Right now, Speed Tests are being described as 5G killer apps.
A good point by Benedict Evans
Everyone is excited and want to see how fast 5G networks can go. If you use Twitter, you will notice loads and loads of speed tests being done on 5G. An example can be seen above.
I recently heard Phil Sheppard, Director of Strategy & Architecture, '3 UK' speak about their 5G launch that is coming up soon. Phil clearly mentioned that because they have a lot more spectrum (see Operator Watch blog post
here and
here) in Capacity Layer, their 5G network would be faster than the other UK operators. He also provided rough real world Peak Speeds for Three and other operators as can be seen above. Of course the real world speeds greatly depend on what else is going on in the network and in the cell so this is just a guideline rather than actual advertised speeds.
I have explained multiple times that all 5G networks being rolled out today are Non-Stand Alone (NSA) 5G networks. If you don't know what SA and NSA 5G networks are,
check this out. As you can see, the 5G NSA networks are actually 4G Carrier Aggregated Networks + 5G Carrier Aggregated Networks. Not all 4G spectrum will be usable in 5G networks but let's assume it is.
To calculate the theoretical maximum speed of 5G NSA networks, we can calculate the theoretical maximum 4G Network speeds + theoretical maximum 5G Network speeds.
I have looked at theoretical calculation of max LTE Carrier Aggregated Speeds
here. Won't do calculation here but assuming 3CA for any network is quite possible.
I also looked at theoretical calculation of 5G FDD New Radio
here but then found a website that helps with 5G NR calculation
here.
If we calculate just the 5G part, looking at the picture from Three, we can see that they list BT/EE & O2 speeds as 0.61 Gbps or 610 Mbps, just for the 5G part.
Looking at the calculation, if we Input Theoretical max values in this equation:
Calculating just for DL
J - number of aggregated component carriers,
maximum number (3GPP 38.802): 16
input value: 1
v(j)Layers - maximum number of MIMO layers ,
3GPP 38.802: maximum 8 in DL, maximum 4 in UL
input value: 8
Q(j)m modulation order (3GPP 38.804)
For UL and DL Q(j)m is same (QPSK-2, 16QAM-4, 64QAM-6, 256QAM-8)
input value: 8 (256QAM)
f(j) Scaling factor (3GPP 38.306)
input value: 1
FR(j) Frequency Range 3GPP 38.104:
FR1 (450 MHz – 6000 MHz) ะธ FR2 (24250 MHz – 52600 MHz)
input value: FR1
ยต(j) -value of carrier configuration (3GPP 38.211)
For DL and UL ยต(j) is same (ยต(0)=15kHz, ยต(1)=30kHz, ยต(2)=60kHz, ยต(3)=120kHz)
input value: 0 (15kHz)
BW(j)- band Bandwidth, MHz (3GPP 38.104),
should be selected with Frequency Range and ยต(i) configuration:
input value: BW:40MHz FR1 ยต:15kHz:
Enter a PRB value (if other)
default: 0
Rmax (if you don't know what is it, don't change)
Value depends on the type of coding from 3GPP 38.212
(For LDPC code maximum number is 948/1024 = 0.92578125)
default: 0.92578125
*** Only for TDD ***
Part of the Slots allocated for DL in TDD mode,
where 1 = 100% of Slots (3GPP 38.213, taking into account Flexible slots).
Calculated as: the number of time Slots for DL divided by 14
default value: 0.857142
Part of the Slots allocated for UL in TDD mode,
where 1 = 100% of Slots (3GPP 38.213, taking into account Flexible slots).
Calculated as: 1 minus number of Slots for DL
default value: 0.14285800000000004
Calculated 5G NR Throughput, Mbps:
1584
As you may have noticed, BTE/EE has 40 MHz spectrum while Vodafone in UK have 50 MHz of spectrum.
Changing
BW(j)- band Bandwidth, MHz (3GPP 38.104),
should be selected with Frequency Range and ยต(i) configuration:
input value: BW:50MHz FR1 ยต:15kHz:
Calculated 5G NR Throughput, Mbps:
1982
Now Three UK has 100 MHz, immediately available for use. So changing
ยต(j) -value of carrier configuration (3GPP 38.211)
For DL and UL ยต(j) is same (ยต(0)=15kHz, ยต(1)=30kHz, ยต(2)=60kHz, ยต(3)=120kHz)
input value: 1 (30kHz)
BW(j)- band Bandwidth, MHz (3GPP 38.104),
should be selected with Frequency Range and ยต(i) configuration:
BW:100MHz FR1 ยต:30kHz:
Calculated 5G NR Throughput, Mbps:
4006
In theory, a lot of speed is possible with the 100 MHz bandwidth that Three will be able to use. We will have to wait and see who can do a theoretical max SpeedTest. In the meantime remember that a 1Gbps speed test will use over 1 GB of data.
Related Posts:
