Sunday, May 29, 2016

5G & 802.11ax


Samsung is one of the 5G pioneers who has been active in this area for quite a while, working in different technology areas but also making results and details available for others to appreciate and get an idea on what 5G is all about. 

I published a post back in 2014 from their trials going on then. Since then they have been improving on these results. They recently also published the 5G vision paper which is available here and here.



In the recent 5G Huddle, Raj Gawera from Samsung gave an excellent presentation (below) on the topic of "The future connected world". 



What we really liked is how closely 5G and 802.11ax can be considered aligned, not only in terms of requirements but also the roadmap.

Anyway, here is the presentation embedded below. Let me know what you think in the comments below.


Sunday, May 22, 2016

QCI Enhancements For Mission Critical Communications

Its been quite a while since I posted about QCI and end-to-end bearer QoS in EPC. In LTE Release-12 some new QCI values were added to handle mission critical communications.


This picture is taken from a new blog called Public Safety LTE. I have discussed about the Default and Dedicated bearers in an earlier post here (see comments in that post too). You will notice in the picture above that new QCI values 65, 66, 69 & 70 have been added. For mission critical group communications new default bearer 69 would be used for signalling and dedicated bearer 65 will be used for data. Mission critical data would also benefit by using QCI 70.


LTE for Public Safety that was published last year provides a good insight on this topic as follows:

The EPS provides IP connectivity between a UE and a packet data network external to the PLMN. This is referred to as PDN connectivity service. An EPS bearer uniquely identifies traffic flows that receive a common QoS treatment. It is the level of granularity for bearer level QoS control in the EPC/E-UTRAN. All traffic mapped to the same EPS bearer receives the same bearer level packet forwarding treatment. Providing different bearer level packet forwarding treatment requires separate EPS bearers.

An EPS bearer is referred to as a GBR bearer, if dedicated network resources related to a Guaranteed Bit Rate (GBR) are permanently allocated once the bearer is established or modified. Otherwise, an EPS bearer is referred to as a non-GBR bearer.

Each EPS bearer is associated with a QoS profile including the following data:
• QoS Class Identifier (QCI): A scalar pointing in the P-GW and eNodeB to node-specific parameters that control the bearer level packet forwarding treatment in this node.
• Allocation and Retention Priority (ARP): Contains information about the priority level, the pre-emption capability, and the pre-emption vulnerability. The primary purpose of the ARP is to decide whether a bearer establishment or modification request can be accepted or needs to be rejected due to resource limitations.
• GBR: The bit rate that can be expected to be provided by a GBR bearer.
• Maximum Bit Rate (MBR): Limits the bit rate that can be expected to be provided by a GBR bearer.

Following QoS parameters are applied to an aggregated set of EPS bearers and are part of user’s subscription data:
• APN Aggregate Maximum Bit Rate (APN-AMBR): Limits the aggregate bit rate that can be expected to be provided across all non-GBR bearers and across all PDN connections associated with the APN.
• UE Aggregate Maximum Bit Rate (UE-AMBR): Limits the aggregate bit rate that can be expected to be provided across all non-GBR bearers of a UE. The UE routes uplink packets to the different EPS bearers based on uplink packet filters assigned to the bearers while the P-GW routes downlink packets to the different EPS bearers based on downlink packet filters assigned to the bearers in the PDN connection.

Figure 1.5 above shows the nodes where QoS parameters are enforced in the EPS system.

Related links:



Saturday, May 14, 2016

4G / LTE by stealth


In the good old days when people used to have 2G phones, they were expensive but all people cared about is Voice & SMS.


The initial 3G phones were bulky/heavy with small battery life, not many apps and expensive. There was not much temptation to go and buy one of these, unless it was heavily subsidised by someone. Naturally it took a while before 3G adoption became common. In the meantime, people had to go out of their way to get a 3G phone.

With 4G, it was a different story. Once LTE was ready, the high end phones started adding 4G in their phones by default. What it meant was that if the operator enabled them to use 4G, these devices started using 4G rather than 3G. Other lower end devices soon followed suit. Nowadays, unless you are looking for a real cheap smartphone, your device will have basic LTE support, maybe not advanced featured like carrier aggregation.

The tweets below do not surprise me at all:



This is what I refer to as 4G or LTE by stealth.

Occasionally people show charts like these (just using this as a reference but not pin pointing anyone) to justify the 5G growth trajectory with 4G in mind. It will all depend on what 5G will mean, how the devices look like, what data models are on offer, what the device prices are like, etc.

I think its just too early to predict if there will be a 5G by stealth.

Monday, May 2, 2016

Does 5G need 'Next Generation' of Internet Protocols?

I have often heard Martin Geddes mention that the Internet is broken, the protocols (TCP/IP) are wrong and if we want to continue the way our data usage is going, we need to define new protocols (see here for example). It was good to find out last week at 5G Huddle that ETSI is already working on this.


The TCP/IP protocol suite has undoubtedly enabled the evolution of connected computing and many other developments since its invention during the 1970’s. Thanks to the development and ubiquity of this protocol stack, we have managed to build an Internet on which we are dependent as a communications tool, an information storage and distribution tool, a marketing channel and a sales and distribution platform, for consumers and for businesses large and small.

However, the industry has reached a point where forward leaps in the technology of the local access networks will not deliver their full potential unless, in parallel, the underlying protocol stacks used in core and access networks evolve. The development of future 5G systems presents a unique opportunity to address this issue, as a sub-optimal protocol architecture can negate the huge performance and capacity improvements planned for the radio access network.

ETSI has created an Industry Specification Group to work on Next Generation Protocols (NGP ISG), looking at evolving communications and networking protocols to provide the scale, security, mobility and ease of deployment required for the connected society of the 21st century.

The NGP ISG will identify the requirements for next generation protocols and network architectures, from all interested user and industry groups. Topics include:

  • Addressing
  • Security, Identity, Location, Authorization, Accounting/Auditing and Authentication
  • Mobility
  • Requirements from Internet of Things
  • Requirements from video and content distribution
  • Requirements from ultra‐low latency use cases from different sectors (i.e. automotive)
  • Requirements from network operators (e.g. challenges with E2E encrypted content)
  • Requirements from eCommerce
  • Requirements for increased energy efficiency within the global ICT sector.


This ISG is seen as a transitional group i.e. a vehicle for the 5G community (and others of interest) to first gather their thoughts and prepare the case for the Internet community’s engagement in a complementary and synchronised modernisation effort.

The ISG provides a forum for interested parties to contribute by sharing research and results from trials and developments in such a way that a wider audience can be informed. Other standards bodies will be involved so that parallel and concerted standardization action can take place as a further step in the most appropriate standards groups.

Andy Sutton, chair of the NGP recently gave the following presentation in 5G Huddle:



Please feel free to add your opinions in the comments.

Further reading:

**** Added 05/06/2016:20.00 ****
A whitepaper published by ETSI on this topic is available here and embedded below:


Saturday, April 23, 2016

5G & Accident Free Driving


ETSI recently held a workshop titled "5G: From Myth to Reality". There were some interesting presentations and discussions, hopefully I will get a chance to write a bit more about it.

One interesting presentation was how 5G will make accident free driving a reality. While the current approach is to use the 802.11p standards that uses the license exempt 5.9GHz band, there is a possibility of enhancements based on 5G


As the final 2 slides say, What could be the use cases for 5G in vehicles? The answer suggested:

  • Map update for highly automatic driving - Instantly update the map of vehicle's surrounding. The challenge of this use case is that the vehicle is currently in the tile that needs to be updated, hence a very quick update is required. 
  • Precise Positioning high speed, no GPS, support for vehicles without high precision location tracking like cars 
  • Audio / Video Streaming (Entertainment) 
  • Online Gaming - side jobs 
  • Sensor- and State Map Sharing (Sensor Raw Data) - Transmit raw sensor data such that others can use their own classifiers to infer decisions
  • Camera and Radar sharing to improve visibility, including See-Through Share sensor information to augment ego vehicle's view. Allows for better visibility in presence of obstructing vehicles, heavy rain / fog, etc. 
  • Short-Term Sensor sharing for crash mitigation - Mitigate crash between multiple vehicle by last-minute traffic exchange 
  • Traffic forwarding using cars as relays Extend coverage or improve efficiency by using the car as a relay 
  • Teleoperated Driving "Let car be controlled by off-site driver / car operator e.g. car sharing, taxi operator, …“ 
  • Augemented Reality, e.g. Daytime-Visibility at night)

Here is the complete presentation, let me know what you think:



Sunday, April 17, 2016

NTT Docomo's 5G Treasure Trove


NTT Docomo's recent technical journal has quite a few interesting 5G articles. While it is well known that 5G will be present in Japan in some or the other shape by 2020, for the summer Olympics, NTT Docomo started studying technologies for 5G in 2010. Some of these have probably ended in 4.5G, a.k.a. LTE-Advanced Pro.

While there are some interesting applications and services envisioned for 5G, I still think some of these can be met with LTE-A and some of them may not work with the initial versions of 5G

As far as 5G timetable is concerned, I recently posted a blog post on this topic here. Initial versions of 5G will have either little or no millimetre wave (mmWave) bands. This is because most of these would be finalised in 2019 after WRC-19 has concluded. It may be a touch challenge to move all the existing incumbents out of these bands or agree of a proper sharing mechanism.

'5G+' or '5G phase 3' will make extensive use of these higher frequency bands extensively in addition to the low and mid frequency bands. For anyone not familiar with different 5G phases, please see this earlier post here.

Enhanced LTE (or eLTE) is probably the same as LTE-Advanced Pro. Docomo believes that the initial 5G deployment would include new RAT but existing 4G core network which would be enhanced later for 5G+. Some of this new RAT technologies are discussed as well.

Core Network evolution is another interesting area. We looked at a possible architecture evolution here. To quote from the magazine:

The vision for future networks is shown in Figure 3. A future network will incorporate multiple radio technologies including LTE/LTE-Advanced, 5G New Radio Access Technology (RAT), and Wi-Fi, and be able to use them according to the characteristics of each service.

Utilizing virtualization technologies, network slices optimized for service requirements such as high efficiency or low delay can be created. Common physical devices such as general-purpose servers and Software Defined Network (SDN) transport switches will be used, and these networks will be provided to service providers. Network slices can be used either on a one service per network basis to increase network independence for originality or security, or with multiple services on one slice to increase statistical multiplexing gain and provide services more economically.

The specific functional architecture and the network topology for each network slice are issues to be studied in the future, but in the case of a network slice accommodating low latency services, for example, GateWay (GW) functions would need to be relatively close to radio access, service processing would be close to terminals, and routing control capable of finding the shortest route between terminals would be necessary to reduce latency. On the other hand, a network slice providing low volume communications to large numbers of terminals, such as with smart meters, would need functionality able to transmit that sort of data efficiently, and such terminals are fixed, so the mobility function can be omitted. In this way, by providing network slices optimized according to the requirements of each service, requirements can be satisfied while still reducing operating costs.

The magazine is embedded below and available to download from here:





See Also:

Saturday, April 2, 2016

Some interesting April Fools' Day 2016 Technology Jokes

When I posted April Fools' jokes on the blog last couple of years (see 2014 & 2015) , they seem to be very popular so I thought its worth posting them this year too. If I missed any interesting ones, please add in comments.


The one I really liked best is the Samsung Internet of Trousers (IoT) featuring:

Wi-Fly: Gone are the days of unnoticed, unzipped trouser zippers upon exiting the restroom. Should your fly remain open for more than three minutes, the ZipARTIK module will send a series of notifications to your smartphone to save you from further embarrassment.

Get Up! Alert: Using pressure sensors, Samsung’s intelligent trousers detect prolonged periods of inactivity and send notifications to ‘get up off of that thing’ at least once an hour. Should you remain seated for more than three hours, devices embedded in each of the rear pockets send mild electrical shocks to provide extra motivation.

Keep-Your-Pants-On Mode: Sometimes it’s easy to get carried away with the moment. The Samsung Bio-Processor in your pants checks your bio-data including your heart rate and perspiration level. If these indicators get too high, Samsung’s trousers will send you subtle notifications as a reminder of the importance of keeping your cool.

Fridge Lock: If the tension around your waist gets too high, the embedded ARTIK chip module will send signals to your refrigerator to prevent you from overeating. The fridge door lock can then only be deactivated with consent from a designated person such as your mother or significant other.



Microsoft has an MS-DOS mobile in mind for this day. I wont be surprised if a real product like this does become popular with older generation. I personally wouldn't mind an MS-DOS app on my mobile. Here is a video:





It would have been strange if we didnt have a Robot for a joke. Domino's have introduced the Domimaker. Here's how it works:





T-Mobile USA is not shy pulling punches on its rivals with the Binge On data plan where it lets people view certain video channels without using up their data. Here is the video and more details on mashable.



Samsung ExoKinetic helps your phone self-charge

Google had quite a few pranks as always. I will ignore 'mic drop' which backfired and caused them headache.

Google Express has a new delivery mechanism, just for the April Fool's day. (There has to be one drone idea)





Google Cardboard Plastic is an interesting one too. Here is the video:


Finally, its the Google Fiber Teleportation.



Other interesting ones:

Thursday, March 31, 2016

Smartphones: It came, It saw, It conquered


Smartphones have replaced so many of our gadgets. The picture above is a witness to how all the gadgets have now been replaced by smartphones. To some extent hardware requirements have been transferred to software requirements (Apps). But the smartphones does a lot more than just hardware to software translation.

Most youngsters no longer have bookshelves or the encyclopedia collections. eBooks and Wikipedia have replaced them. We no longer need sticky notes and physical calendars, there are Apps for them.

Back in 2014, Benedict Evans posted his "Mobile is Eating the world" presentation. His presentation has received over 700K views. I know its not as much as Justin Bieber's songs views but its still a lot in the tech world. He has recently updated his presentation (embedded below) and its now called "Mobile ate the world".

Quite rightly, the job is not done yet. There is still long way to go. The fact that this tweet has over 600 retweets is a witness to this fact. Here are some of the slides that I really liked (and links reltaed to them - opens in a new window).
While we can see how Smartphones are getting ever more popular and how other gadgets that its replacing is suffering, I know people who own a smartphone for everything except voice call and have a feature phone for voice calls. Other people (including myself) rely on OTT for calls as its guaranteed better quality most of the time (at least indoors).

Smartphones have already replaced a lot of gadgets and other day to day necessities but the fact is that it can do a lot more. Payments is one such thing. The fact that I still carry a physical wallet means that the environment around me hasn't transformed enough for it to be made redundant. If I look in my wallet, I have some cash, a credit and debit card, driving license, some store loyalty cards and my business cards. There is no reason why all of these cannot be digital and/or virtual.
A Connected Car is a Smartphone on/with wheels.


A connected drone can be considered as smartphone that flies.
The Smartphones today are more than just hardware/software. They are a complete ecosystem. We can argue if only 2 options for OSs is good or bad. From developers point of view, two is just about right.
Another very important point to remember that smartphones enable different platforms.

While we may just have messaging apps that are acting as platforms, there is a potential for a lot more.

Here is the presentation, worth reflecting on each slide:



If you haven't heard Benedict Evans speak, you can refer to a recent video by him on this topic:



Related posts on the web:



Tuesday, March 29, 2016

5G Study Item (SI) for RAN Working Groups Approved


This is from a Linkedin post by Eiko Seidel.

Earlier this month (7-10 March 2016), 3GPP TSG RAN Plenary RAN Meeting #71 took place in Göteborg, Sweden. The first 5G study item for the working groups is was approved. It involves RAN1, RAN2, RAN3 and RAN4. For details please have a look at RP-160671

The study aims to develop an next generation radio access technology to meet a broad range of use cases including enhanced mobile broadband, massive MTC, critical MTC, and additional requirements defined during the RAN requirements study. 

The new RAT will consider frequency ranges up to 100 GHz. 

Detailed objectives of the study item is a single technical framework addressing all usage scenarios, requirements and deployment scenarios including Enhanced mobile broadband, Massive machine-type-communications and Ultra reliable and low latency communications. 

The new RAT shall be inherently forward compatible. It is assumed that the normative specification would occur in two phases: Phase I (to be completed in June 2018) and Phase II (to be completed in December 2019). 

The fundamental physical layer signal waveform will be based on OFDM, with potential support of non-orthogonal waveform and multiple access. Basic frame structure(s) and Channel coding scheme(s) will be developed. 

Architecture work is going to be interesting, with a study of different options of splitting the architecture into a “central unit” and a “distributed unit”, with potential interface in between, including transport, configuration and other required functional interactions between these nodes. Furthermore RAN-CN interface and functional split needs to be studied, the realization of Network Slicing, QoS support etc.


The proposed timeline for 5G was also presented in a presentation as follows:



Friday, March 25, 2016

State of LTE & Connectivity


There are some reports that have been recently published on connectivity and connection numbers. This post intends to provide this info.

Facebook released "State of connectivity 2015" report. As can be seen in the picture above, at the end of 2015, estimates showed that 3.2 billion people were online. This increase (up from 3 billion in 2014) is partly attributed to more affordable data and rising global incomes in 2014. Over the past 10 years, connectivity increased by approximately 200 to 300 million people per year.

While this is positive news in terms of growth, it also means that globally, 4.1 billion people were still not internet users in 2015.

The four key barriers to internet access include:

Availability: Proximity of the necessary infrastructure required for access.
Affordability: The cost of access relative to income.
Relevance: A reason for access, such as primary language content.
Readiness: The capacity to access, including skills, awareness and cultural acceptance.

The PDF version of report is available here.


The number of LTE users crossed 1 Billion, end of 2015 according to a report by GSA. OpenSignal has a summary blog post on this here.



Finally, Open Signal has published Global State of LTE Market report that provides coverage, speeds and a lot more information.

South Korea and Singapore have set themselves apart from the main body of global operators, providing both superior coverage and speed. The biggest standouts were South Korea’s Olleh and Singapore’s Singtel. Olleh excelled in coverage, but also provided one of the fastest connections speeds in our report, 34 Mbps. Meanwhile Singtel hit the 40 Mbps mark in speed while still maintaining a coverage rating of 86%. There are other notable country clusters in the upper right-hand quadrant as well, for instance operators from the Netherlands, Canada and Hungary.

Meanwhile, other countries have staked positions for themselves in specific regions of the plot. U.S. and Kuwaiti operators are tightly clustered in the lower right, meaning they offer excellent coverage but poor 4G speeds. Japan and Taiwan congregate in the middle far right with their exceptional coverage but only average speeds. Most of New Zealand and Romania’s operators hover at the center top of the chart, indicating impressive bandwidth but a general lack of availability.

Its makes interesting reading, PDF available here.

*** Added Later: 25/03/16:12.15 ***

A good breakdown of LTE subscriptions by countries by Ovum: