Showing posts with label Spectrum. Show all posts
Showing posts with label Spectrum. Show all posts

Sunday 12 March 2017

High Power / Performance User Equipment (#HPUE)

3GPP refers to HPUE as High Power UE while the US operator Sprint prefers to use the term High Performance UE.

HPUE was initially defined for US Public Safety Band 14 (700MHz). The intention was that this high power UEs can increase the coverage range from 4km to 8km. This would mean larger coverage areas and less number of cells.

While the commercial UE's (class 3) transmit at +23dBm (max 200mW), the Public Safety people intend to use class 1 UE transmitting +31 dBm (max 1.25W). It was felt that this feature could be beneficial for some TDD bands that do not have to worry about backward compatibility. One such band, pushed by Sprint was TDD Band 41 (2500MHz). As this band is for the commercial UE's, instead of class 1, class 2 power at +26dBm (max 400mW) was proposed.

3GPP TS 36.886 provides the following justification:

Currently, 3GPP has defined only Power Class UE 3 as the type of UE supported for TDD LTE band 41 operations. This definition was based on aligning TDD LTE Band 41 UE power classes with prior work in 3GPP related to other bands. However, it should be mentioned that 3GPP UE Power Class 3 definition (i.e. 23dBm) was mainly driven to ensure backward compatibility with prior technologies (i.e. GSM/UMTS) [2] so that network deployment topologies remain similar. Furthermore, maintaining the same power class UE definition (i.e. Class 3) as previous technologies would maintaining compliance with various national regulatory rulings, particularly in terms of SAR, for FDD LTE duplexing mode. 

However, TDD LTE band 41 does not have any 3GPP legacy technologies associated with it, hence the backward compatibility consideration is not applicable in its case. Also, since band 41 is defined as a TDD LTE band, it is less susceptible to SAR levels that FDD LTE bands due to SAR definition. Therefore, defining a new UE power class with higher than 23dBm Tx power for TDD LTE Band 41 operations would not compromise any of 3GPP foundational work, while improving UE and network performance. It should also be mentioned that 3GPP has done similar work on other bands (i.e. band 14) when defining a higher power class UE, hence the concept presented in this document is a continuation of that process.

The present document carries out a feasibility analysis for defining a UE Power class 2 (i.e. 26dBm) for operation on TDD LTE band 41. The document analyses current and future technological advancements in the area of UE RF front-end components and architectures that enable such definition while maintaining 3GPP specification and other regulatory bodies' requirements. It should be emphasized that this proposal only relates to single carrier UL operations on TDD band 41 (i.e. TM-1/2 modes) without affecting current 3GPP definition for UL carrier aggregation on band 41.

As you can see from the tweet above, Sprint CEO is quite pleased with the HPUE. 

SourceDiana Goovaerts

Iain Gillott, iGR points out that HPUE applies to Sprint’s 2.5 GHz TDD network and associated spectrum, and the company claims up to 30 percent increase in cell cover from the new technology.  It should be noted that HPUE is a 3GPP standard that applies to the 2.5 GHz TDD band (Band 41) and is also to be used by China Mobile and Softbank.  HPUE was developed as part of the Global TDD LTE Initiative (GTI) which includes Qualcomm Technologies, Samsung, ZTE, Broadcom, MediaTek, Skyworks Solutions, Alcatel, Motorola, LG and Qorvo... The cool part: the improvement in coverage comes from simply improving the device uplink power.  So Sprint, China Mobile and Softbank will not have to visit their cell sites to make changes; they just need 2.5 GHz TDD devices with HPUE to get the benefit.


Milan Milanović recently wrote about Sprint’s Gigabit Class LTE network goes live in New Orleans. One of the questions I had was why is the uplink so rubbish as compared to downlink. He kindly pointed out to me that this is TDD config 2
If you are wondering what is TDD Config 2, see the pic below
Source: ShareTechNote

Sprint expects HPUE to appear in postpaid devices starting in 2017, including new devices from Samsung, LG, HTC, and Moto. It’s expected that all of Sprint’s new devices will have HPUE support within the next two years.

I think it would be interesting to see how this impacts when there are a lot more users and devices. I am quite sure there will be more requests for HPUE in further TDD bands.

Related Links:

Sunday 11 September 2016

How much spectrum would 5G need?


The above picture is a summary of the spectrum that was agreed to be studied for IMT-2020 (5G). You can read more about that here. I have often seen discussions around how much spectrum would be needed by each operator in total. While its a complex question, we cannot be sure unless 5G is defined completely. There have been some discussions about the requirements which I am listing below. More informed readers please feel free to add your views as comments.


Real Wireless has done some demand analysis on how much spectrum is required for 5G. A report by them for European Commission is due to be published sometime soon. As can be seen in the slide above, one of the use cases is about multi gigabit motorway. If the operators deploy 5G the way they have deployed 4G then 56 GHz of spectrum would be required. If they move to a 100% shared approach where all operators act as MVNO and there is another entity that deploys all infrastcture, including spectrum then the spectrum requirement will go down to 14 GHz.

This is in addition to all the other spectrum for 2G, 3G & 4G that the operator already holds. I have embedded the presentation below and it can be downloaded from here:



The UK Spectrum Policy Forum (UKSPF) recently held a workshop on Frequency bands for 5G, the presentations for which are available to download on the link I provided.


Its going to be a huge challenge to estimate what applications will require how much amount of spectrum and what would be the priority as compared to other applications. mmMagic is one such group looking at spectrum requirements, use cases, new concepts, etc. They have estimated that around 3.1GHz would be required by each operator for 99% reliability. This seems more reasonable. It would be interesting to see how much would operators be willing to spend for such a quantity of spectrum.



Related posts:



Sunday 29 May 2016

5G & 802.11ax


Samsung is one of the 5G pioneers who has been active in this area for quite a while, working in different technology areas but also making results and details available for others to appreciate and get an idea on what 5G is all about. 

I published a post back in 2014 from their trials going on then. Since then they have been improving on these results. They recently also published the 5G vision paper which is available here and here.



In the recent 5G Huddle, Raj Gawera from Samsung gave an excellent presentation (below) on the topic of "The future connected world". 



What we really liked is how closely 5G and 802.11ax can be considered aligned, not only in terms of requirements but also the roadmap.

Anyway, here is the presentation embedded below. Let me know what you think in the comments below.


Saturday 9 January 2016

5G Spectrum Discussions

While most people are looking at 5G from the point of new technologies, innovative use cases and even lumping everything under sun as part of 5G, many are unaware of the importance of spectrum and the recently concluded ITU World Radio Conference 2015 (WRC-15).

As can be seen in the picture above, quite a few bands above 24GHz were identified for 5G. Some of these bands have an already existing allocation for mobile service on primary basis. What this means is that mobile services can be deployed in these bands. For 3G and 4G, the spectrum used was in bands below 4GHz, with 1800MHz being the most popular band. Hence there was never a worry for those high frequency bands being used for mobile communication.

As these bands have now been selected for study by ITU, 5G in these bands cannot be deployed until after WRC-19, where the results of these studies will be presented. There is a small problem though. Some of the bands that were initially proposed for 5G, are not included in this list of bands to be studied. This means that there is a possibility that some of the proponent countries can go ahead and deploy 5G in those bands.

For three bands that do not already have mobile services as primary allocation, additional effort will be required to have mobile as primary allocation for them. This is assuming that no problems are identified as a result of studies going to be conducted for feasibility of these bands for 5G.


To see real benefits of 5G, an operator would need to use a combination of low and high frequency bands as can be seen in the picture above. Low frequencies for coverage and high frequencies for capacity and higher data rates.


As I mentioned in an earlier blog post, 5G will be coming in two phases. Phase 1 will be Rel-15 in H2, 2018 and Phase 2, Rel-16, in Dec. 2019. Phase 1 of 5G will generally consist of deployment in lower frequency bands as the higher frequency bands will probably get an approval after WRC-19. Once these new bands have been cleared for 5G deployment, Phase 2 of 5G would be ready for deployment of these high frequency bands.

This also brings us to the point that 5G phase 1 wont be significantly different from LTE-A Pro (or 4.5G). It may be slightly faster and maybe a little bit more efficient.

One thing I suspect that will happen is start of switching off of 3G networks. The most commonly used 3G (UMTS) frequency is 2100MHz (or 2.1GHz). If a network has to keep some 3G network running, it will generally be this frequency. This will also allow other international users to roam onto that network. All other 3G frequencies would soon start migrating to 4G or maybe even 5G phase 1.

Anyway, 2 interesting presentations on 5G access and Future of mmWave spectrum are embedded below. They are both available to download from the UK Spectrum Policy Forum (SPF) notes page here.








Further reading:


Saturday 19 December 2015

ADS-B to enable global flight tracking


One of the things that the World Radio Conference 2015 (WRC-15) enabled was to provide a universal spectrum allocation for flight tracking. What this means in simple terms is that once completely implemented, flights will hopefully no longer be lost, like MH370. It will now be possible to accurately track flights with satellites across nearly 100% of the globe, up from 30% today, by 2018.

To make you better understand this, see this video below:


Automatic Dependent Surveillance (ADS) is a surveillance technique in which aircraft automatically provide, via a data link, data derived from on-board navigation and position-fixing systems, including aircraft identification, four-dimensional position and additional data as appropriate. ADS data is displayed to the controller on a screen that replicates a radar screen. ICAO Doc 4444 PANS-ATM notes that air traffic control service, may be predicated on the use of ADS provided that identification of the aircraft involved is unambiguously established. Two main versions of ADS are currently in use:

  • Automatic Dependent Surveillance-Broadcast (ADS-B) is a function on an aircraft or surface vehicle that broadcasts position, altitude, vector and other information for use by other aircraft, vehicles and by ground facilities. It has become the main application of the ADS principle.
  • Automatic Dependent Surveillance-Contract (ADS-C) functions similarly to ADS-B but the data is transmitted based on an explicit contract between an ANSP and an aircraft. This contract may be a demand contract, a periodic contract, an event contract and/or an emergency contract. ADS-C is most often employed in the provision of ATS over transcontinental or transoceanic areas which see relatively low traffic levels. 

The ITU press release on this topic:

The frequency band 1087.7-1092.3 MHz has been allocated to the aeronautical mobile-satellite service (Earth-to-space) for reception by space stations of Automatic Dependent Surveillance-Broadcast (ADS-B) emissions from aircraft transmitters.

The frequency band 1087.7-1092.3 MHz is currently being utilized for the transmission of ADS-B signals from aircraft to terrestrial stations within line-of-sight. The World Radiocommunication Conference (WRC-15) has now allocated this frequency band in the Earth-to-space direction to enable transmissions from aircraft to satellites. This extends ADS-B signals beyond line-of-sight to facilitate reporting the position of aircraft equipped with ADS-B anywhere in the world, including oceanic, polar and other remote areas.

WRC-15 recognized that as the standards and recommended practices (SARP) for systems enabling position determination and tracking of aircraft are developed by the International Civil Aviation Organization (ICAO), the performance criteria for satellite reception of ADS-B signals will also need to be addressed by ICAO.

This agreement follows the disappearance and tragic loss of Malaysian Airlines Flight MH370 in March 2014 with 239 people on board, which spurred worldwide discussions on global flight tracking and the need for coordinated action by ITU and other relevant organizations.

For more details see: globalflightsafety.org

Wednesday 21 October 2015

Spectrum Sharing using Licensed Shared Access (LSA)

The UK Spectrum Policy Forum has just released a report looking at Spectrum sharing approaches and in particular, Licensed Shared Access (LSA). I really like this picture shown above that summarises different approached like the DSA, LSA, etc. The report is available to download from here and is embedded below.



Related posts:

Sunday 4 October 2015

Updates from the 3GPP RAN 5G Workshop - Part 2

I have finally got round to having a look at some more presentations on 5G from the recently concluded 3GPP RAN 5G Workshop. Part 1 of the series is here.
Panasonic introduced this concept of Sub-RAT's and Cradle-RAT's. I think it should be obvious from the picture above what they mean but you can refer to their presentation here for more details.


Ericsson has provided a very detailed presentation (but I assume a lot of slides are backup slides, only for reference). They have introduced what they call as "NX" (No compatibility constraints). This is in line to what other vendors have referred to as well that above 6GHz, for efficiency, new frame structures and waveforms would serve best. Their slides are here.



Nokia's proposal is that in the phase 1 of 5G, the 5G Access point (or 5G NodeB) would connect to the 4G Evolved Packet Core (EPC). In phase 2, both the LTE and the 5G (e)NodeB's would connect to the 5G core. Their presentation is available here.

Before we move on to the next one, I should mention that I am aware of some research that is underway, mostly by universities where they are exploring an architecture without a centralised core. The core network functionality would be distributed and some of the important data would be cached on the edge. There will be challenges to solve regarding handovers and roaming; also privacy and security issues in the latter case.
I quite like the presentation by GM research about 5G in connected cars. They make a very valid point that "Smartphones and Vehicles are similar but not the same. The presentation is embedded below.



Qualcomm presented a very technical presentation as always, highlighting that they are thinking about various future scenarios. The picture above, about phasing is in a way similar to the Ericsson picture. It also highlights what we saw in part 1, that mmW will arrive after WRC-19, in R16. Full presentation here.


The final presentation we are looking is by Mitsubishi. Their focus is on Massive MIMO which may become a necessity at higher frequencies. As the frequency goes higher, the coverage goes down. To increase the coverage area, beamforming can be used. The more the antennas, the more focused the beam could be. They have also proposed the use of SC-FDMA in DL. Their presentation is here and also embedded below.



Monday 21 September 2015

Updates from the 3GPP RAN 5G Workshop - Part 1

3GPP held a 5G Workshop in Phoenix last week. 550 delegates and over 70 presentations contributed to the discussion, which covered the full range of requirements that will feed TSG RAN work items for the next five years. I will eventually look at all the presentations and highlight the ones that I find interesting as a part of this blog. Due to the vast number of presentations, I will split them into a few blog posts.

Lets start with the chairman summary. The chair highlighted three high level use cases that 5G needs to address (This has been highlighted in many presentations, see here for example):
  • Enhanced Mobile Broadbandare 
  • Massive Machine Type Communications
  • Ultra-reliable and Low Latency Communications
As can be seen in the picture above, 3GPP is planning to split the 5G work into two phases. Phase 1 (Rel-15) will look at a subset of requirements that are important for the commercial needs of the day. Phase 2 (Rel-16) will look at more features, use cases, detailed requirements, etc.

Here is the chair summary of the workshop:




The presentation (RWS-150002) from Motorola/Lenovo highlighted the need to handle different spectrum. For sub-6GHz, the existing air interface could work with slight modifications. For spectrum between 6GHz and 30GHz, again a similar air interface like 4G may be good enough but for above 30GHz, there is a need for new one die to phase noise.

The presentation by CATT or China Academy of Telecommunication Technology (RWS-150003) is quite interesting and is embedded below. They also propose Pattern Division Multiple Access (PDMA).




Orange (RWS-150004) has definitely put a thought into what good 5G would be. Their presentation is embedded below too:




The presentation from Huawei (RWS-150006) introduced the concept of Unified Air Interface, UAI.



They presentation also explains the concept of Adaptive Frame structures and RAN slicing very well. For those who may be wondering, uMTC stands for ultra-reliable MTC and mMTC stands for massive MTC. RAN slicing enables the RAN to be partitioned such that a certain amount of carriers are always dedicated to a certain services independently of other services. This ensures that the service in the slice is always served reliably.

The final presentation is the vision and priorities by 5GPPP as follows:



Tuesday 4 August 2015

The Importance of License Exempt Frequency Bands


Some of you may be aware that I am also a Technical Programme Manager with the UK Spectrum Policy Forum. Recently we published a whitepaper that we had commissioned to Plum consulting on "Future use of Licence Exempt Radio Spectrum". It is an interested read not only for spectrum experts but also for people trying to understand the complex world of spectrum.

The report is very well written. Here are a few extracts in purple:

Licence exempt frequency bands are those that can be used by certain applications without the need for prior authorisation or an individual right of use. This does not mean that they are not subject to regulation – use must still comply with pre-defined technical rules to minimise the risk of interference. Most licence exempt bands are harmonised throughout Europe and are shared with other services or applications, such as radars or industrial, scientific and medical (ISM) equipment. Wi-Fi and Bluetooth are probably the most familiar examples of mass-market licence exempt wireless applications, but the bands support many other consumer devices, such as cordless phones, doorbells, car key fobs, central heating controllers, baby monitors and intruder alarms. Looking to the future, licence exempt bands are likely to be a key enabler of wireless machine to machine (M2M) communication applications.

Key benefits of licence exempt bands include:
  • For end-users:
    • Greater convenience and flexibility by avoiding the need for lengthy runs of cable in home and work environments
    • Ability to connect mobile devices to a fixed broadband network, reducing dependence on the mobile network and potentially saving costs both for the service provider and the end-user
    • Enhanced convenience, safety and security, e.g. through installation of low cost wireless alarm systems or ability to unlock vehicles remotely rather than fumbling with keys
  • For equipment vendors and operators:
    • Facilitating market entry – there is no need to acquire a licence to deploy a service
    • Enabling niche applications or services to be addressed quickly and cheaply using existing technology and spectrum – this has been particularly effective in serving new machine to machine (M2M) applications in areas such as health, transport and home automation.
    • Providing certainty about spectrum access – there is no need to compete or pay for spectrum access (though the collective nature of spectrum use means quality of service cannot be guaranteed)
    • The ability to extend the reach of fixed communication networks, by providing wireless local area connectivity in homes, businesses and at public traffic hotspots.
The two most notable drawbacks are the inability to guarantee quality of service and the more limited geographic range that is typically available (reflecting the lower power limits that apply to these bands). Licence exempt wireless applications cannot claim protection from interference arising from other users or radio services. They operate in shared frequency bands and must not themselves cause harmful interference to other radio services.

From a regulator’s perspective, licence exempt bands can be more problematic than licensed bands in terms of refarming spectrum, since it is difficult to prevent the continued deployment of legacy equipment in the bands or to monitor effectively their utilisation. There is also generally no control over numbers and / or location of devices, which can make sharing difficult and limits the amount of spectrum that can be used in this way.

In Europe, regulation of licence exempt bands is primarily dealt with at an international level by European institutions. Most bands are fully harmonised, whereby free circulation of devices that comply with the relevant standards is effectively mandated throughout the EU. However some bands are subject to “soft” harmonisation, where the frequency limits and technical characteristics are harmonised but adoption of the band is left to national administrations to decide.

A key recommendation, which I think would be very interesting and useful would be: Promote further international harmonisation of licence exempt bands, in particular the recently identified 870 – 876 MHz and 915 – 921 MHz band that are likely to be critical for supporting future M2M demand growth in Europe.

Note that a similar sub-1GHz band has been recommended for 5G for M2M/IoT. The advantage for low frequencies is that the coverage area is very large, suitable for devices with low date rates. Depending on how the final 5G would be positioned, it may well use the license exempt bands, similar to the LAA/LTE-U kind of approach maybe.

The whitepaper is embedded below and is available to download from here:




Sunday 10 May 2015

LTE-Broadcast making a push while Terrestrial broadcast still popular as ever



"TV isn't dying, it's having babies." This quote made my day. I have argued a few times in the past that terrestrial broadcasting will continue working and will be probably the most popular approach for a long time to come. The way things work with it may change. Multi-screen is one possible approach but you may have more interactions like 'red button functionality', etc.
Anyway, in Europe 800MHz spectrum has been cleared for use by Mobile Broadband technologies (LTE mainly). 700MHz is planned to be cleared as well by 2020, as per the suggestion in Lamy report. The other UHF band from 470MHz to 694MHz would be left as it is until 2030, with a review planned in 2025.

This has forced even big players like BBC to start looking at other mechanisms to deliver TV. While BBC3 was moved to online only, BBC is also exploring how to use LTE-Multicast to deliver content. It has been working to have its very popular iPlayer work with eMBMS.

Embedded below is a presentation from Cambridge Wireless CWTEC 2015 conference.




eMBMS is gaining popularity with its presence in lot more chipsets and even more trials. GSA report has shown that there are quite a few trials going on worldwide but the question remains about the business models. Most operators would not like to become content providers and compete with the incumbents in their markets. Having someone like BBC in the UK is helpful but not sure how many such options are available worldwide. Embedded below is the GSA presentation




There were some nice pictures from MWC as can be seen above. Ericsson has a video as well (below) on how the app works.



D-Link is also working on M2M modules that could be used in billboards to dynamically update the ads at very regular intervals. There is a video here that explains this further.

Finally here is a Video from Visteon/Verizon that explains how LTE-Multicast can be used to deliver software updates in the connected car:



Finally, here are couple of presentations that may interest you too:



Saturday 25 April 2015

Mobile Telecoms Technology & Market Disruptions

Sometimes its good to take a step back and look at the new applications and services that are already happening or may be happening sometime soon. Some of these have a possibility to disrupt the existing industries and markets, giving rise to not only new players but a completely new order.

Embedded below is a presentation from Dean Bubley of Disruptive Analysis. While there are a few things that I look at differently, there are many interesting points that the industry should already be looking at.


A good example of disruption would be the SIM card evolution that Apple introduced in iPadAir2 and iPadMini3. While they had great expectations, it didnt work out exactly as they had hoped due to the operators not letting Apple use the feature they wanted. In fact John Legere, T-Mobile US CEO, took to twitter to explain the problem. See here.

Another example is the new MVNO model by Google (Fi) in the USA. The problem in USA compared to Europe is that the operators have monopoly in many areas (fixed and mobile) and they can also get away with charging far higher amounts.




In addition, the problem that the operators have is that they focus on areas where they don't have issues; crying wolf if required. An example is taking advantage of 'data tsunami' and using it to hoard spectrum, as be seen from the tweet below:

Anyway, here is the presentation. Let me know what you think.



Sunday 12 April 2015

LTE-Hetnet (LTE-H) a.k.a. LTE Wi-Fi Link Aggregation (LWA)


We have talked about the unlicensed LTE (LTE-U), re-branded as LTE-LAA many times on this blog and the 3G4G Small Cells blog. In fact some analysts have decided to call the current Rel-12 non-standardised Rel-12 version as LTE-U and the standardised version that would be available as part of Release-13 as LTE-LAA.

There is a lot of unease in the WiFi camp because LTE-LAA may hog the 5GHz spectrum that is available as license-exempt for use of Wi-Fi and other similar (future) technologies. Even though LAA may be more efficient as claimed by some vendors, it would reduce the usage for WiFi users in that particular spectrum.

As a result, some vendors have recently proposed LTE/WiFi Link Aggregation as a new feature in Release-13. Alcatel-Lucent, Ruckus Wireless and Qualcomm have all been promoting this. In fact Qualcomm has a pre-MWC teaser video on Youtube. The demo video is embedded as follows:



The Korean operator KT was also involved in demoing this in MWC along with Samsung and Qualcomm. They have termed this feature as LTE-Hetnet or LTE-H.

The Korean analyst firm Netmanias have more detailed technical info on this topic.

Link aggregation by LTE-H demonstrated at MWC 2015 (Source: Netmanias)

As can be seen the data is split/combined in PDCP layer. While this example above shows the practical implementation using C-RAN with Remote Radio Head (RRH) and BaseBand Unit (BBU) being used, the picture at the top shows LTE Anchor in eNodeB. There would be a need for an ideal backhaul to keep latency in the eNodeB to minimum when combining cellular and WiFi data.

Comparison of link level Carrier Aggregation technologies (Source: Netmanias)

The above table shows comparison between the 3 main techniques for increasing data rates through aggregation; CA, LTE-U/LAA and LTE-H/LWA. While CA has been part of 3GPP Release-10 and is available in more of less all new LTE devices, LTE-U and LTE-H is new and would need modifications in the network as well as in the devices. LTE-H would in the end provide similar benefits to LTE-U but is a safer option from devices and spectrum point of view and would be a more agreeable solution by everyone, including the WiFi community.

A final word; last year we wrote a whitepaper laying out our vision of what 4.5G is. I think we put it simply that in 4.5G, you can use WiFi and LTE at the same time. I think LTE-H fulfills that vision much better than other proposals.

Saturday 28 March 2015

Report on Spectrum Usage and Demand in the UK


Last week at work, we released a report titled "UK Spectrum Usage & Demand". The only time most people hear about spectrum is when there are some auctions going on. Often a small chunk of spectrum gets sold off for billion(s) of dollars/pounds and these surely make a headline. As I recently found out, 50% of spectrum in UK is shared and 25% is license exempt.

Anyway, this first edition of the report focuses on Public Mobile, Utilities, Business Radio and Space/Satellites. Space is becoming an important area of focus here as it is a significant contributor to the UK economy.

Anyway, the report is embedded below and is available to download from here:



Tuesday 3 February 2015

5G: A 2020 Vision


I had the pleasure of speaking at the CW (Cambridge Wireless) event ‘5G: A Practical Approach’. It was a very interesting event with great speakers. Over the next few weeks, I will hopefully add the presentations from some of the other speakers too.

In fact before the presentation (below), I had a few discussions over the twitter to validate if people agree with my assumptions. For those who use twitter, maybe you may want to have a look at some of these below:







Anyway, here is the presentation.

 

Friday 12 December 2014

5G Spectrum and challenges

I was looking at the proposed spectrum for 5G last week. Anyone who follows me on Twitter would have seen the tweets from last weekend already. I think there is more to discuss then just tweet them so here it is.




Metis has the most comprehensive list of all the bands identified from 6GHz, all the way to 86GHz. I am not exactly sure but the slide also identifies who/what is currently occupying these bands in different parts of the world.


The FCC in the USA has opened a Notice of Inquiry (NoI) for using the bands above 24GHz for mobile broadband. The frequency bands above have a potential as there is a big contiguous chunk of spectrum available in each band.



Finally, the slides from ETRI, South Korea show that they want to have 500MHz bandwidth in frequencies above 6GHz.

As I am sure we all know, the higher the frequency, the lower the cell size and penetration indoors. The advantage on the other hand is smaller cell sizes, leading to higher data rates. The antennas also become smaller at higher frequencies thereby making it easier to have higher order MIMO (and massive MIMO). The only way to reliably be able to do mobile broadband is to use beamforming. The tricky part with that is the beam has to track the mobile user which may be an issue at higher speeds.

The ITU working party 5D, recently released a draft report on 'The technical feasibility of IMT in the bands above 6 GHz'. The document is embedded below.




xoxoxo Added Later (13/12/2014) xoxoxo
Here are some links on the related topic:


xoxoxo Added Later (18/12/2014) xoxoxo
Moray Rumney from Keysight (Agilent) gave a presentation on this topic in the Cambridge Wireless Mobile Broadband SIG event yesterday, his presentation is embedded below.



Friday 21 November 2014

In-flight broadband connectivity service with speeds up to 75Mbps


Came across the following Inmarsat press release:

The new network represents two world-beating achievements for Inmarsat and its partners. It will be the world’s first truly hybrid aviation network, consisting of an S-band satellite (Europasat), constructed by Thales Alenia Space, and a Europe-wide S-band ground network. Over the integrated network, based on state-of-the-art LTE technology and access to sufficient spectrum resources, Inmarsat will be offering airlines the world’s fastest in-flight broadband connectivity service with speeds up to 75Mbps, far in excess of the limited capabilities of North American ATG systems.
Alcatel-Lucent and Inmarsat will work together to develop the ground infrastructure component of the new Europe-wide network. Alcatel-Lucent has proven expertise in the development of 4G LTE-based air-to-ground technology and was the world’s first company to field trial this technology in 2011. The initial contract awarded to Alcatel-Lucent will see the global telecommunications equipment company adapting their existing 4G LTE technology to support the S-band spectrum.
Recently Christophe WILHELM, Senior VP Strategy & Innovation, Thales Alenia Space gave a presentation in the Digiworld Summit 2014.



His presentation is above and the video is as follows. Please forward to 1:36:00 to watch his part



Tuesday 11 November 2014

New Spectrum Usage Paradigms for 5G

Sometime back I wrote a post that talked about Dynamic Spectrum Access (DSA) techniques for Small Cells and WiFi to work together in a fair way. The Small Cells would be using the ISM bands and Wi-Fi AP's would also be contending for the same spectrum. For those who may not know, this is commonly referred to as LTE-U but the correct term that is being used in standards is LA-LTE, see here for details.

IEEE Comsoc has just published a whitepaper that details how the spectrum should be handled in 5G to make sure of efficient utilisation. The whitepaper covers the following:

Chapter 2 – Introduction, the traditional approach of repurposing spectrum and allocating it to Cellular Wireless systems is reaching its limits, at least below the 6GHz threshold. For this reason, novel approaches are required which are detailed in the sequel of this White Paper.

Chapter 3 - Spectrum Scarcity - an Alternate View provides a generic view on the spectrum scarcity issue and discusses key technologies which may help to alleviate the problem, including Dynamic Spectrum Management, Cognitive Radios, Cognitive Networks, Relaying, etc. 

Chapter 4 – mmWave Communications in 5G addresses a first key solution. While spectrum opportunities are running out at below 6 GHz, an abundance of spectrum is available in mmWave bands and the related technology is becoming mature. This chapter addresses in particular the heterogeneous approach in which legacy wireless systems are operated jointly with mmWave systems which allows to combine the advantages of both technologies. 

Chapter 5 – Dynamic Spectrum Access and Cognitive Radio: A Current Snapshot gives a detailed overview on state-of-the-art dynamic spectrum sharing technology and related standards activities. The approach is indeed complementary to the upper mmWave approach, the idea focuses on identifying unused spectrum in time, space and frequency. This technology is expected to substantially improve the usage efficiency of spectrum, in particular below the 6GHz range. 

Chapter 6 – Licensed Shared Access (LSA) enables coordinated sharing of spectrum for a given time period, a given geographic area and a given spectrum band under a license agreement. In contract to sporadic usage of spectrum on a secondary basis, the LSA approach will guarantee Quality-of-Service levels to both Incumbents and Spectrum Licensees. Also, a clear business model is available through a straightforward license transfer from relevant incumbents to licensees operating a Cellular Wireless network in the concerned frequency bands. 

Chapter 7 – Radio Environment Map details a technology which allows to gather the relevant (radio) context information which feed related decision making engines in the Network Infrastructure and/or Mobile Equipment. Indeed, tools for acquiring context information is critical for next generation Wireless Communication systems, since they are expected to be highly versatile and to constantly adapt. 

Chapter 8 – D2DWRAN: A 5G Network Proposal based on IEEE 802.22 and TVWS discusses the efficient exploitation of TV White Space spectrum bands building on the available IEEE 802.22 standard. TV White Spaces are indeed located in highly appealing spectrum bands below 1 GHz with propagation characteristics that are perfectly suited to the need of Wireless Communication systems. 

Chapter 9 – Conclusion presents some final thoughts. 

The paper is embedded as follows:



Sunday 19 October 2014

What is (pre-5G) 4.5G?

Before we look at what 4.5G is, lets look at what is not 4.5G. First and foremost, Carrier Aggregation is not 4.5G. Its the foundation for real 4G. I keep on showing this picture on Twitter


I am sure some people much be really bored by this picture of mine that I keep showing. LTE, rightly referred to as 3.9G or pre-4G by the South Korean and Japanese operators was the foundation of 'Real' 4G, a.k.a. LTE-Advanced. So who has been referring to LTE-A as 4.5G (and even 5G). Here you go:


So lets look at what 4.5G is.
Back in June, we published a whitepaper where we referred to 4.5G as LTE and WiFi working together. When we refer to LTE, it refers to LTE-A as well. The standards in Release-12 allow simultaneous use of LTE(-A) and WiFi with selected streams on WiFi and others on cellular.


Some people dont realise how much spectrum is available as part of 5GHz, hopefully the above picture will give an idea. This is exactly what has tempted the cellular community to come up with LTE-U (a.k.a LA-LTE, LAA)

In a recent event in London called 5G Huddle, Alcatel-Lucent presented their views on what 4.5G would mean. If you look at the slide above, it is quite a detailed view of what this intermediate step before 5G would be. Some tweets related to this discussion from 5G Huddle as follows:


Finally, in a recent GSMA event, Huawei used the term 4.5G to set out their vision and also propose a time-frame as follows:



While in Alcatel-Lucent slide, I could visualise 4.5G as our vision of LTE(-A) + WiFi + some more stuff, I am finding it difficult to visualise all the changes being proposed by Huawei. How are we going to see the peak rate of 10Gbps for example?

I have to mention that I have had companies that have told me that their vision of 5G is M2M and D2D so Huawei is is not very far from reality here.

We should keep in mind that this 4G, 4.5G and 5G are the terms we use to make the end users aware of what new cellular technology could do for them. Most of these people understand simple terms like speeds and latency. We may want to be careful what we tell them as we do not want to make things confusing, complicated and make false promises and not deliver on them.

xoxoxo Added on 2nd January 2015 oxoxox

Chinese vendor ZTE has said it plans to launch a ‘pre-5G’ testing base station in 2015, commercial use of which will be possible in 2016, following tests and adjustment. Here is what they think pre-5G means: