Prof. Ted Rappaport Keynote at EuCNC & 6G Summit 2023 on 'Looking Towards the 6G Era - What we may expect, and why'

Prof. Ted Rappaport has featured a few times in our blog posts (see here and here). Today we look at his recent keynote at the EuCNC & 6G Summit 2023 on the topic 'Looking Towards the 6G Era - What we may expect, and why'. The abstract of the talk says:

Recent work has shown that the fundamentals of the radio propagation channel will enable mobile communications all the way to 900 GHz, offering bandwidths of tens of GHz. An amazing fact that is all but disregarded is that the three fundamental technological breakthroughs of 5G, namely millimeter wave technology, small cell densification, and massive multiple-input multiple-output (massive-MIMO) antenna systems, are paving the way for the next several decades of the wireless industry. This talk demonstrates how the 5G era will futureproof wireless networks as we enter the 6G era and beyond — an era of wireless cognition and human-style computing. In fewer than 20 years, wireless networks will carry information at the computation speed of the human brain. Yet, how will engineers ensure that we build these networks with sustainability and power efficiency in mind? This talk offers some solutions and promising areas of exploration to ensure the future 6G era is lightning fast yet kind to planet earth.

Next G Alliance has a nice short report looking at 'Terminology for Frequency Ranges'. Handy and useful charts - https://t.co/kfJFxcdUDo via @atisupdates @NextGAlliance #Free5Gtraining #3G4G5G #ATIS #NGA #5G #B5G #6G #Frequency #Spectrum #Bands #mmWave #cmWave #THz pic.twitter.com/Nyoh1X0asX

— Free 5G Training (@5Gtraining) July 25, 2023

Recently I had a discussion about mmWave, sub-THz, THz, etc. This chart in the Tweet above is handy with deciphering the 5G/6G spectrum terminology.

Prof. Rappaport covered quite a few topics on spectrum above 100 GHz and made a strong case for mmWave and Terahertz. The mmWave adoption for 5G hasn't yet taken off so we will have to see how enthusiastic the industry is for even higher frequencies. The other keynotes from the conference (see references below) argued for cmWave as the mid-band for 6G. We will have to wait and see where all this discussion goes.

The talk is embedded below:

Related Posts: 

• Free 6G Training: Recent Advances on Terahertz (THz) communications
• The 3G4G Blog - 6G: Above 100 GHz and Terahertz (THz) Frequencies
• The 3G4G Blog: Spectrum for 5G NR beyond 52.6 GHz
• Free 6G Training: Ericsson's Keynote at EuCNC & 6G Summit 2023 on '6G – Connecting a cyber-physical world'
• Free 6G Training: Nokia's and Docomo's Joint Keynote at EuCNC & 6G Summit 2023 on '6G getting into next gear'
• Free 6G Training: Huawei's Keynote at EuCNC & 6G Summit 2023 on 'On the Convergence Route for 6G'
• Free 6G Training: EuCNC & 6G Summit 2023 Panel Session on 'Sustainability challenges and opportunities for 6G'
• Free 6G Training: Samsung's 6G Spectrum Whitepaper Discusses Candidate Bands
• Free 6G Training: Do we need more Bandwidth or Higher Bandwidth Efficiency?
• Free 6G Training: 7 Defining Features of Terahertz (THz) Wireless Communications Systems 

Tutorial: A Quick Introduction to 3GPP

We recently made a beginners tutorial explaining the need for The 3rd Generation Partnership Project (3GPP), its working, structure and provides useful pointers to explore further. The video and slides are embedded below.

Beginners: An Quick Introduction to 3GPP from 3G4G

You can download the slides from here.

3GPP experts, what else? pic.twitter.com/Gd7TkwwCwF

— 3G4G (@3g4gUK) February 14, 2023

Related Posts: 

• The 3G4G Blog: 3GPP TSG RAN and TSG SA Release-19 Workshop Summary
• The 3G4G Blog: ATIS Webinar on "3GPP Release 18 Overview: A World of 5G-Advanced"
• The 3G4G Blog: 5G Reality Check - Data Rates
• The 3G4G Blog: 3GPP Release-18 Work Moves Into Focus as Release-17 Reaches Maturity
• The 3G4G Blog: 3GPP Presentations from CEATEC Japan 2021
• The 3G4G Blog: 3GPP Release 17 Description and Summary of Work Items
• The 3G4G Blog: 3GPP Release 16 Description and Summary of Work Items 

Small Data Transmission (SDT) in LTE and 5G NR

One of the features that was introduced part of 5G NR 3GPP Release 17 is known as Small Data Transmission (SDT). When small amount of data, in case of an IoT device, needs to be sent, there is no need to establish data radio bearers. The information can be sent as part of signalling message. A similar approach is available in case of 4G LTE. 

Quoting from Ofinno whitepaper 'Small Data Transmission: PHY/MAC', 

The SDT in the 3GPP simply refers to data transmission in an inactive state. Specifically, the SDT is a transmission for a short data burst in a connectionless state where a device does not need to establish and teardown connections when small amounts of data need to be sent.

In the 3GPP standards, the inactive state had not supported data transmission until Release 15. The 3GPP standards basically allowed the data transmission when ciphering and integrity protection are achieved during the connection establishment procedure. Therefore, the data transmission can occur after the successful completion of the establishment procedure between the device and network.

The problem arises as a device stays in the connected state for a short period of time and subsequently releases the connection once the small size data is sent. Generally, the device needs to perform multiple transmissions and receptions of control signals to initiate and maintain the connection with a network. As a payload size of the data is relatively smaller compared with the amounts of the control signals, making a connection for the small data transmission becomes more of a concern for both the network and the device due to the control signaling overhead.

The 3GPP has developed the SDT procedure to enable data transmission in the inactive state over the existing LTE and NR standards. The device initiates the SDT procedure by transmitting an RRC request message (e.g., SDT request message) and data in parallel instead of transmitting the data after the RRC request message processed by a network. Additional transmission and/or reception are optional. The device performs this SDT procedure without transition to the connected state (i.e., without making a connection to the network).

The SDT enables for the network to accept data transmission without signaling intensive bearer establishment and authentication procedure required for the RRC connection establishment or resume procedure. For example, in the SDT procedure, the device needs only one immediate transmission of a transport block (TB) that contains data and RRC request message. Furthermore, the device does not need to perform procedures (e.g., radio link monitoring) defined in the connected state since the RRC state is kept as the inactive state. This results in improving the battery life of the device by avoiding control signaling unnecessary for transmission of small size data.

The principle of the SDT is very simple. The network configures radio resources beforehand for the data transmission in the inactive state. For example, if the conditions to use the configured radio resources satisfy, the device transmits data and the RRC request message together via the configured radio resources. In the 3GPP standards, there are two types of the SDT depending on the ways to configure the radio resources: (1) SDT using a random access (RA) and (2) SDT using preconfigured radio resources. 

Figure 2 (top) illustrates different types of the SDT referred in 3GPP LTE and NR standards. The SDT using the random access in LTE and NR standards is referred to as an EDT (early data transmission) and RA-SDT (Random Access based SDT), respectively. For both the EDT and the RA-SDT, the device performs data transmission using shared radio resources of the random access procedure. Thus, the contention with other devices can occur over the access to the shared radio resources. The shared radio resources for the SDT are broadcast by system information and are configured as isolated from the one for a nonSDT RA procedure, i.e., the legacy RA procedure. On the other hands, the CG-SDT uses the preconfigured radio resources dedicated to the device. The SDT using the preconfigured radio resource is referred to as transmission via PUR (Preconfigured Uplink Resource) in the LTE standards. The NR standards refers the SDT using the preconfigured radio resource as CG-SDT (Configured Grant based SDT). The network configures the configuration parameters of the preconfigured radio resources when transiting the device in the connected state to the inactive state. For example, an RRC release message transmitted from the network for a connection release contains the configuration parameters of PUR or CG-SDT. No contention is expected for the SDT using the preconfigured radio resource since the configuration parameters are dedicated to the device. 

You can continue reading the details in whitepaper here. Ofinno has another whitepaper on this topic, 'Small Data Transmission (SDT): Protocol Aspects' here.

3GPP also recently published an article on this topic here. Quoting from the article:

With SDT it is possible for the device to send small amounts of data while remaining in the inactive state. Note that this idea resembles the early GSM systems where SMS messages where sent via the control signalling; that is, transferring small amounts of data while the mobile did not have a (voice) connection.

SDT is a procedure which allows data and/or signalling transmission while the device remains in inactive state without transitioning to connected state. SDT is enabled on a radio bearer basis and is initiated by the UE only if less than a configured amount of UL data awaits transmission across all radio bearers for which SDT is enabled. Otherwise the normal data transmission scheme is used.

With SDT the data is transmitted quickly on the allocated resource. The IoT device initiates the SDT procedure by transmitting an RRC request message and payload data in parallel, instead of the usual procedure where the data is transmitted after the RRC request message is processed by a network.

It is not only the speed and the reduced size of the transmitted data which make SDT such a suitable process for IoT devices. Since the device stays in the inactive state, it does not have to perform many tasks associated with the active state. This further improves the battery life of the IoT device. Additional transmission and/or reception are optional.

There are two ways of performing SDT:

1. via random access (RA-SDT)
2. via preconfigured radio resources (CG-SDT)

Random Access SDT

With RA-SDT, the IoT device does not have a dedicated radio resource, and it is possible that the random access message clashes with similar RA-SDT random access messages from other IoT devices. The device gets to know the radio resources for the RA procedure from system information messages, in a similar way to non RA-SDT devices. However, the RA radio resources for SDT and non SDT devices are kept separate; that is, these device types do not interfere with each other in random access

The RA-SDT procedure can be a two-step or a four-step random access procedure. In two-step procedure the payload data is already sent with the initial random access message, whereas in four-step procedure the device first performs contention resolution with the random access request - random access response message pair, and then sends the UL payload with RRC Resume Request. The procedure may continue with further uplink and downlink small data transmissions, and then it is terminated with an RRC Release from the network.

Below are the signalling diagrams for both two-step and four-step RA-SDT procedures. Note that in both cases the UE stays in the RRC inactive state during the whole process.

Configured Grant SDT

For CG-SDT, the radio resources are allocated periodically based on the estimation of the UE’s traffic requirements. This uplink scheduling method is called Configured Grant (CG). With CG-SDT there will be no message clashes with other IoT devices since the radio resources are dedicated for each device. The resource allocation is signalled to the IoT device by the network when the device leaves the connected state.

If the amount of data in the UE's tx buffer is larger than a defined limit, then the data transmission is done using the normal non-SDT procedure.

For SDT process, the device selects the CG-SDT as the SDT type if the resources for the CG-SDT are configured on the selected uplink carrier. If the resources for the CG-SDT are unavailable or invalid, the RA-SDT or the non-SDT RA procedure will be chosen if those are configured. If no SDT type configuration is available then a normal non-SDT data transmission is performed.

With IoT devices proliferating, it makes sense to optimise data transfer and anything else that will reduce the power consumption and let the battery in the devices last for much longer.

Related Posts: 

• The 3G4G Blog: 3GPP Release 17 Description and Summary of Work Items
• The 3G4G Blog: A Technical Introduction to 5G NR RRC Inactive State
• The 3G4G Blog: Mobile Initiated Connection Only (MICO) mode in 5G System
• The 3G4G Blog: Four Ways 5G Can Improve the Battery Life of User Equipment (UE)
• The 3G4G Blog: Energy Consumption in Mobile Networks and RAN Power Saving Schemes
• The 3G4G Blog: Reducing 5G Device Power Consumption Using Connected-mode Discontinuous Reception (C-DRX)
• The 3G4G Blog: Are there 50 Billion IoT Devices yet?
• The 3G4G Blog: 5G Non IP Data Delivery and Lightweight M2M (LwM2M) over NIDD
• The 3G4G Blog: Introduction to 5G Reduced Capability (RedCap) Devices
• The 3G4G Blog: Embedded SIM (eSIM) and Integrated SIM (iSIM)
• Connectivity Technology Blog: Is LTE Cat 1bis Uniting the Fragmented Cellular IoT Market? 

3GPP TSG RAN and TSG SA Release-19 Workshop Summary

3GPP recently announced the milestone of reaching 100th plenaries of the three Technical Specification Groups (TSGs) in 3GPP which took place in Taipei last week. If you are unsure what TSGs are, we recently made a tutorial of 3GPP, available here.

During the plenary TSG SA and TSG RAN held workshops on Release 19. The top level link for RAN workshop is here while that for SA is here. SA also has HTML link of the documents here.

The slide above is from the RAN chair's summary provides list of topics that were discussed. The following is the executive summary from the draft workshop report:

The 3GPP TSG RAN Rel-19 face-to-face workshop was held June 15 - June 16, 2023 in Taipei hosted by TAICS (Taiwan Association of Information and Communication Standards) and MediaTek with 174 participants (see Annex A) and 491 Tdocs (see Annex B). A GotoWebinar conference call was carried out during the whole workshop to display discussed documents and to allow listen & talk access for people joining remotely.

The workshop agenda was provided in RWS-230001 and split into 3 main parts:

• High-level overview proposals for Rel-19: 18 Tdocs handled, 46 not treated, 1 in the end endorsed (RP-230488)
• Specific RAN1/2/3-led Rel-19 topics: 29 Tdocs handled, 369 not treated
• RAN4-led Rel-19 topics (for information only): 20 not treated

Note: High-level overview proposals for Rel-19 and RAN4-led Rel-19 topics had the restriction of maximum one contribution led per company.

Some guidance about the workshop was provided on the RAN email reflector on 28.04.23 and 02.05.23.

Time plan versions of the workshop were provided on 02.05.23, 11.06.23 and on 15.06.23.

Workshop inputs were possible from 28.04.23 until the submission deadline 31.05.23 9pm UTC.

(Late Tdoc requests as well as revisions of Tdocs after the Tdoc request deadline 30.05.23 9pm UTC were avoided in order to not complicate the Tdoc handling, like quotas for AI 4 and 6, preparations of the workshop in parallel to RAN #100 and preparations of the summary etc.)

Originally, Thursday 15.06.23 and Friday 16.06.23 morning were planned for presentations of a limited set of 47 workshop contributions (selected by the RAN chair trying to achieve a fair coverage of the topics and interests and taking into account that there were many more inputs that can be handled in a 2 days workshop) and Friday afternoon was reserved for the discussion of a summary of the RAN chair (in RWS-230488). Note: Since the presentation part went faster and the Friday lunch break was skipped, the workshop ended on Friday afternoon earlier than originally planned.

Finally, the RAN chair's summary in RWS-230488 was endorsed indicating the motivations and handling of the workshop, the Rel-19 timeline and load plans and the management and categorization of topics.

TSG SA didn't have a summary slide but SWS-230002, output of drafting session on Consolidated SA WG2 Rel-19 Work, listed the following topics:

• Satellite Architecure Enhancements
• XRM Enhancements and Metaverse
• AI/ML enhancements
• Multi-access (Dual 3GPP + ATSSS Enh)
• Integrated Sensing and Communication
• Ambient IoT
• Energy Efficiency / Energy Saving as a Service
• IMS and NG_RTC enhancements
• Edge Computing Enhancements
• Proximity Services enhancements 
• TSC/URLLC/TRS enhancements 
• Network Sharing 
• User identities + identification of device behind RG/AP
• 5G Femto 
• UAS enhancements 
• VMR Enhancements 
• UPEAS Enhancements 

3GPP Rel-19 candidates by Nokia#Free5Gtraining #3G4G5G #Nokia #5G #5GAdvanced #5GNetworks #3GPP #Release19 #NTN #Sidelink #Femto #WUS #IoT #Sidelink #Positioning #XR #AIML #MIMO #Beamforming #Enhancements #AIML #Duplex #Slicing #EnergyEfficiency pic.twitter.com/t1ehBYgCVM

— Free 5G Training (@5Gtraining) June 12, 2023

Fattesinh Deshmukh has a summary of 3GPP RAN Rel-19 Workshop on LinkedIn here. Nokia has their summary of the workshop here.

Related Posts: 

• 3G4G: A Quick Introduction to 3GPP
• The 3G4G Blog: 3GPP's 5G-Advanced Workshop Summary
• The 3G4G Blog: ATIS Webinar on "3GPP Release 18 Overview: A World of 5G-Advanced"
• The 3G4G Blog: '5G RAN Release 18 for Industry Verticals' Webinar Highlights 

New 5G NTN Spectrum Bands in FR1 and FR2

Release-17 includes two new FR1 bands for NTN; n255 (a.k.a. NTN 1.6GHz) and n256 (a.k.a. NTN 2GHz). The picture is from a slide in Rohde & Schwarz presentation available here. Quoting from an article by Reiner Stuhlfauth, Technology Manager Wireless, Rohde & Schwarz:

Currently, several frequency ranges are being discussed within 3GPP for NTN. Some are in the FR1 legacy spectrum, and some beyond 10 GHz and FR2. The current FR1 bands discussed for NTN are:

• The S-band frequencies from 1980 to 2010 MHz in uplink (UL) direction and from 2170 to 2200 MHz in downlink (DL) direction (Band n256).
• The L-band frequencies from 1525 to 1559 MHz DL together with 1626.5 to 1660.5 MHz for the UL (Band n255).1

These frequency ranges have lower path attenuation, and they’re already used in legacy communications. Thus, components are available now, but the bands are very crowded, and the usable bandwidth is restricted. Current maximum bandwidth is 20 MHz with up to 40-MHz overall bandwidth envisaged in the future [TR 38.811].

As far as long-term NTN spectrum use is concerned, 3GPP is discussing NR-NTN above 10 GHz. The Ka-band is the highest-priority band with uplinks between 17.7 and 20.2 GHz and downlinks between 27.5 and 30 GHz, based on ITU information regarding satellite communications frequency use.2 Among current FR2 challenges, one is that some of the discussed bands fall into the spectrum gap between FR1 and FR2 and that NTN frequencies will use FDD duplex mode due to the long roundtrip time.

6G Unified networks: Multi-Layer Multi-Dimension Multi-Band (ML-MD-MB) Topology via @RohdeSchwarz highlights the future 6G Satellite and Terrestrial Network Convergence Vision#3G4G5G #5G #B5G #6G #NTN pic.twitter.com/DHVIP9kw8J

— Zahid Ghadialy (@zahidtg) May 20, 2023

Worth highlighting again that the bands above, including n510, n511 and n512 are all FDD bands due to the long round trip times.

The latest issue of 3GPP highlight magazine has an article on NTN as well. Quoting from the article:

The NTN standard completed as part of 3GPP Release 17 defines key enhancements to support satellite networks for two types of radio protocols/interfaces:

• 5G NR radio interface family also known as NR-NTN
• 4G NB-IoT & eMTC radio interfaces family known as IoT-NTN

These critical enhancements including adaptation for satellite latency and doppler effects have been carefully defined to support a wide range of satellite network deployment scenarios and orbits (i.e., LEO, MEO and GEO), terminal types (handheld, IoT, vehicle mounted), frequency bands, beam types (Earth fixed/Earth moving) and sizes. The NTN standard also addresses mobility procedures across both terrestrial and non-terrestrial network components. Release 17 further includes Radio Frequency and Radio Resource Management specifications for terminals and satellite access nodes operating in two FR1 frequency ranges allocated to Mobile Satellite Services (i.e., n255 and n256).

You can read it here.

Related Posts: 

• The 3G4G Blog: 3GPP 5G Non Terrestrial Networks (NTN) Standardization Update
• Connectivity Technology Blog: 5G NR-NTN Demos make a Debut at MWC 2023
• Connectivity Technology Blog: Direct-to-Mobile Communications Using LEO Satellites gets a Step Closer
• Connectivity Technology Blog: TIP has launched 'Non-Terrestrial Connectivity Solutions' Group
• The 3G4G Blog: An Introduction to Non-Terrestrial Networks (NTN)
• Free 6G Training: Non-Terrestrial Networks (NTN) & Satellites - Taking 6G to the Stars
• The 3G4G Blog: How Many People are Still Unconnected in 2023 and Why? 

Top 10 New (2022) Security Standards That You Need to Know About!

I had been meaning to add this session to the blog for a while. Some security researchers may find these useful. 

At RSA Conference 2022, Bret Jordan, CTO, Emerging Technologies, Broadcom and Kirsty Paine, Advisor - Technology & Innovation, EMEA, Splunk Inc. presented a talk covering what they described as the most important, interesting and impactful technical standards, hot off the press and so 2022. From the internet and all its things, to the latest cybersecurity defenses, including 5G updates and more acronyms than one can shake a stick at. 

"10 Security Standards in 2022 You Can't Live Without". Great #RSAC2022 presentation by @symantec Broadcom Software's @jordan_bret and @Splunk's Kirsty Paine. Download the slides here: https://t.co/aEqqnQvicM pic.twitter.com/CiIhDH7tu6

— Patrick Donegan (@HardenStance) July 13, 2022

The video is embedded below and the slides are available here.

Related Posts: 

• The 3G4G Blog: Authentication and Key Management for Applications (AKMA) based on 3GPP credentials in the 5G System (5GS)
• The 3G4G Blog: 5G and Cyber Security
• The 3G4G Blog: Lawful Intelligence and Interception in 5G World with Data and OTT Apps
• The 3G4G Blog: Realizing Zero Trust Architecture for 5G Networks
• The 3G4G Blog: Bug hunting in 5G Networks and Devices
• The 3G4G Blog: AT&T Cybersecurity Experts Provide 5G Security Overview
• The 3G4G Blog: Everything you need to know about 5G Security
• The 3G4G Blog: Key Technology Aspects of 5G Security by Rohde & Schwarz
• The 3G4G Blog: 5G Roaming with SEPP (Security Edge Protection Proxy) 

Qualcomm Webinar on 'Realizing mission-critical industrial automation with 5G'

Private 5G networks have immense potential to transform industries by improving flexibility within the shop floor of the industries. Industrial 5G networks hold the promise to transform mission-critical industrial automation by using the built-in 5G features of higher bandwidth, lower latency, greater reliability, and improved security.

Some of the ways in which Industrial 5G (I5G) networks will help transform mission-critical industrial networks using automation include:

• Enhanced Communication: I5G networks will offer faster and more reliable communication between machines, sensors, and other devices. This will lead to better synchronization, increased efficiency, and reduced downtime in industrial processes.
• High-Quality Video: I5G networks will provide high-quality video streaming, enabling real-time monitoring of industrial processes. This will be particularly useful in applications such as remote inspections, quality control, and process optimization.
• Edge Computing: I5G networks will support edge computing, that will enable processing of data close to where it is generated. This will help to keep latency to a minimum thereby improve response times and making it possible to perform critical tasks in real-time.
• Improved Security: I5G networks will provide improved security features along with network slicing, which will enable the creation of secure virtual networks for specific applications or users. This will in-turn help to protect against cyberattacks and ensure the integrity of data.
• Reduced Downtime: I5G networks will help to reduce downtime by providing real-time monitoring and predictive maintenance capabilities. This will allow identification of potential problems before they cause downtime thereby enabling proactive maintenance and repairs.

Overall, I5G networks have the potential and the capability to significantly improve mission-critical industrial automation by providing faster, more reliable, and secure communication, enabling real-time monitoring and control, and reducing downtime through predictive maintenance capabilities.

In addition, Private/Industrial 5G will help with Time-Sensitive Networking (TSN) by providing a highly reliable and low-latency wireless communication network that can support real-time industrial control and automation applications. TSN is a set of IEEE standards that enable time-critical data to be transmitted over Ethernet networks with very low latency and high reliability.

I5G networks provide a wireless alternative to wired Ethernet networks for TSN applications, which can be advantageous in environments where deploying Ethernet cabling is difficult or costly. With I5G, TSN traffic can be prioritized and transmitted over the network with low latency and high reliability, which is critical for industrial automation and control applications that require precise timing and synchronization.

Moreover, I5G networks can be deployed with network slicing capabilities, allowing for the creation of multiple virtual networks with different performance characteristics tailored to specific applications or user groups. This means that TSN traffic can be isolated and prioritized over other types of traffic, ensuring that critical data is always transmitted with the highest priority and reliability.

Last year, Qualcomm hosted a webinar on 'Realizing mission-critical industrial automation with 5G'. The webinar is embedded below:

Here is the summary of what the webinar includes:

Manufacturers seeking better operational efficiencies, with reduced downtime and higher yield, are at the leading edge of the Industry 4.0 transformation. With mobile system components and reliable wireless connectivity between them, flexible manufacturing systems can be reconfigured quickly for new tasks, to troubleshoot issues, or in response to shifts in supply and demand. 

5G connectivity enables flexibility in demanding industrial environments with key capabilities such as ultra-reliable wireless connectivity, wireless Ethernet, time-sensitive networking (TSN), and positioning. There is a long history of R&D collaboration between Bosch Rexroth and Qualcomm Technologies for the effective application of these 5G capabilities to industrial automation use cases. At the Robert Bosch Elektronik GmbH factory in Salzgitter, Germany, this collaboration has reached new heights by demonstrating time-synchronized control of an industrial robot, and remote positioning of an automated guided vehicle (AGV) over a live, ultra-reliable 5G private network.

Watch the session to learn how:

• Qualcomm Technologies and Bosch Rexroth are collaborating to accelerate the Industry 4.0 transformation
• 5G technologies deliver key capabilities for mission-critical industrial automation
• Distributed control solutions can work effectively across 5G TSN networks
• A single 5G technology platform solves connectivity and positioning needs for flexible manufacturing

The video is also available on Qualcomm site here and the slides are here.

A shorter video looking behind the tech to see how Qualcomm and Bosch are partnering to enable mission-critical industrial automation over a 5G private network is as follows:

Related Posts: 

• The 3G4G Blog: 5G and Industry 4.0
• The 3G4G Blog: 3GPP Release-17 5G NR Reaches Completion
• The 3G4G Blog: What Is the Role of AI and ML in the Open RAN and 5G Future?
• The 3G4G Blog: 3GPP Release-18 Work Moves Into Focus as Release-17 Reaches Maturity
• The 3G4G Blog: '5G RAN Release 18 for Industry Verticals' Webinar Highlights
• The 3G4G Blog: Challenges and Future Perspectives of Industrial 5G
• Free 6G Training: Qualcomm Pushing the boundaries of AI research 

ETSI's Summit on Sustainability: ICT Standards for a Greener World

The ETSI Summit on Sustainability - How ICT developments and standards can enable sustainability and have a positive impact on society, took place on 30 March 2023 and focused on the key role of the ICT industry and related standardization activities to support Green initiatives. The event brought a large and global audience of over 220 stakeholders including operators, solution providers, policy makers and standards bodies or fora working on the topic.

A multitude of presentations including two interactive panel sessions, rhythmed the day and succeeded to make it a highly interactive Summit, pointing out challenges and how ICT can be both the problem and the solution.

The opening session examined the sustainability challenges and global green initiatives from numerous global standards bodies and fora. One of the suggested actions was to adopt ESG (Environmental Social Governance) goals as an integral part of the company’s objectives. Another highlight from the session was the need for standards work on the measuring and reporting of “avoided emissions,” that is being covered by ongoing work in ETSI. Feedback from the audience pointed out that it would be beneficial to further investigate the balance of ICT deployments vs real needs. Do we really need to endlessly deploy new technologies, when exiting ones serve the need?

The following are presentations from the welcome address and session 1:

• Welcome Address by Luis Jorge Romero, Director General, ETSI
• SESSION 01 - The Sustainability Challenge and Global Green Initiatives chaired by Bettina Funk, ETSI GA Chair: The session examines several regional and global initiatives working on sustainability and seeks to identify synergies and areas of cooperation.
• Some Standardization Needs for Green Digital Twin Transition by Emilio Davila Gonzalez, European Commission
• ITU Sustainability & Working with ETSI by Dominique Wurges, ITU-T SG5  
• IEC Sustainability & Working with ETSI by Alfonso Sturchio, IEC TC111 
• ISO/IEC/JTC1 Sustainability & Working with ETSI by Thomas Wegmann, Liaison officer ISO/IEC JTC 1/SC 39
• The work of GeSI toward Energy Efficiency (and other sustainable technologies) by Luis Neves, GeSi
• Green Future Networks by Anita Doehler, NGMN Alliance

The second session focused on the role of ICT in sustainability and was animated by two panels. The first one addressed the operators’ objectives and their plans for sustainability. The second one dealt with various initiatives being taken by solutions providers to meet the needs expressed by the operators and society as a whole. Suggested actions emerging from the debate included putting sustainability criteria in the procurement phase towards the vendors and enhance collaboration between operators, to share their common requirements and provide them to the supply chain ecosystem. In an animated exchange between the Panellists and the audience it was highlighted that there is an urgent need to reduce energy consumption, extend the lifecycles of ICT equipment and systematically recycle and repurpose in order to reduce ICT waste.

The following are presentations from session 2:

• Session 02 - The Role of ICT in Sustainability: The session comprises two interactive panel sessions examining 1) Operators objectives and plans for Sustainability and 2) several initiatives being taken by solutions providers to meet those objectives. Session Chaired by David Boswarthick, ETSI
• Operators Panel Moderated by Anita Dohler, NGMN Alliance e.V.: The purpose of this panel is to examine what are the sustainability plans, challenges & priorities for Operators
• Saima Ansari, Deutsche Telekom
• P. Balaji, Vodafone Idea
• Marc Grant, AT&T
• Luca Pesando, TIM
• Solution Providers Panel Moderated by Joe Barrett, GSA, Global Mobile Suppliers Association - The purpose is to examine what the current solutions and remaining challenges on Sustainability are.
• Howard Benn, Samsung
• Raffaele Bolla, 6Green Project
• Ralf Bucksch, IBM
• Susanna Kallio, Nokia

The afternoon opened with an  overview of ETSI, 3GPP and oneM2M activities supporting technologies for sustainability. One of the presentations highlighted that ICT should initially focus its own environmental impacts and consider digital sobriety as it is recognized that the cleanest energy is the one that is not consumed.

The following are presentations from session 3:

• Session 03 - ETSI Activities Supporting Technologies for Sustainability Chaired by Nick Sampson, ETSI OCG Chair: This session will present the sustainability standards work that is ongoing in ETSI and our Partnership Projects oneM2M and 3GPP.
• TC EE’s Approach to Sustainability by Benjamino Gorini, TC EE Chair 
• The Work of TC ATTM and OEU for Green and Sustainable Networks and Cities by Lynn Reiner. TC ATTM TM6 Chair
• 3GPP’s Approach to Energy Efficiency by Jean-Michel Cornily, Rapporteur for 3GPP EE work items
• oneM2M Work on IoT for Sustainability by Dale Seed, Chair oneM2M SSC 

The summit concluded with a dynamic exchange around what more telecoms can do to move forward in the right direction. ICT and specifically data centres create a significant carbon footprint, and there was a call to use the ISO Net Zero guidelines in order to develop sustainable strategies. The industry should adopt an eco-design (sustainability by design) approach and seek to have products that are energy efficient, with longer life cycles, recyclable and repairable.

The following are presentations from session 4:

• Session 04 - What More Can Telecoms Do to Ensure Global Sustainability Targets are Reached? Chaired by Dirk Weiler, ETSI Board Chair: This session will address alternative perspectives on the principle challenges and gaps that need to be urgently addressed. What more can be done, both in ETSI and beyond, and what could be future directions/actions for the industry?
• Environmental Impact of ICT – Data Centers by Bruno Lafitte, ADEME
• ISO Net Zero Guidelines – a Global Basis for Net Zero Action by Emily Faint, BSI
• ECOS: Driving Environmentally Friendly Standards, Policies and Laws by Mathieu Rama, ECOS

As a conclusion it was agreed that ICT is part of the sustainability problem and must seek to reduce its own emissions, whilst at the same time ICT is certainly part of the solution and should be applied to other domains in order to help them reach their own sustainability goals. As a first step, making ICT more sustainable should be the #01 priority for the industry today and ETSI groups TC EE (environmental engineering), TC ATTM (access, terminal and multiplexing) and ISG OEU (operational energy efficiency for users) are currently providing the standards to enable this transition to greener digital technologies.

Event Wrap-Up / Conclusions is available here.

Should you wish to learn more about the summit, all of the presentations including the conclusion slides are available here.

Related Posts: 

• The 3G4G Blog: Energy Consumption in Mobile Networks and RAN Power Saving Schemes
• Free 6G Training: Technology Enablers for Spectrum & Energy Efficient 6G Wireless Access
• The 3G4G Blog: Reducing 5G Device Power Consumption Using Connected-mode Discontinuous Reception (C-DRX)
• Free 6G Training: Sustainability as an Integral Part of 6G System Architecture Design
• Free 6G Training: 6G Flagship Webinar on 'Green Networking in B5G'
• Free 6G Training: AT&T Wants a Sustainable and Affordable 6G 

An Introduction to Multi-access Edge Computing (MEC) in 5G

We have covered some detailed webinars and presentations on MEC (Multi-access Edge Computing) but people have often asked us to add some basic tutorial on this topic. Wray Castle hosted a webinar last year on this topic. The abstract of that says: 

MEC extends the NFV concept to deploy the virtualization resources at the network edge rather than in the core/public network. MEC thus provides a significant opportunity to offer hosting for a range of novel applications, including those deployed by third parties, but it introduces new challenges in terms of the capabilities needed, and need to deploy applications onto the right edge systems for these benefits to be realised. This webinar explores these topics and presents an overview of the ETSI standardised architecture for MEC.

The webinar video is embedded below:

Related Posts: 

• The 3G4G Blog: 3GPP Standards on Edge Computing
• The 3G4G Blog: Edge Computing - Industry Vertical Viewpoints
• The 3G4G Blog: Transitioning from Cloud-native to Edge-Native Infrastructure
• The 3G4G Blog: Edge Computing Tutorial from Transforma Insights
• The 3G4G Blog - Webinar: Where Edge Meets Cloud by Dean Bubley
• Telecoms Infrastructure Blog: SK Telecom’s 5G MEC Status and Plan
• Operator Watch Blog: How is KT Reducing the Latency of their 5G Network 

How many Cell Sites and Base Stations Worldwide?

I wrote a blog post on this topic nearly three years back on the Operator Watch Blog here. That post is very handy as every few months someone or other asks me about this number. Here is a slightly updated number, though I am not confident on its accuracy. 

Gabriel Brown, analyst at Heavy Reading shares this chart above in the annual online Open RAN Digital Symposium. Based on the chart above, there are 7 million physical sites and 10 million logical sites. As there are many sites hosting infrastructure from multiple operators, the number of logical sites are more than the number of physical sites.

Again, most of the sites have distributed RAN (D-RAN) so there may be one or more base stations (baseband unit or BBU) and each base station can serve one or more radios. See links at the bottom for tutorials on these topics.

Per MIIT, new China 5G BTS shipments to drop by a third in 2023 relative to 2022 shipments. https://t.co/6iCMCh0ht6

— Stefan Pongratz (@StefanPongratz) March 9, 2023

China Tower had nearly 2.1 million telecom towers installed with 3.36m tower tenants at end of 2022. An MIIT minister said that China's operators will deploy 600k 5G base stations in 2023, taking total to 2.9m.

Astonishing scale of investment and execution in #China for #5G, creating a pervasive connectivity fabric that is driving massive digital transformation. 1.4 million base stations for 5G alone!!! For perspective, that nearly 3x India's total base station count...@mandalainsights https://t.co/9djZiiy67t

— Shiv Putcha (@shivputcha) January 21, 2022

The number of 5G radios in India just crossed 100,000 according to latest data released by the Department of Telecommunications. A base station generally manages multiple radios so not sure how many base stations would be there for 5G and even for older Gs.

In South Korea, according to the Ministry of Science and ICT and the mobile communication industry, as of December 2021, had 460,000 5G wireless stations of which, base stations accounted for 94% of the total, or 430,000 units, while repeaters only accounted for 30,000 units, or 6%.

Light Reading reported in September 2022 that there are nearly 419,000 cell sites across the US, according to the newest figures from CTIA. 

China and USA are roughly the same size so you can see how China is ensuring their mobile networks provide the best QoE. It should also be noted that the population of China is over four times that of the USA. On the other hand, India and China have the same population but India is one third the size of China roughly.

Related Posts:

• Operator Watch Blog: How many 5G Cell Towers & Base Stations Worldwide?
• The 3G4G Blog: Different Types of RAN Architectures - Distributed, Centralized & Cloud
• The 3G4G Blog: Open RAN Terminology and Players