Showing posts with label Deployment. Show all posts
Showing posts with label Deployment. Show all posts

Friday 15 June 2012

Three Phases of WiFi Integration


From a presentation by Ericsson in the LTE World Summit 2012. Presentation available here.

Operator WiFi is becoming an important proposition and there are advantages and disadvantages of both of them. The above picture summarises the phases in which it may take place.

See also:

Saturday 19 May 2012

Backhauling the Telefonica O2 London LTE Trial

Interesting Video and Presentation about backhaul in the London Trial of LTE deployment by O2.


Presentation:
We have an event in October in Cambridge Wireless that will look at the backhaul and deployments a bit more in detail. Details here.

Monday 9 April 2012

Radio relay technologies in LTE-Advanced

The following is from NTT Docomo Technical journal

Three types of radio relay technologies and their respective advantages and disadvantages are shown in Figure 1. 
A layer 1 relay consists of relay technology called a booster or repeater. This is an Amplifier and Forward (AF) type of relay  technology by which Radio Frequency (RF) signals received on the downlink from the base station are amplified and transmitted to the mobile station. In a similar manner, RF signals received on the uplink from the mobile station are amplified and transmitted to the base station. The equipment functions of a layer 1 relay are relatively simple, which makes for low-cost implementation and short processing delays associated with relaying. With these  features, the layer 1 relay has already found widespread use in 2G and 3G mobile communication systems. It is being deployed with the aim of improving coverage in mountainous regions, sparsely populated areas and urban areas as well as in indoor environments.


The RF performance specifications for repeaters have already been specified in LTE, and deployment of these repeaters for the same purpose is expected. The layer 1 relay, however, amplifies intercell interference and noise together with desired signal components thereby deteriorating the received Signal to Interference plus Noise power Ratio (SINR) and reducing the throughput enhancement gain.


The layer 2 relay, meanwhile, is a Decode and Forward (DF) type of relay technology by which RF signals received on the downlink from the base station are demodulated and decoded and then encoded and modulated again before being sent on to the mobile station. This demodulation and decoding processing performed at the radio relay station overcomes the drawback in layer 1 relays of deteriorated received SINR caused by amplification of intercell interference and noise. A better throughput-enhancement effect can therefore be expected compared with the layer 1 relay. At the same time, the layer 2 relay causes a delay associated with modulation/demodulation and encoding/decoding processing. In this type of relay, moreover, radio functions other than modulation/demodulation and encoding/decoding (such as mobility control, retransmission control by Automatic Repeat request (ARQ), and user-data concatenation/segmentation/reassembly) are performed between the base station and mobile station transparently with respect to the radio relay, which means that new radio-control functions for supporting this relay technology are needed. 




The layer 3 relay also performs demodulation and decoding of RF signals received on the downlink from the base station, but then goes on to perform processing (such as ciphering and user-data concatenation/segmentation/reassembly) for retransmitting user data on a radio interface and finally performs encoding/modulation and transmission to the mobile station. Similar to the layer 2 relay, the layer 3 relay can improve throughput by eliminating inter-cell interference and noise, and additionally, by incorporating the same functions as a base station, it can have small impact on the standard specifications for radio relay technology and on implementation. Its drawback, however, is the delay caused by user-data processing in addition to the delay caused by modulation/demodulation and encoding/decoding processing.


In 3GPP, it has been agreed to standardize specifications for layer 3 relay technology in LTE Rel. 10 because of the above features of improved received SINR due to noise elimination, ease of coordinating standard specifications, and ease of implementing the technology. Standardization of this technology is now moving forward.


Layer 3 radio relay technology is shown in Figure 2. In addition to performing user-data regeneration processing and modulation/demodulation and encoding/ decoding processing as described above, the layer 3 relay station also features a unique Physical Cell ID (PCI) on the physical layer different than that of the base station. In this way, a mobile station can recognize that a cell provided by a relay station differs from a cell provided by a base station.


In addition, as physical layer control signals such as Channel Quality Indicator (CQI) and Hybrid ARQ (HARQ) can terminate at a relay station, a relay station is recognized as a base station from the viewpoint of a mobile station. It is therefore possible for a mobile station having only LTE functions (for example, a mobile station conforming to LTE Rel. 8 specifications) to connect to a relay station. Here, the wireless backhaul link (Un) between the base station and relay station and the radio access link (Uu) between the relay station and mobile station may operate on different frequencies or on the same frequency. In the latter case, if transmit and receive processing are performed simultaneously at the relay station, transmit signals will cause interference with the relay station’s receiver by coupling as long as sufficient isolation is not provided between the transmit and receive circuits. Thus, when operating on the same frequency, the wireless backhaul-link and radio-access-link radio resources should be subjected to Time Division Multiplexing (TDM) so that transmission and reception in the relay station are not performed simultaneously.




Scenarios in which the introduction of relay technology is potentially useful have been discussed in 3GPP. Deployment scenarios are shown in Table 1. Extending the coverage area to mountainous and sparsely populated regions (rural area and wireless backhaul scenarios) is an important scenario to operators. It is expected that relay technology can be used to economically extend coverage to such areas as opposed to deploying fixed-line backhaul links. Relay technology should also be effective for providing temporary coverage when earthquakes or other disasters strike or when major events are being held (emergency or temporary coverage scenario), i.e., for situations in which the deployment of dedicated fixed-line backhaul links is difficult. In addition, while pico base stations and femtocells can be used for urban hot spot, dead spot, and indoor hot spot scenarios, the installation of utility poles, laying of cables inside buildings, etc. can be difficult in some countries and regions, which means that the application of relay technology can also be effective for urban scenarios. Finally, the group mobility scenario in which relay stations are installed on vehicles like trains and buses to reduce the volume of control signals from moving mobile stations is also being proposed.


In 3GPP, it has been agreed to standardize the relay technology deployed for coverage extension in LTE Rel. 10. These specifications will, in particular, support one-hop relay technology in which the position of the relay station is fixed and the radio access link between the base station and mobile station is relayed by one relay station.



References
[1] 3GPP TS36.912 V9.1.0: “Feasibility study for Further Advancement for E-UTRA (LTE-Advanced),” 2010.
[2] 3GPP TS36.323 V9.0.0: “Evolved Universal Terrestrial Radio Access (E-UTRA); Packet Data Convergence Protocol (PDCP) specification,” 2009
[3] 3GPP TS36.322 V9.1.0: “Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Link Control (RLC) protocol specification,” 2010.
[4] 3GPP TS36.321 V9.2.0: “Evolved Universal Terrestrial Radio Access (E-UTRA); Medium Access Control (MAC) protocol specification,” 2010.
[5] 3GPP TS36.331 V9.2.0: “Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol specification,” 2010.
[6] 3GPP TS36.413 V9.2.1: “Evolved Universal Terrestrial Radio Access (E-UTRA); S1 Application Protocol (S1AP),” 2010.
[7] 3GPP TR36.806 V9.0.0: “Evolved Universal Terrestrial Radio Access (E-UTRA); Relay architectures for E-UTRA (LTEAdvanced),” 2010.
[8] IETF RFC4960: “Stream Control Transmission Protocol,” 2007.
[9] 3GPP TS29.281 V9.2.0: “General Packet Radio System (GPRS) Tunnelling Protocol User Plane (GTPv1-U),” 2010.


Monday 12 September 2011

LTE Rollouts and Deployment Scenarios

According to GSA report, as of August 2011, 26 commercial LTE networks in 18 countries are already rolled out as below:
As of Aug. 2011, 237 operators in 85 countries are investing in LTE:

* 174 LTE network commitments in 64 countries
* 63 pre-commitment trials in 21 more countries
* 26 commercial LTE networks launched
* At least 93 LTE networks are expected to be in commercial service by end 2012

The following is from the 4G Americas whitepaper:

There are many different scenarios that operators will use to migrate from their current networks to future technologies such as LTE. Figure 10 presents various scenarios including operators who today are using CDMA2000, UMTS, GSM and WiMAX. For example, as shown in the first bar, a CMDA2000 operator in scenario A could defer LTE deployment to the longer term. In scenario B, in the medium term, the operator could deploy a combination of 1xRTT, EV-DO Rev A/B and LTE and, in the long term, could migrate EV-DO data traffic to LTE. In scenario C, a CDMA2000 operator with just 1xRTT could introduce LTE as a broadband service and, in the long term, could migrate 1xRTT users to LTE including voice service.


3GPP and 3GPP2 both have specified detailed migration options for current 3G systems (UMTS-HSPA and EV-DO) to LTE. Due to economies of scale for infrastructure and devices, 3GPP operators are likely to have a competitive cost advantage over Third Generation Partnership Project 2 (3GPP2) operators. One option for GSM operators that have not yet committed to UMTS, and do not have an immediate pressing need to do so, is to migrate directly from GSM/EDGE or Evolved EDGE to LTE with networks and devices supporting dual-mode GSM-EDGE/LTE operation.

Friday 26 August 2011

Two interesting NGMN papers on Backhaul

There are some interesting blog posts on Broadband Traffic Managemenet on Backhaul. Here are few excerpts:

Traditional network management practice says that network element usage level should not exceed 70% of its capacity. If it does - it is time to do something - buy more or manage it better. So, according to a recent Credit Suisse report - it is time to do something for wireless networks, globally. For North America, where current utilization at peak time reaches 80% it is even urgent.

Phil Goldstein (pictured) reports to FierceWireless that - "Wireless networks in the United States are operating at 80 percent of total capacity, the highest of any region in the world, according to a report prepared by investment bank Credit Suisse. The firm argued that wireless carriers likely will need to increase their spending on infrastructure to meet users' growing demands for mobile data .. globally, average peak network utilization rates are at 65 percent, and that peak network utilization levels will reach 70 percent within the next year. .. 23 percent of base stations globally have capacity constraints, or utilization rates of more than 80 to 85 percent in busy hours, up from 20 percent last year .. In the United States, the percentage of base stations with capacity constraints is 38 percent, up from 26 percent in 2010"

And

The Yankee Group provides the following forecast for mobile backhaul:
Average macrocell backhaul requirements were 10 Mbps in 2008 (seven T1s, five E1s). In less than three years, they have more than tripled to 35 Mbps in 2011, and by 2015, Yankee Group predicts they will demand 100 Mbps.
There were 2.4 million macro cell site backhaul connections worldwide in 2010, growing to 3.3 million by [2015?]
Yankee's new research conclude:

"The market for wholesale backhaul services in North America will grow from $2.45 billion in 2010 to $3.9 billion in 2015, with the majority of this growth coming from Ethernet backhaul. Successful backhaul service providers will be those that can demonstrate price/performance and reliability, have software tools in place and can meet the specific needs of the mobile market.

And recently:

A Dell'Oro Group report forecasts that "Mobile Backhaul market revenues are expected to approach $9B by 2015. This updated report tracks two key market segments: Transport, which includes microwave and optical equipment, and Routers and Switches, which includes cell site devices, carrier Ethernet switches, and service provider edge routers .. routers and switches expected to constitute 30% of mobile backhaul market "

Shin Umeda, Vice President of Routers research at Dell’Oro Group said: “Our research has found that operators around the world are concerned with the rate of mobile traffic growth and are transitioning to Internet Protocol (IP) technologies to build a more efficient and scalable backhaul network. Our latest report forecasts the demand for IP-based routers and switches will continue to grow through 2015, almost doubling the market size of the Router and Switches segment in the five-year forecast period”

I have some basic posts on why Backhaul is important, here and here.

NGMN has timely released couple of whitepapers on the Backhaul.

The first one, 'Guidelines for LTE Backhaul Traffic Estimation' document describes how a model is developed to predict traffic levels in transport networks used to backhaul LTE eNodeBs. Backhaul traffic is made up of a number of different components of which user plane data is the largest, comprising around 80-90% of overall traffic, slightly less when IPsec encryption is added. These results reveal that the cell throughput characteristics for data carrying networks are quite different to those of voice carrying networks.

The purpose of second one, 'NGMN Whitepaper LTE Backhauling Deployment Scenarios' is to support operators in their migration from current architectures to new, packet-based backhaul networks. With the introduction of LTE operators need to look at how the backhauling network, the network domain that connects evolved NodeBs (eNBs) to MME and S/P-GW, is capable of adapting to the new requirements, namely the adoption of a packet infrastructure, without disrupting the existing services. This paper introduces some reference architectures, moving from a pure layer 2 topology to a full layer 3 one, discussing some elements to be considered in the design process of a network.

They are both long but interesting read if you like to learn more about Backhaul and the best way in future proofing the network deployments.