Tuesday 26 October 2021

An Early View of 3GPP Release-18 5G-Advanced Topics

5G is hot at the moment. While the operators are busy rolling out the networks based on Release-15/16 features, 3GPP is working on finalising Release-17 specifications and laying the foundations for Rel-18.

The latest issue of 3GPP Highlights magazine (I prefer the PDF) contains a lot of valuable technical content, in addition to many other articles. The technical content includes:

  • An early view of the RAN Topics for 5G-Advanced
  • 5G Advanced in the Making – The TSG SA approach to Release 18
  • Application Enablement Standards in 3GPP – Maximizing the potential of 5G!
  • RAN3 flourishing in this time of change
  • Enhanced support of Industrial IoT in the 5G System (Rel-17)
  • Autonomous Network standardization in WG SA5
  • Rel-17 Edge Computing and Network Slicing charging (WG SA 5)
  • Media Production over 5G NPN

While I am not going into too much detail here, I want to highlight the 5G-Advanced topics that will be under discussion over the next couple of months. The final list will be approved by 3GPP TSGs SA, RAN and CT in December 2021.

Dr. Wanshi Chen, 3GPP TSG RAN Chair provided an early view of the RAN topics for 5G-Advanced. 

Topics Under Discussion

As well as taking a tentative decision on an 18-month duration for Release 18, the RAN workshop endorsed a list of topics for subsequent email discussions. Some of the topics in the following list also have a set of example areas, serving as a starting point for further refinement:

  • Evolution for downlink MIMO, with the following example areas:
    • Further enhancements for CSI (e.g., mobility, overhead, etc.)
    • Evolved handling of multi-TRP (Transmission Reception Points) and multi-beam
    • CPE (customer premises equipment) -specific considerations
  • Uplink enhancements, with the following example areas:
    • >4 Tx operation
    • Enhanced multi-panel/multi-TRP uplink operation
    • Frequency-selective precoding
    • Further coverage enhancements
  • Mobility enhancements, with the following example areas:
    • Layer 1/layer 2 based inter cell mobility
    • DAPS (Dual Active Protocol Stack)/CHO (Conditional HandOver) related improvements
    • FR2 (frequency range 2)-specific enhancements
  • Additional topological improvements (IAB and smart repeaters), with the following example areas:
    • Mobile IAB (Integrated Access Backhaul)/Vehicle mounted relay (VMR)
    • Smart repeater with side control information
  • Enhancements for XR (eXtended Reality), with the following example areas:
    • KPIs/QoS, application awareness operation, and aspects related to power consumption, coverage, capacity, and mobility
      • Note: only power consumption/coverage/mobility aspects specific to XR
  • Sidelink enhancements (excluding positioning), with the following example areas:
    • SL enhancements (e.g., unlicensed, power saving enhancements, efficiency enhancements, etc.)
    • SL relay enhancements
    • Co-existence of LTE V2X & NR V2X
  • RedCap evolution (excluding positioning), with the following example areas:
    • New use cases and new UE bandwidths (5MHz?)
    • Power saving enhancements
  • NTN (Non-Terrestrial Networks) evolution
    • Including both NR & IoT (Internet of Things) aspects
  • Evolution for broadcast and multicast services
    • Including both LTE based 5G broadcast and NR MBS (Multicast Broadcast Services)
  • Expanded and improved Positioning, with the following example areas:
    • Sidelink positioning/ranging
    • Improved accuracy, integrity, and power efficiency
    • RedCap positioning
  • Evolution of duplex operation, with the following example areas:
    • Deployment scenarios, including duplex mode (TDD only?)
    • Interference management
  • AI (Artificial Intelligence)/ML (Machine Learning), with the following example areas:
    • Air interface (e.g., Use cases to focus, KPIs and Evaluation methodology, network and UE involvement, etc.)
    • NG-RAN
  • Network energy savings, with the following example areas:
    • KPIs and evaluation methodology, focus areas and potential solutions
  • Additional RAN1/2/3 candidate topics, Set 1:
    • UE power savings
    • Enhancing and extending the support beyond 52.6GHz
    • CA (Carrier Aggregation)/DC (Dual-Connectivity) enhancements (e.g., MR-MC (Multi-Radio/Multi-Connectivity), etc.)
    • Flexible spectrum integration
    • RIS (Reconfigurable Intelligent Surfaces)
    • Others (RAN1-led)
  • Additional RAN1/2/3 candidate topics, Set 2:
    • UAV (Unmanned Aerial Vehicle)
    • IIoT (Industrial Internet of Things)/URLLC (Ultra-Reliable Low-Latency Communication)
    • <5MHz in dedicated spectrum
    • Other IoT enhancements/types
    • HAPS (High Altitude Platform System)
    • Network coding
  • Additional RAN1/2/3 candidate topics, Set 3:
    • Inter-gNB coordination, with the following example areas:
      • Inter-gNB/gNB-DU multi-carrier operation
      • Inter-gNB/gNB-DU multi-TRP operation
      • Enhancement for resiliency of gNB-CU
    • Network slicing enhancements
    • MUSIM (Multiple Universal Subscriber Identity Modules)
    • UE aggregation
    • Security enhancements
    • SON (Self-Organizing Networks)/MDT (Minimization of Drive Test)
    • Others (RAN2/3-led)
  • Potential RAN4 enhancements

Dr. Georg Mayer, 3GPP TSG SA Chair provides the TSG SA approach to 3GPP Release-18

The candidate items for Rel-18 include:

  • Immersive Media and Virtual/Artificial/Extended Reality (XR) Media support in Working Group (WG) SA4 and WG SA2.
  • New work areas for Internet of Things (e.g. passive IoT (WG SA2) and application capability exposure for IoT platforms (WG SA6)).
  • Proposals to for Artificial Intelligence and Machine Learning Services Transport and Management (WGs SA2, SA5).
  • Concepts for integration and migration of existing vertical infrastructure, e.g. for railway networks (WG SA6).
  • Examples for proposed enhancements to existing 3GPP services and functionalities include:
    • Network Slicing (WGs SA2, SA5)
    • Edge Computing (WGs SA2, SA5, SA6)
    • Autonomous Networks (WG SA5)
    • Service Based Architecture (WGs SA2, SA5)
    • Northbound APIs (WG SA6)
    • Non-Public Networks (WG SA2)
    • Satellite 5G Networks (WG SA2)
    • Drone support (WG SA2)
    • 5G Multicast and Broadcast (WG SA2)
    • Location Services (WG SA2, SA6)
    • Management Data Analytics (WG SA5)
    • Mission Critical Services (WG SA6)

None of these features are final but we will know in the next few months what will be included as part of Rel-18 and what won't. In the meantime, do check out the latest issue of 3GPP Highlights here.

Related Posts

Wednesday 20 October 2021

5G NR-Unlicensed (NR-U)

I have been talking about unlicensed LTE since 2013. With all the debate around LTE-U and LAA now non-existent, the technology has evolved with every new release. As can be seen from this picture by Ericsson above, 5G NR-U in Release-16 supports:

  • License-exempt Downlink (DL)
  • License-exempt scheduled Uplink (UL)
  • License-exempt autonomous UK
  • Standalone license-exempt operation

The Release-16 work item summary details the following deployment scenarios for NR-based access to unlicensed spectrum:

  • Scenario A: Carrier aggregation between NR in licensed spectrum (PCell) and NR in shared spectrum (SCell);
    • A.1: SCell is not configured with UL (DL only); 
    • A.2: SCell is configured with UL (DL+UL). 
  • Scenario B: Dual connectivity between LTE in licensed spectrum and NR in shared spectrum (PSCell);
  • Scenario C: NR in shared spectrum (PCell);
  • Scenario D: NR cell in shared spectrum and uplink in licensed spectrum;
  • Scenario E: Dual connectivity between NR in licensed spectrum (PCell) and NR in shared spectrum (PSCell)

5G New Radio Unlicensed: Challenges and Evaluation, available on arXiv here provides a lot of useful information on different kind of operations within the unlicensed band and the challenges of co-existence with Wi-Fi

Finally, Qualcomm has quite a few resources on this topic. Last year, they hosted a webinar on the topic, "How does unlicensed spectrum with NR-U transform what 5G can do for you?". The slides from that are available here and a video of that is available here. RCR Wireless also has this short article from one of the webinar presenters here.

Related Posts

Tuesday 12 October 2021

Monday 4 October 2021

Are there 50 Billion IoT Devices yet?

Detailed post below but if you are after a quick summary, it's in the picture above.

Couple of weeks back someone quoted that there were 50 billion devices last year (2020). After challenging them on the number, they came back to me to say that there were over 13 billion based on GSMA report. While the headline numbers are correct, there are some finer details we need to look at.

It all started back in 2010 when the then CEO of Ericsson announced that there will be 50 Billion IoT Devices by 2020. You could read all about it here and see the presentation here. While it doesn't explicitly say, it was expected that the majority of these will be based on cellular technologies. I also heard the number 500 Billion by 2030, back in 2013.

So the question is how many IoT devices are there today and how many of these are based on mobile cellular technologies?

The headline number provided by the GSMA Mobile Economy report, published just in time for MWC 2021, is 13.1 billion in 2020. It does not provide any further details on what kind of connectivity these devices use. I had to use my special search skills to find the details here.

As you can see, only 1.9 billion of these are based on cellular connections, of which 0.2 billion are based on licensed Low Power Wide Area (licensed LPWA, a.k.a. LTE-M and NB-IoT) connections. 

Ericsson Mobility Report, June 2021, has a much more detailed breakdown regarding the numbers as can be seen in the slide above. As of the end of 2020, there were 12.4 billion IoT devices, of which 10.7 billion were based on Short-range IoT. Short-range IoT is defined as a segment that largely consists of devices connected by unlicensed radio technologies, with a typical range of up to 100 meters, such as Wi-Fi, Bluetooth and Zigbee.

Wide-area IoT, which consists of segment made up of devices using cellular connections or unlicensed low-power technologies like Sigfox and LoRa had 1.7 billion devices. So, the 1.6 billion cellular IoT devices also includes LPWAN technologies like LTE-M and NB-IoT.

I also reached out to IoT experts at analyst firm Analysys Mason. As you can see in the Tweet above, Tom Rebbeck, Partner at Analysys Mason, mentioned 1.6 billion cellular (excluding NB-IoT + LTE-M) and 220 million LPWA (which includes NB-IoT, LTE-M, as well as LoRa, Sigfox etc.) IoT connections.

I also noticed this interesting chart in the tweet above which shows the growth of IoT from Dec 2010 until June 2021. Matt Hatton, Founding Partner of Transforma Insights, kindly clarified that the number as 1.55 billion including NB-IoT and LTE-M.

As you can see, the number of cellular IoT connections are nowhere near 50 billion. Even if we include all kinds of IoT connectivity, according to the most optimistic estimate by Ericsson, there will be just over 26 billion connections by 2026.

Just before concluding, it is worth highlighting that according to all these cellular IoT estimates, over 1 billion of these connections are in China. GSMA's 'The Mobile Economy China 2021' puts the number as 1.34 billion as of 2020, growing to 2.29 billion by 2025. Details on page 9 here.

Hopefully, when someone wants to talk about Internet of Thing numbers in the future, they will do a bit more research or just quote the numbers from this post here.

Related Posts