplex’s coverage advantage. To do so, XDD simultaneously operates UL and DL on the same TDD carrier but on different frequency resources. Such operation leads to severe interference on the received UL signal at the base station which requires two levels of SIC implementation; antenna and digital SIC. More than 50 dB of interference is removed through the antenna SIC using electromagnetic barriers between the transmitting and receiving antennas. The remaining interference is removed by the digital SIC based on estimating the non-linear channel of the circuit at the receiver baseband. It is verified by simulation and analysis that with the proposed XDD, the UL coverage can be improved by up to 2.37 times that of TDD. To check the feasibility of XDD, a Proof-of-Concept was developed where it was observed that the benefits of XDD can indeed be realized using the proposed SIC techniques

In the segment of the video embedded below, Dr. Hyoung Ju Ji, Principal Engineer, Samsung Electronics, Korea explains how XDD is a Realistic Option for Full Duplex Realization.

Related Posts:

Tuesday, January 4, 2022

What is RF Front-End (RFFE) and why is it so Important?

As more technologies, frequency bands, antennas, etc., are crammed in our smartphones and tablets, it becomes essential for these devices to keep performing despite what technologies and spectrum are in use at any instant of time. This requires specialist design of the RF front end in our devices. Wikipedia explains it as:

In a radio receiver circuit, the RF front end, short for radio frequency front end, is a generic term for all the circuitry between a receiver's antenna input up to and including the mixer stage. It consists of all the components in the receiver that process the signal at the original incoming radio frequency (RF), before it is converted to a lower intermediate frequency (IF). In microwave and satellite receivers it is often called the low-noise block downconverter (LNB) and is often located at the antenna, so that the signal from the antenna can be transferred to the rest of the receiver at the more easily handled intermediate frequency.

Qualcomm is very active in this area as can be seen from the chart in the Tweet above. Back in October, Qualcomm announced ultraBAW, their new generation of micro acoustic filter technology that expands their RF front-end (RFFE) portfolio and opens up new 5G services and applications. They have a short intro video explaining RFFE:

It is also interesting to see from the Tweet above that on an average baseband + RFFE + connectivity chips cost Apple nearly $55 per device.

The analyst firm CCS Insight have also done some good work explaining RFFE and their analyst Wayne Lam has written a few detailed articles on this topic. Here are the links if you want to read further:

  • Advances in RF Front-Ends Made 5G Phones Possible (link)
  • Advances in 5G RF Front-Ends Lead to Longer Battery Life (link)

Their RFFE videos playlist is embedded below.

Also worth noting that a good modem and RF front-end, especially with 5G, can make a lot of difference in what speeds and coverage you can get

Related Posts:

Thursday, November 11, 2021

Network Slicing using User Equipment Route Selection Policy (URSP)

Google announced that its latest smartphone OS will include support for 5G network slicing. Last week Telecom TV brought this news to my attention. The article explains:

It's a move designed to leverage its expertise in devices in order to give it the edge over its rival hyperscalers.

It comes in two flavours. The first is for enterprise-owned handsets, and routes all data sent and received by a device over the network slices provided by that company's mobile operator. Android 12 gives operators the ability to manage slices using a new dynamic policy control mechanism called User Equipment Route Selection Policy (URSP). URSP enables devices to automatically switch between different network slices according to which application they are using. For example, someone working for a financial institution might require a highly-secure network slice for sending and receiving sensitive corporate data, but will then require a reliable, high-throughput, low-latency slice so they can participate in a video meeting.

The second flavour is implemented in the work profile. For years, enterprises have had the option of creating work profiles on Android devices – irrespective of whether they are owned by the organisation or the individual – to use as a separate repository for enterprise apps and data. When Android 12 comes out next year, enterprises will be able to route data to and from that repository over a network slice.

Google said it has already carried out network slicing tests with both Ericsson and Nokia using test versions of its recently released Pixel 6 smartphone running on the as-yet-unreleased Android 12 OS.

Last week Taiwanese operator Far EasTone (FET) and Ericsson announced they have completed the world’s first proof of concept (PoC) for simultaneously connecting multiple network slices per device running on Android 12 commercial release. The press release said:

The trial, carried out on FET’s 5G standalone (SA) infrastructure built on Ericsson’s radio access network and cloud-native Core network, successfully demonstrated the 5G user equipment slicing policy feature (User Equipment Route Selection Policy, or URSP) on multiple Android devices. This marks a breakthrough in network slicing capabilities on a 5G standalone network and paves the way for further ecosystem development in this important area.

With more 5G networks evolving to standalone architecture around the globe, end-to-end network slicing, which includes Ericsson RAN Slicing to secure Quality of Service (QoS) differentiation, plays a key role in enabling new services for end users, with which multiple virtual 5G networks are created on top of one physical network. The 5G trial, in collaboration with FET, Ericsson and Android, went even further in network slicing capabilities by introducing and demonstrating 5G user equipment (UE) slicing policy (URSP) features that allow devices to simultaneously operate on dynamic policy control and selection between multiple 5G network slices. This enables the steering of applications and services with specific requirements to defined slices without switching devices.

Multiple slices allow devices to have multiple profiles to secure different levels of experience, security, and privacy requirements, based on the needs of the different applications and in correspondence with the user profile.  For instance, a device can have a personal profile with private data from apps or off-work entertainment, and a work profile with enterprises productivity apps. With URSP features, employers can customize the work profile with increased security and enable better use of RAN Slicing with QoS so that enterprise-related apps can work even during network congestion.

Some security-sensitive apps, such as mobile banking, can also benefit from different routing mechanisms of the traffic enabled by URSP. For instance, the banking app would not need to send its traffic to the internet and then to the app server as it does today. Instead, it could go straight to the app server and avoid the routing through internet. With the shortest route by connecting to a defined slice, users could reduce the risk of being attacked by hackers.

In their technical whitepaper on Network Slicing, Samsung explains: 

Along with the concept of network slicing and features in the RAN and Core network, UE Route Selection Policy (URSP) is introduced as a way to manage network slice information for the UE. URSP is a network slice feature enabled by the PCF which informs the network slice status to the UE via the AMF. In 4G network systems, it was near impossible to install new services in the network for a UE. But through the URSP feature, 5G network operators can easily configure new service for a UE. Figure 12 (top of this blog post) shows the difference in network slice selection in 4G and 5G Network. In 5G network, slice selection policy can be configured dynamically through URSP, while slice selection policy is pre-defined and cannot be changed dynamically in 4G network.

URSP contains OSId, AppId, IP descriptors to define the application and Single-Network Slice Selection Assistance Information (S-NSSAI), Data Network Name (DNN), Session and Service Continuity (SSC) mode information for the application and network slice mapping.

The S-NSSAI identifies each network slice service and provides information to properly assign network slice/functions. An S-NSSAI is comprised of:

  • A Slice/Service type (SST), which refers to the expected network slice behavior in terms of features and services;
  • A Slice Differentiator (SD), which is an optional information that complements the Slice/Service type(s) to differentiate amongst multiple network slices of the same Slice/Service type.

3GPP allows the use of the Slice Differentiator (SD) field that can build customized network slices. The SD field can be used to describe services, customer information and priority.

Here is a short video from Mpirical explaining 5G UE Route Selection.

It it worth reminding here that this feature, like many of the other 5G features, is dependent on 5G Core. We hope that the transition to 5G Standalone Networks happens as soon as possible.

Related Posts:

Tuesday, August 17, 2021

'5G RAN Release 18 for Industry Verticals' Webinar Highlights

5G PPP held a virtual workshop on RAN Release 18 for Industry Verticals on June 23rd, 2021. The workshop was organised by 3GPP Market Representation Partners (MRPs): 5G-IA, 5GAA, 5G-ACIA and PSCE.

It features a fireside chat with new 3GPP RAN TSG Chair, Wanshi Chen. In addition to this, the workshop then provides a deep dive on new requirements from verticals, spanning automotive (5GAA), manufacturing (5G-ACIA), critical communications and public safety (TCCA with PSCE), broadcasting and media (5G-MAG), satellite (ESOA), rail (UIC), maritime (IALA) and energy (EUTC).

5G-SOLUTIONS came on board as a 5G PPP project supporting verticals with the 5G-EVE and 5G-VINNI 5G network infrastructures alongside RAN specialists doing standardisation work applicable to multiple verticals.

The video of the webinar is embedded below. In addition, you will find timings of when a particular talk starts and a link to the slides (if shared/available)

Timings:

  • 0:04:21 Fireside chat with Wanshi Chen, Qualcomm and 3GPP RAN TSG Chairman
  • 0:21:00 NTN Requirements in Rel-18 by Nicolas Chuberre, Thales Alenia Space (slides)
  • 0:31:40 Multiple verticals: Andrea Di Giglio, 5G SOLUTIONS (slides)
  • 0:36:35 Media and Broadcasting: David Vargas, BBC and 5G-MAG Chair of CD-T WG, Proposals for 3GPP RAN Rel-18 (slides)
  • 0:43:19 Maritime: Hyounhee Koo, Synctechno and IALA, Maritime Requirements on 3GPP Rel 18 RAN Studies/Works Priorities (slides)
  • 0:46:12 Rail: Ingo Wendler, UIC, NR Narrowband Channel Bandwidth - Railway Use Case (slides)
  • 0:50:02 Utilities: Julian Stafford, EUTC 3GPP RAN Rel-18 Requirements (slides)
  • 0:58:35 Utilities: Erik Guttman, Samsung 5G Smart Energy Infrastructure (slides)
  • 1:05:45 Multiple verticals: Mathew Webb, Huawei and 3GPP RAN 3GPP Release 17 and Release 18 support for industry verticals (slides)
  • 1:15:19 Public Safety/Critical Communications: Tero Pesonen, TCCA Chair, joint presentation with PSCE, 3GPP MRP Mini Workshop: 3GPP Rel 18. Requirements from industry verticals (slides)
  • 1:20:15 Multiple verticals: Thierry Berisot, Novamint and 3GPP RAN, Industry Verticals and Rel-18 RAN (slides)
  • 1:32:56 Manufacturing/IIoT: Michael Bahr, Siemens and 5G-ACIA WG 1Chair and An Xueli, Huawei and 5G-ACIA WG1 Vice Chair 3GPP RAN Rel-18 for Industry Verticals (slides)
  • 1:42:20 Automotive: 5GAA Maxime Flament, CTO Input to RAN 18 Rel-18 Workshop (slides)
  • 1:53:35 Interactive Session 2
  • 2:04:36 Passive IoT for 5G-Advanced, Mathew Webb, Huawei and 3GPP RAN (slides)
  • 2:14:59 Template A for Interactive Session 2
  • 2:20:40 Critical Communications / Public Safety requirements for Release 18 
  • 2:26:00 Closing Remarks

Official page here.

The slide above nicely summarizes 3GPP RAN Verticals up to Release 17.

Related Posts

Wednesday, July 7, 2021

Different Types of RAN Architectures - Distributed, Centralized & Cloud


I come across a question relating to the different type of RAN architectures once per month on an average. Even though we have covered the topic as part of some or the other tutorial, we decided to do a dedicated tutorial on this.

The video and slides are embedded below

As always, feedback and comments welcome.

Related Posts:

Monday, February 22, 2021

Reducing 5G Device Power Consumption Using Connected-mode Discontinuous Reception (C-DRX)


Back in 2019, when we were still participating in physical event, I heard Sang-Hoon Park, ESVP, Head of Regional Network O&M Headquarter, KT talk about 'KT’s journey to large-scale 5G rollout' at Total Telecom Congress.

South Korea is blessed with three highly competitive MNOs and due to this, the government asked them to launch their 5G networks at the same time in 2018. I have also blogged about how KT is working on reducing the latency of their network here.

Anyway, as you can see in the picture above, using Connected-mode Discontinuous Reception (C-DRX), KT was able to show huge power saving in the 5G Samsung smartphone. They also made a video embedded below:

KT has some more details from their blog post back in 2019 here. Also some more details on RayCat here. Both the sites are in Korean but you can use Google translate to get more details.

What is KT battery saving technology (C-DRX)?

KT's'battery saving technology' is shortened to'Connected Mode Discontinuous Reception' and is called C-DRX. In simple terms, it is one of the technologies that reduces battery usage by periodically switching the communication function of a smartphone to a low power mode while data is connected.

In CDRX technology, the base station and the terminal share CDRX information through RRC setting and reconfiguration, so when there is no packet transmission/reception by the terminal, the terminal transmission/reception terminal can be turned off to reduce battery consumption, and the CDRX setting is optimized to reduce the user's battery consumption. It is possible to increase the available time for related applications.

In order to reduce the battery consumption of the terminal, it is a technology that controls the PDCCH monitoring activity, which is a downlink control channel related to the terminal identifier, through RRC. The base station controls the CDRX through RRC, and how the communication company optimizes and applies this was a big task. Is the first in Korea to optimize this technology and apply it to the national network.

In simple terms, the smartphone is not using communication, but it turns off the power completely and enters the standby state to reduce power consumption. When not in use, it completely turns off the power wasted in transmitting and receiving even during the standby time, thus extending the user's smartphone usage time.

As can be seen from the picture above, battery saving technology saves battery by completely turning off the communication function when there is no data or voice call. If the network does not have the battery saving technology applied, it is always connected to the communication network and waits even when not in use. Then, the battery is always connected to the communication function and the battery saving technology overcomes this part.

When Qualcomm announced their Industry’s First Mobile Platform with Integrated 5G back in 2019, the press release said:

The new integrated Snapdragon 5G mobile platform features Qualcomm® 5G PowerSave technology to enable smartphones with the battery life users expect today. Qualcomm 5G PowerSave builds on connected-mode discontinuous reception (C-DRX, a feature in 3GPP specifications) along with additional techniques from Qualcomm Technologies to enhance battery life in 5G mobile devices – making it comparable to that of Gigabit LTE devices today. Qualcomm 5G PowerSave is also supported in the Snapdragon X50 and X55 5G modems, which are expected to power the first waves of 5G mobile devices introduced this year.

The picture is from the slide deck here. See links in further reading below to learn more about this feature.

Further Reading:

  • All about Wired and Wireless Technology: LTE Connected Mode DRX (link)
  • Netmanias: Future LTE Designed by SK Telecom: ​(2) Application of C-DRX, July 2017 (link)
  • Ericsson: A technical look at 5G mobile device energy efficiency, Feb 2020 (link)
  • ZTE via IEEE Access: Power Saving Techniques for 5G and Beyond, July 2020 (link)

Related Posts:

Thursday, January 21, 2021

Some Cool Gadgets from CES 2021

 


With all the disruption on events and conferences due to Covid-19 pandemic, it wasn't a surprise that CES 2021 was completely digital. It was also moved by a week so it did disrupt a few smaller events here and there. I thought it may be worth sharing a few quick videos to give you an idea about the big announcements out there. BBC has a nice detailed coverage of the whole event here.

Let's start with this short 4 mins video from CNET that quickly shows all the best devices from CES 2021.

The next is this slightly longer 12 minute video that has 20 awesome gadgets for smart homes.

Finally, there is this 11 minute plus video that is a summary of all new mobile phone technology. It's not as polished as the ones before but still good enough.

In addition, here are some links for you to watch the keynotes from relevant to our industry:

Samsung gets full marks for making a short event highlights video here. In addition, they have a press conference video and a detailed keynote video. All details are on their CES microsite here.

TCL's rollable phone and tablet is nicely captured by CNET here. Their CES microsite is here.

LG Electronics may want to learn a few tricks from Samsung as far as making microsites and videos are concerned. They CES micro site is here. The full press conference is here while Engadget summarises the keynote in just over 9 mins here. LG Wing video here makes an interesting viewing.

Finally, here are 3 links that have summarised the best/weird gadgets from CES and yes there are overlaps in their choices

If you want to share something, feel free to comment.

Related Posts:

Tuesday, November 10, 2020

Network Slicing Tutorials and Other Resources

I have received quite a few requests to do a 5G Network Slicing tutorial but have still not got around to doing it. Luckily there are so many public resources available that I can get away with not doing one on this topic. 


This Award Solutions webinar by Paul Shepherd (embedded below) provides good insights into network slicing, what it is, how it efficiently enables different services in 5G networks, and the architectural changes in 5G required to support it.

Then there is also this myth about 3 slices in the network. The GSMA slice template is a good starting point for an operator looking to do network slicing in their 5G networks. The latest version is 3.0, available here.


As this picture (courtesy of Phil Kendall) shows, it's not a straightforward task.  

Alistair URIE from Nokia Bell Labs points out some common misconceptions people have with Network Slicing:

  1. Multiple slices may share the same cell and the same RU in each slice
  2. Single UE may have up to 8 active slices but must have a single CU-CP instance to terminate the common RRC 
  3. Slicing supports more than 3 slices 

Back in March, China Mobile, Huawei, Tencent, China Electric Power Research Institute, and Digital Domain have jointly released the Categories and Service Levels of Network Slice White Paper to introduce the industry’s first classification of network slice levels. The new white paper dives into the definitions, solutions, typical scenarios, and evolution that make up the five levels of network slices. It serves as an excellent reference to provide guidance in promoting and commercializing network slicing, and lays a theoretical foundation for the industry-wide application of network slicing.

The whitepaper describes the different phases as:

Phase 1 (ready): As mentioned above, the 5G transport network and 5G core network support different software-based and hardware-based isolation solutions. On the 5G NR side, 5QIs (QoS scheduling mechanism) are mainly used to achieve software-based isolation in WAN scenarios. Alternatively, campus-specific 5G NR (including micro base stations and indoor distributed base stations) is used to implement hardware-based isolation in LAN scenarios. In terms of service experience assurance, 5QIs are used to implement differentiated SLA assurance between slices. In terms of slice OAM capabilities, E2E KPIs can be managed in a visualized manner. This means that from 2020 on, Huawei is ready to deliver commercial use of E2E slicing for common customers and VIP customers of the public network and common customer of general industries (such as UHD live broadcast and AR advertisement).

Phase 2 (to be ready in 2021): In terms of isolation, the 5G NR side supports the wireless RB resource reservation technology (including the static reservation and dynamic reservation modes) to implement E2E network resource isolation and slicing in WAN scenarios. In terms of service experience assurance, features such as 5G LAN and 5G TSN are enhanced to implement differentiated and deterministic SLA assurance between different slices. In terms of slice OAM, on the basis of tenant-level KPI visualization, the limited self-service of the industry for rented slices can be further supported. In this phase, operators can serve VIP customers in common industries (such as AR/VR cloud games and drone inspection), dedicated industry customers (such as electric power management information region, medical hospital campus, and industrial campus), and dedicated industry customers (such as electric power production control region and public security).

Phase 3 (to be ready after 2022): In this phase, 5G network slicing supports real dynamic closed-loop SLAs based on AI and negative feedback mechanism, implementing network self-optimization and better serving industries (such as 5G V2X) with high requirements on mobility, roaming, and service continuity. In addition, industry-oriented comprehensive service capabilities will be further enhanced and evolved.

A more technical presentation from Nokia is available here. The video below shows how innovations in IP routing and SDN work together to implement network slicing in the transport domain.

If you know some other good resources and tutorials worth sharing, add them in the comments below.

Related Posts:

Wednesday, February 12, 2020

AI your Slice to 5G Perfection


Back in November, The Enhanced Mobile Broadband Group in CW (Cambridge Wireless) held an event on 'Is automation essential in 5G?'. There were some thought provoking presentations and discussions but the one that stood out for me was by Dan Warren from Samsung


The slides are embedded below but I want to highlight these points:
  • Some Network Functions will be per slice whereas others will be multi-slice, the split may not be the same for every slice
  • Two slices that have the same 'per slice vs multi-slice' functional split may be different network hardware topologies
  • Enterprise customers will likely want a 'service' contract that has to be manifested as multiple slices of different types. 
  • Physical infrastructure is common to all slices
The last point is very important as people forget that there is a physical infrastructure that will generally be common across all slices.

Again, when you apply Artificial Intelligence (AI) to optimize the network functions, does it do it individually first and then end-to-end and if this is applied across all slices, each of which may have a different functionality, requirement, etc. How would it work in practice?




As Dan says in his tweet, "It is hard to implement AI to optimise a point solution without potentially degrading the things around it.  Constantly being pushed to a bigger picture view => more data => more complexity"

Let me know what you think.

Related Posts:

Monday, December 16, 2019

5G Integrated Access and Backhaul (IAB) Enhancements in Rel-17


It's been a while since I last wrote about IAB on this blog here. At that time 3GPP Release-16 was being discussed. Since then things have moved on. While Release-16 is being prepared for final release soon, Release-17 study and work items have just been agreed upon.

IAB is included as part of Rel-16 but there isn't a comprehensive document or presentation easily available to details all that it will contain. Similarly the enhancements for Release-17 are available only superficially. Qualcomm is well known for making some really excellent presentations available on 5G. One of their presentations from January (here) has some details on IAB (pg. 32 - 35). There was also an excellent presentation by Navid Abedini, Qualcomm from IEEE Sarnoff Symposium, 2019 which is embedded at the end.


In a 3GPP RAN#84 discussion document RP-191181, Samsung has provided a comprehensive summary of what is being done as part of Rel-16 and what did not make in that:
  • Rel-16 IAB aims at basic operations
    • Architecture and protocol design
    • IAB integration procedure 
    • Routing, BAP and BH configuration
    • CP and UP data transmission  via IAB
    • Topology support: 
      • Spanning Tree (ST) and Directed acyclic graph (DAG) 
      • Intra-Donor adaptation is prioritized
  • The following cannot  be supported in Rel-16
    • Mobile IAB
    • Topology support: Mesh
  • Some functionalities in Rel-16 may not be completed due to time constrains e.g. 
    • Topology adaptation between IAB donors
    • Mechanisms for efficient control signaling transmission
Ericsson also provides a good summary in RP-190971 regarding Release 16 IAB and Rel-17 enhancements:
  • IAB Rel-16 provide basic support for multi-hop and multi-path relaying. 
  • The solution supports 
    • QoS prioritization of traffic on the backhaul link
    • Flexible resource usage between access and backhaul
    • Topology adaptivity in case link failure
  • In Rel-17 it would be possible to further evolve the IAB solution targeting increased efficiency and support for new use cases


Meanwhile in the recently concluded RAN#86, AT&T provided a good detailed summary on what enhancements are required for IAB as part of Rel-17 in RP-192709
  • Duplexing enhancements
    • Multiplexing beyond TDM (FDM/SDM/multi-panel Tx/Rx) including multi-parent scenarios, case 6/7 timing alignment, power control/CLI optimizations
  • Topology enhancements
    • Mobile IAB: CP/UP split + Group mobility 
    • Inter-CU topology adaptation
    • Mesh-connectivity between IAB nodes for local control/user plane routing
  • User plane enhancements
    • Multi-hop scheduling enhancement – exchange of benefit metric between IAB nodes to enable radio-aware multi-hop scheduling to improve throughput performance
  • Network Coding
    • Study benefits compared to duplication over redundant backhaul routes

We will have to wait and see what makes it into the enhancements and what don't. Meanwhile here is a video from Navid Abedini, Qualcomm from IEEE Sarnoff Symposium, 2019




Related Posts:

Tuesday, October 15, 2019

Summary of #CWTEC 2019 Conference: 5G, Satellites & Magic MIMO

I was involved in helping organise yet another CW TEC conference this year. The topic was quite interesting and we had some brilliant speakers. Some of the excellent presentations were shared too, links below. Here is a very quick summary of the event, linking also to couple of excellent summaries below.

The topic was a bit unusual and it rhymed very well with the attendees which were from many different backgrounds, from 5G, communications, satellites, electronics, T&M companies, etc. Here is the opening video that will show you the motivations behind this



The day started with a breakfast briefing from Cambridge Consultants that looked at how Massive MIMO is the key to unlocking 5G User Experiences. Presentations available here.


Session 1 was titled "What has Massive MIMO ever done for us?". The narrative for the session was as follows:
Clearly the desire for more and more capacity in cellular networks has driven the industry to find more and more novel techniques. The work done over the years and boosted by Tom Marzetta’s article titled “Noncooperative Cellular Wireless with Unlimited Numbers of Base Station Antennas” has set high expectations for this emergent technology, so much so the term Magic MIMO has been coined. However, how significant is it into today’s early 5G rollout and what can we expect over the coming years? Are there still further enhancements we should expect to see?

There were 3 talks as follows:
  • Sync Architectures for 5G NR by Chris Farrow, Technical Manager, Chronos Technology (slides)
  • Three UK’s RAN transformation: Spectrum, RAN architecture strategy, Why? by Dr Erol Hepsaydir, Head of RAN and Devices Strategy and Architecture, Three UK (slides)
  • Active antenna systems in RAN: performance, challenges and evolution by Anvar Tukmanov, Wireless Research Manager, BT (slides)


Session 2 looked at "Non-Terrestrial & Hybrid Networks". The narrative for the session was as follows:
There are different initiatives underway to make satellite and other non-terrestrial networks as part of 5G. In addition, many different mobile operators have demonstrated compelling use-cases with drones, balloons and other aerostats. Other innovative approaches like European Aviation Network uses a hybrid-network using terrestrial network supported by a satellite connection as a backhaul for in-flight Wi-Fi. In addition to latency, what other challenges are stopping mass adoption of Non-terrestrial and Hybrid networks? What about advanced features like slicing, etc.?

There were 3 talks as follows:

  • Opportunities for blending terrestrial and satellite technologies by Dr Jaime Reed, Director, Consulting, Space, Defence and Intelligence, CGI (slides)
  • Non-terrestrial Networks: Standardization in 5G NR by Dr Yinan Qi, Senior 5G Researcher, Samsung R&D Institute UK (slides)
  • Satellites and 5G: A satellite operator’s perspective by Simon Watts, Principal Consultant, Avanti Communications (slides)


Session 3 looked at "5G: A Catalyst for Network Transformation". The narrative was as follows:
5G has set high expectations in the user as well as operator community. While eMBB can be supported with an upgrade of existing 4G infrastructure, URLLC and mMTC may require massive change in the network architecture. Operators have already started the transformation process with backhaul upgrades, new data centers, distributed core and cloud rollouts, etc. How are networks evolving to accommodate these deep changes? What other changes will be required in the network to support the growth until the next new generation arrives?
This session featured 3 talks as well
  • An Introduction to Open RAN Concept by Zahid Ghadialy, Senior Director, Strategic Marketing, Parallel Wireless UK & EMEA (slides)
  • Powering the successful deployment of 5G infrastructure by David George, Vice President of EMEA and APAC, Sitetracker (slides)
  • The 5G transformation: no sweet without sweat by Antonella Faniuolo, Head of Network Strategy, Planning, Digital & Optimisation, Vodafone (slides)


The final session topic was "Getting ready for Beyond-5G Era". The narrative was as follows:
Many technologies like Full duplex, etc. that were originally intended to be part of 5G were not able to make it into the standards. Along with these, what other revolutionary changes are needed to make Beyond-5G technologies not only fulfil the vision, ambition and use-cases that were originally envisaged for 5G but to take it a step further and make it a game changer.
This session featured 3 talks as well, as follows:
  • Thinking Beyond 5G: Projects and Initiatives by Alan Carlton, Vice President, InterDigital Europe (slides not available)
  • 5G Evolution: Progressive enhancement and new features for new markets by Matthew Baker, Head of Radio Physical Layer and Coexistence Standardization, Nokia (slides)
  • Why 6G’s design goals need far more than just radio & core innovation by Dean Bubley, Analyst & Futurist, Disruptive Analysis (slides not available)
And my personal highlight was that I launched World's first coloured 5G tie


Hopefully you found the presentations shared as useful. Please also read the summaries of CWTEC provided below.


Related Articles:

Thursday, August 29, 2019

LTE / 5G Broadcast Evolution


It's been a while since I last wrote about eMBMS. A report by GSA last month identified:
- 41 operators known to have been investing in eMBMS
- 5 operators have now deployed eMBMS or launched some sort of commercial service using eMBMS
- GSA identified 69 chipsets supporting eMBMS, and at least 59 devices that support eMBMS


BBC R&D are testing the use of 4G/5G broadcast technology to deliver live radio services to members of the public as part of 5G RuralFirst - one of 6 projects funded under the UK Government’s 5G Phase 1 testbeds and trials programme (link).

A press release by Samsung Electronics back in May announced that it has signed an expansion contract with KT Corporation (KT) to provide public safety (PS-LTE) network solutions based on 3GPP standard Release 13 for 10 major metropolitan regions in South Korea including Seoul by 2020. One of the features of PS-LTE that the PR listed was LTE Broadcast (eMBMS): A feature which allows real time feeds to hundreds of devices simultaneously. It enables thousands of devices to be connected at once to transfer video, images and voice simultaneously using multicast technology

Dr. Belkacem Mouhouche – Samsung Electronics Chief Standards Engineer  and Technical Manager of 5G projects: 5G-Xcast and 5G-Tours Presented an excellent overview on this topic at IEEE 5G Summit Istanbul, June 2019. His presentation is embedded below.



5G-Xcast is a 5GPPP Phase II project focused on Broadcast and Multicast Communication Enablers For the Fifth Generation of Wireless Systems.

They have a YouTube channel here and this video below is an introduction to project and the problems it looks to address.




Further Reading:

Related posts:

Tuesday, June 18, 2019

3GPP Release-16, Release-17 & Beyond...

6G Summit featured quite a few talks from people looking at evolution beyond Release-16. The future releases will still be 5G, maybe become 5.5G, like 3GPP Release-13 which was known as LTE-Advanced Pro officially was unofficially known as 4.5G.


Back at the 6G Summit in Finland, Dr. Peiying Zhu from Huawei looked at the topics being discussed for Release-17 and beyond.


Thanks to Mika Klemettinen for sharing the pictures on Twitter, as the presentation was not shared.

3GPP is working towards defining Release-16. TS 21.916 - Release description; Release 16 is still not yet available on the 3GPP reflector. Once that is available, we will know for sure about all the Rel-16 changes. Release-17 is long way away. Having said that, there is no shortage of discussions as some of these Rel-17 features were discussed in the recent RAN Plenary.
Jungwon Lee, VP, Samsung also shared a summary of 3GPP Release-16 and Rel-17 features at IEEE 5G Summit in San Diego recently. Quite a few interesting features in all the pictures above that we will no doubt look at in the future posts.

3GPP also shared a presentation recently (embedded below), looking at not only Release-15 & 16 but also looking at focus areas for Release-17




Related Posts and Articles:
  • The 3G4G Blog - Ultra Reliability: 5x9s (99.999%) in 3GPP Release-15 vs 6x9s (99.9999%) in 3GPP Release-16
  • The 3G4G Blog - Update from 3GPP on LTE & 5G Mission Critical Communications
  • 3GPP - Release 16
  • Light Reading - 5G Standards Group Struggles to Balance Tech With Politics
  • Eiko Seidel - 5G Mission Critical Networks (Proximity Services in Rel.17)
  • The 3G4G Blog - Slides and Videos from the 1st 6G Wireless Summit - March 2019
  • The 3G4G Blog - Couple of talks by NTT Docomo on 5G and Beyond (pre-6G)
  • The 3G4G Blog - China Telecom: An examination of the current industrial trends and an outlook of 6G
  • Mission Critical Communications: Mission-Critical Features for Release 17 Discussed at Latest 3GPP Meetings