UMTS-LTE in 3.5GHz

There are two new bands: 3.4-3.6 GHz and 3.6-3.8 GHz decided for Broadband Wireless Access, which are already widely available for licensing in Europe. These bands have earlier been allocated to the Fixed Service on a primary basis in Region 1. Furthermore, the 3.4-3.6 GHz band was allocated to the mobile service on a primary basis and identified for IMT at WRC 07.

These bands constitute a substantial amount of spectrum that will be available in many countries in the short term. In Europe (Region 1) both bands can be used so block sizes could be large for any duplex arrangement.

The UMTS-LTE 3500 MHz Technical Report (3GPP TR 37.801) is already available as a study of current plans in the frequency bands 3.4-3.6 GHz and 3.6-3.8 GHz for UMTS and LTE systems. Specification work is due for first publication in March 2011 (TSG#51), with a series of specifications updated or being created.

The technical report is embedded below:

3GPP TR 37.801: UMTS-LTE 3500 MHz Work Item Technical Report

View more documents from Zahid Ghadialy

Rich Communication Suite (RCS)

I have heard quite a bit about Rich Communication Suite (RCS) recently. It was supposed to start become popular by 2011 but Infonetics puts it as a little too late to become mass market anytime soon in a recent report. The new report forecasts that there would be around 6.8 million RCS subscribers worldwide by end of 2012.

Dean Bubley from Disruptive Wireless released a report some months back saying that RCS is a bit too late and inflexible and the built-in assumptions have problems which wont make it a mass market technology.

Anyway, I decided to explore the technology a bit to understand it better. Before we start digging into this, the following Youtube Video gives a good overview of what RCS is supposed to be:

The following article gives a good summary of RCS as of now:

The GSMA is welcoming a new version of Rich Communication Suite (RCS) that will enable mobile phone customers to use instant messaging (IM), live video sharing and file transfer across any device on any network operator. Deutsche Telekom, Orange, Telecom Italia, Telefonica and Vodafone intend to commercially launch RCS across several European markets from late 2011, and additional operators are expected to launch later in 2012.

Once adopted, Rich Communication Suite – e* (RCS-e) will enable customers to use these enhanced communication services across mobile networks in a simpler and more intuitive way. It is based on a specification put forward by Bharti, Deutsche Telekom, Orange, Orascom Telecom, SK Telecom, Telecom Italia, Telefonica, Telenor and Vodafone which aims to lower the hurdle and speed up the market introduction and adoption of these services.

With RCS-e, customers will be able to use IM, share live video and share files such as photos simultaneously during calls, regardless of the network or device used. RCS-e will enable users to communicate in a very natural way, much like with GSM voice and text today, and will also offer the simplicity and security customers expect from mobile operator services.

As customers open their address book, they will be able to see which communication services are available to them. They can then choose their preferred communications option. For example, a customer would see if their contact is in an area with 3G coverage and is able to receive video.

The participating operators will work with handset suppliers to ensure the service is integrated into the address books of devices, so that customers will not have to download any additional software or technically configure their handsets in order to benefit from the enhanced experience.

“Mobile operators are committed to giving their customers greater choice in the way they communicate with one and other,” said Rob Conway, CEO and Member of the Board of the GSMA. “We welcome the pragmatic approach taken by these operators to accelerate the commercialisation of RCS and simplify the experience for mobile customers and we will work to adopt this specification within the RCS initiative.”

The RCS specification is designed to be interoperable between all operators and devices, giving customers greater choice in how they communicate. The new RCS-e is the result of extensive trials and is a subset of the current RCS 2.0 standard with enhancements. It is focused on extending the principles of voice and SMS calls to deliver an advanced set of interoperable data-centric communications services.

* RCS-e is a new enhanced version of the RCS specification which is based on the use across networks of IP Multimedia Subsystem (IMS) technology, an architectural framework for delivering Internet Protocol (IP) multimedia services.

The following presentation provides a bit more detail

Rich Communication Suite (RCS)

View more presentations from Zahid Ghadialy

Eduardo Martin's blog provides some more insight into the RCS Releases:

RCS has 3 releases, each upgrades the previous one. I will focus on SIP Presence only, but RCS touches more than SIP Presence, it also works other services such as IM.

RCS Release 1 evolves around the concept of the Enhanced Address Book (EAB), an evolution of the usual address book. In short the address book is decorated with enriched information, coming from different services. This plays nicely with today's wishes for cloud stored information, unified social networks status updates, contact content such as portrait icons. I'm not going into technical details, but I for sure am someone who is aware of the design issues around SIP Presence, its hard time scaling due to huge traffic, the dozens of ugly workarounds to make it work, and RCS is a nice step forward into the right direction, there are simple decisions that deeply simplify the network design, making it more like "old" presence networks, which simply work. One remark, it takes quite an effort to define this endorsing IMS and OMA, 27 pages of functional description, plus 39 of technical realization, it should be a lesson for everyone in these standard bodies when defining more extensions or new versions.

The RCS Release 2 effort focuses on enabling access to rich communication services from a wider range of devices. In short it tells that the user has multiple devices, for instance a mobile phone and a PC, possibly concurring for services, and adapts Release 1 for that. It also introduces the Network Address Book, which is just the realization that the EAB needs to be in the network and sync the multiple user devices.

The RCS Release 3 mostly consolidates Release 2 features, and adds some minor enhancements, such as preparing the network for different usages of it, for instance users with devices, which are not connected to mobile network, instead only have broadband connections. In my humble opinion a very important and positive decision, it's about time to consider these scenarios and find out new opportunities. It is weird to say this, but the fact that the industry finally acknowledges that content sharing between two users may happen off the voice/video session is a victory, welcome to the world not session centric.

The RCS specs are available here.

More than 50 Billion Connected Devices

I blogged about the 50 Billion connected devices as predicted by Ericsson last year. With the promised 'Internet of things' and 'connected world' we may see 50 billion devices not too far in the near future. Here is a recent whitepaper from Ericsson on this topic.

Vision 2020 - 50 Billion Connected Devices - Ericsson from Ericsson France

Attach Sequence for LTE Radio

I have in past posted a complete Attach Sequence on the 3G4G website for LTE Radio Signaling but included the signalling on a few nodes. Recently I came across a signalling example in NTT Docomo technical journal which was less detailed but at a higher level and detailed signalling on these other nodes. It may be worthwhile brushing up the LTE Architecture diagram before diving into this.

With EPC, when a terminal connects to the LTE radio access system it is automatically connected to the PDN and this connected state is maintained continuously. In other words, as the terminal is registered on the network (attached) through the LTE radio access system, a communications path to the PDN (IP connectivity) is established.

The PDN to which a connection is established can be preconfigured on a per-subscriber basis, or the terminal can specify it during the attach procedure. This PDN is called the default PDN. With the always-on connection function, the radio link of the connection only is released after a set amount of time has elapsed without the terminal performing any communication, and the IP connectivity between the terminal and the network is maintained. By doing this, only the radio link needs to be reconfigured when the terminal begins actual communication, allowing the connection-delay time to be reduced. Also, the IP address obtained when the terminal attaches can be used until it detaches, so it is always possible to receive packets using that IP address.

The information flow for the terminal attaching to the network up until the connection to the PDN is established is shown in Figure 2 below.

Steps (1) to (3): When the terminal establishes a radio control link for sending and receiving control signals with the eNodeB, it sends an attach request to the MME. The terminal and MME perform the required security procedures, including authentication, encryption and integrity.

Steps (4) to (5): The MME sends an update location request message to the Home Subscriber Server (HSS), and the HSS records that the terminal is connected under the MME.

Step (6): To begin establishing a transmission path to the default PDN, the MME sends a create session request to the S-GW.

Steps (7) to (8): When the S-GW receives the create session request from the MME, it requests proxy binding update to the P-GW. The P-GW allocates an IP address to the terminal and notifies the S-GW of this information in a proxy binding acknowledgement message. This process establishes a continuous core-network communications path between the P-GW and the S-GW for the allocated IP address.

Step (9): The S-GW prepares a radio access bearer from itself to the eNodeB, and sends a create session response signal to the MME. The create session response signal contains information required to configure the radio access bearer from the eNodeB to the S-GW, including information elements issued by the S-GW and the IP address allocated to the terminal.

Steps (10) to (11) and (13): The MME sends the information in the create session response signal to the eNodeB in an initial context setup request signal. Note that this signaling also contains other notifications such as the attach accept, which is the response to the attach request. When the terminal receives the attach accept in Step (11), it sends an attach complete response to the MME, notifying that processing has completed.

Step (12): The eNodeB establishes the radio data link and sends the attach accept to the terminal. It also configures the radio access bearer from the eNodeB to the S-GW and sends an initial context setup response to the MME. The initial context setup response contains information elements issued by the eNodeB required to establish the radio access bearer from the S-GW to the eNodeB.

Steps (14) to (15): The MME sends the information in the initial context setup response to the S-GW in a modify bearer request signal. The S-GW completes configuration of the previously prepared radio bearer from the S-GW to the eNodeB and sends a modify bearer response to the MME.

Through these steps, a communications path from the terminal to the P-GW is established, enabling communication with the default PDN.

If the terminal performs no communication for a set period of time, the always-on connection function described above releases the radio control link, the LTE radio data link, and the LTE radio access bearer, while maintaining the core network communications path.

After the terminal has established a connection to the default PDN, it is possible to initiate another connection to a different PDN. In this way it is possible to manage PDNs according to service.

For example the IMS PDN, which provides voice services by packet network, could be used as the default PDN, and a different PDN could be used for internet access.

To establish a connection to a PDN other than the default PDN, the procedure is the same as the attach procedure shown in Fig.2, excluding Steps (4) and (5).

TERMS:

Attach: Procedure to register a terminal on the network when, for example, its power is switched on.

Detach: Procedure to remove registration of a terminal from the network when, for example, its power is switched off.

Integrity: Whether the transmitted data is complete and has not been falsified. Here we refer to pre-processing required to ensure integrity of the data.

Bearer: A logical transmission path established, as between the S-GW and eNodeB.

Context setup: Configuration of information required for the communications path and communications management.

Circuit Switched Fallback (CSFB): A Quick Primer

I have explained CSFB with basic signalling here and there is a very interesting Ericsson whitepaper explaining all Voice issues in LTE here.

The following CSFB details have been taken from NTT Docomo Technical Journal:

The basic concept of CS Fallback is shown in Figure 1. Given a mobile terminal camping on LTE, a mobile terminating voice call arrives at the terminal from the existing CS domain via EPC. On receiving a paging message, the mobile terminal recognises that the network is calling the mobile terminal for CS-based voice and therefore switches to 3G. The response confirming the acceptance of a call request is then sent from the mobile terminal to the 3G-CS system, and from that point on, all call control for the voice service is performed on the 3G side.

The CS Fallback consists of a function to notify a mobile terminal of a call request from the CS domain and combined mobility management functions between CS domain and EPC for that

purpose. The network architecture of CS Fallback is shown in Figure 2.

One of the remarkable characteristics of the EPC supporting CS Fallback is that it connects the Mobile Switching Center (MSC) and Visited Location Register (VLR) in the 3G CS domain

with the Mobility Management Entity (MME), which provides EPC mobility management functionality. The interface connecting MSC/VLR and MME is called an SGs reference point. This

interface is based on the concept of the Gs reference point that exchanges signalling with MSC, which connects to the Serving General Packet Radio Service Support Node (SGSN), a 3G

packet switch. The SGs provides nearly all the functions provided by the existing Gs.

The CS Fallback function uses this SGs reference point to transfer the mobile terminating call requests from the CS domain to LTE. It also provides combined mobility management

between the 3G CS domain and the EPC to enable this transfer to take place.

Combined Mobility Management between CS Domain and EPC Network:

A mobile communications network must always know where a mobile terminal is located to deliver mobile terminating service requests to the mobile user on the mobile terminating side. The procedure for determining terminal location is called “mobility management". As a basic function of mobile communications, 3G and LTE each provide a mobility management function.

To complete a call using the CS Fallback function, the CS domain needs to know which LTE location registration area the mobile terminal is currently camping on. To this end, the MME must correlate mobility management control of the CS domain with that of EPC and inform MSC/VLR that the mobile terminal is present in an LTE location registration area.

The 3G core network already incorporates a function for linking mobility management of the CS domain with that of the Packet Switched (PS) domain providing packet-switching functions. As described above, the CS domain and PS domain functions are provided via separate switches. Thus, if combined mobility management can be used, the mobility management procedure for the terminal only needs to be performed once, which has the effect of reducing signal traffic in the network. This concept of combined mobility management is appropriated by the CS Fallback function. Specifically, MSC/VLR uses the same logic for receiving a location registration request from SGSN as that for receiving a location registration request from MME. This achieves a more efficient combined mobility management between the CS domain and EPC while reducing the development impact on MSC.

As described above, a mobile terminal using LTE cannot use 3G at the same time. This implies that the MME, which contains the LTE location registration area (Tracking Area (TA)), is unable to identify which MSC/VLR it should send the mobility management messages to from the TA alone. To solve this problem, the mapping of TAs and 3G Location Areas (LA) within MME has been adopted. The concept behind TA/LA mapping is shown in Figure 3. Here, MME stores a database that manages the correspondence between physically overlapping TAs and LAs. This information is used to determine which MSC/VLR to target for location registration.

The combined TA/LA update procedure for CS fallback is shown in detail in Figure 4. First, the mobile terminal sends to the MME a Tracking Area Update (TAU) request message indicating a combined TAU and the current TA in which the mobile terminal is currently present (Fig. 4 (1)). The MME then performs a location update procedure towards Home Subscriber Server (HSS), which is a database used for managing subscriber profiles (Fig. 4 (2)). Next, the MME uses the TA/LA correspondence database to identify the corresponding LA and the MSC/VLR that is managing that area, and uses the SGs reference point to send a Location Area Update (LAU) request message to the MSC/VLR together with the LA so identified (Fig. 4 (3)). The MSC/VLR that receives the LAU request message stores the correspondence between the ID of the MME originating the request and an ID such as the International Mobile Subscriber Identity (IMSI) that identifies the subscriber (Fig. 4 (4)). This enables the MSC/VLR to know which MME the mobile terminal is currently connected to and that the mobile terminal is camping on LTE. Following this, the MSC/VLR performs a location registration procedure with the HSS (Fig. 4 (5)). Finally, the MSC/VLR informs the MME of temporary user identity (Temporary Mobile Subscriber Identity (TMSI)), which is used at the time of a mobile terminating call in the CS domain, and indicates that location registration has been completed. The MME then informs the mobile terminal of the TMSI and of the LA that the mobile terminal has been registered with thereby completing combined location registration (Fig. 4 (6) (7)).

CS Fallback Call Control Procedures - Mobile Originating Call:

To originate a voice call using the CS Fallback function, a mobile terminal in the LTE location registration area must first switch (fall back) to 3G. The mobile-originating voice call procedure is shown in Figure 5. To originate a call, the mobile terminal begins by sending a CS fallback service request message to the MME (Fig. 5 (1)). Since a packet-communications transmission path (bearer) must always exist in EPC for the purpose of providing an always-on connection, the bearer also has to be handed over to 3G. To accomplish this, the MME issues a handover command to the mobile terminal in LTE and initiates a handover procedure (Fig. 5 (2)). The mobile terminal changes its radio from LTE to 3G during this procedure (Fig. 5 (3)). On completion of handover, the mobile terminal issues an originating request for voice service to the MSC/VLR. A voice-call connection is then established using an existing calloriginating procedure on 3G and the CS Fallback procedure is completed (Fig. 5(4)).

CS Fallback Call Control Procedures - Mobile Terminating Call:

The mobile terminating voice call procedure using CS Fallback is shown in Figure 6. When the MSC/VLR receives a message indicating the occurrence of a mobile terminating call (Fig. 6 (1)), the MSC/VLR identifies the corresponding MME from the call information received (Fig. 6 (2)). Then, the MSC/VLR sends a paging message (Fig. 6 (3)) towards the MME. Next, the MME sends a paging message to the mobile terminal in LTE (Fig. 6 (4)). This paging message includes an indication that the call is a CS service, and on identifying the call as such, the mobile terminal sends a CS fallback service request signal to the MME (Fig. 6 (5)). Following this, a handover procedure to 3G as described above takes place (Fig. 6 (6), (7)). The mobile terminal that is now switched to 3G sends a paging response message to the MSC/VLR at which it is registered (Fig. 6 (8)). Finally, an existing mobile terminating call procedure on 3G is executed and the CS Fallback procedure is completed (Fig. 6 (9)).

Quick primer on Push-to-talk (PTT)

Push to Talk (PTT)

View more documents from Zahid Ghadialy.

MBMS in LTE Release-9

From NTT Docomo Technical Journal:

MBMS is a bearer service for broadcast/multicast transmission of data, to transmit the same information to all interested UEs in an area over a common bearer. Note that MBMS has been supported in UTRA since Release 6.

LTE Release 9 supports basic MBMS functionality not requiring complex control. One of the main features is support for MBMS Single Frequency Network (MBSFN) transmission. With MBSFN transmission eNBs in the MBSFN area transmit the same signal simultaneously using the same time-frequency resource. The UE receives the combined signals as a single, strong signal, improving coverage and signal quality without much additional complexity in the UE. By applying MBSFN transmission, a 3GPP study concluded that to provide 95% coverage with a packet error rate of 1%, a spectral efficiency of 3 bit/s/Hz or greater can be achieved.

The logical architecture for MBMS in LTE is shown in Figure 4. The MBMS gateway (GW) distributes data received from the Broadcast Multicast Service Center (BMSC) to the relevant eNBs by IP multicast. The Multi-Cell Multicast Coordination Entity (MCE) specifies the radio resources to be used by eNBs comprising the MBSFN and ensures that the content is synchronized. To support MBMS, logical channels, namely Multicast Traffic Channel (MTCH) and Multicast Control Channel (MCCH), and a transport channel, namely Multicast Channel (MCH), are defined (Figure 5).

Relation between 3GPP Release-8 and Release-9

Five quick videos from Mobile World Congress 2011 - 3

More on HTC Freestyle and Brew OS here.

More on Live translating service here.

Ps: I know there are 6 videos ;)

Five quick videos from Mobile World Congress 2011 - 2