Non-Voice Emergency Services (NOVES)

Its been a while we talked about SMS for Emergency purposes and eCall. A new study item in 3GPP has looked at non-voice alternatives for Emergency purposes.

Picture Source: Dailymail

The following is from the recent 4G Americas report entitled: 4G Mobile Broadband Evolution: 3GPP Release-10 and Beyond:

Non-verbal communications such as text messaging and instant messaging via wireless devices has been very successful and continues to expand. Many of the consumers assume that they can utilize these types of non-verbal communications as mechanisms to communicate with emergency services whenever emergency assistance is required. Such mechanisms currently do not exist. The Emergency Services community has a desire to have multimedia emergency services supported with the same general characteristics as emergency voice calls.

Currently, service requirements for emergency calls (with or without the IP Multimedia Core Network) are limited to voice media. The Non-Voice Emergency Services (NOVES) is intended to be an end-to-end citizen to authority communications. NOVES could support the following examples of non-verbal communications to an emergency services network:

1. Text messages from citizen to emergency services

2. Session-based and session-less instant messaging type sessions with emergency services

3. Multimedia (e.g., pictures, video clips) transfer to emergency services either during or after other communications with emergency services.

4. Real-time video session with emergency services

In addition, to support the general public, this capability would facilitate emergency communications to emergency services by individuals with special needs (e.g., hearing impaired citizens).

The objectives of this study include the following questions for NOVES with media other than or in addition to voice:

1. What are the requirements for NOVES?

2. What are the security, reliability, and priority handling requirements for NOVES?

3. How is the appropriate recipient emergency services system (e.g., PSAP) determined?

4. What are the implications due to roaming?

5. Are there any implications to hand over between access networks?

6. Are there any implications due to the subscriber crossing a PSAP boundary during NOVES communications (e.g., subsequent text messages should go to the same PSAP)?

7. Do multiple communication streams (e.g., voice, text, video emergency services) need to be associated together?

8. What types of “call-back” capabilities are required?

9. What are the load impacts of NOVES in the case of a large scale emergency event or malicious use?

NOVES will be applicable to GPRS (GERAN, UTRAN) and to EPS (GERAN, UTRAN, E-UTRAN and non-3GPP). The content may be transmitted between the subscribers and the emergency services which might bring new security issues. Therefore, the security impacts need to be studied.

You can spend your weekend reading the 3GPP Study Item TR 22.871: Study on Non-Voice Emergency Services (Release 11).

A word of caution, the name NOVES may be changed in future as Emergency agencies in Europe have an objection to the name. See here and here.

Smarter Cars of the Future

We all know that cars are getting smarter. Back in Oct., Google unveiled the cars that can drive by themselves. I am sure they will make our life much better and we will be able to catch on the sleep at early morning commute.

Then there were quite a few futuristic cars at the CES 2011 last month. One such video is embedded below.

The following is a summary from the an IEEE article:

Cars have been getting smarter for years, studded with suites of sensors and supporting electronics aimed at keeping them from crashing. But entertainment and convenience have rapidly caught up to safety as the impetus for new in-car electronics development. Because automakers typically spend three years developing and producing new cars—and new gadget candy to go with them—they’ve found themselves constantly playing catch-up with consumer electronics and consumer expectations. So car companies have teamed up with the makers of smartphone software platforms to integrate a spectacular array of apps designed for handsets with cars’ digital dashboards, center consoles, and speaker systems.

Take for instance Ford’s new Focus all-electric vehicle, which made a big splash at the 2011 International Consumer Electronics Show in Las Vegas last month. It features a software application called MyFord Mobile.

The app, which runs on Ford’s proprietary Sync platform and is compatible with the BlackBerry, iPhone, and Android devices, links the car with the driver’s smartphone and home computer. The software lets the driver listen to a smartphone’s music library and lets passengers watch movies or TV shows. It delivers information such as when electricity prices are at their lowest (to allow for the cheapest battery recharging) and where the nearest charging stations are. And it allows a smartphone to function as a remote control, by means of a connection to cloud-based servers. This remote communication lets the handset keep tabs on the car’s location and the batteries’ state of charge. It will also let the driver start the Focus EV from indoors on a blustery January morning, then step into a car whose seats and steering wheel are already warm. The MyFord Mobile app lets the driver remotely start the car, turn on the heater or air conditioner, or unlock the doors from anywhere in the world (including beneath the bedcovers).

And because the system differentiates one driver’s key from another’s, it presents information on the reconfigurable 4-inch screens on either side of the speedometer in the current driver’s preferred color and style. The state of charge, for example, could be shown as a percentage of the full charge, as an estimate of the remaining miles before recharging, or as a simple bar that gets shorter as the batteries’ energy is consumed. This differentiation also works for utility and entertainment options; it automatically queues up driver A’s list of radio station presets, favorite mobile apps, and preferred display options for the 8-inch center console touch screen. Because MyFord Mobile links the Focus to the driver’s handset, it can also access his or her contact list for hands-free calling and read out e-mails and texts through the car’s speakers.

Ford is trying to position itself as a technological leader in the automotive industry with MyFord Mobile and Sync AppLink Voice Control, which puts the driver in control of all the Sync system’s capabilities via voice commands, but it has stiff competition from the likes of Mercedes-Benz, Continental, and Toyota. Launched by Mercedes-Benz in November 2009, the Mbrace system, designed and engineered by Hughes Telematics of Atlanta, was the first telematics service on the market to give smartphones the power to remotely lock, unlock, or locate a car. It didn’t signal a revolution in the way the average driver interacts with his or her vehicle because when the German luxury vehicle maker offers a new technology or set of features, there is usually a multiyear wait for them to trickle down to cars whose sticker prices aren’t stratospheric.

The second generation of Mbrace debuted last September. It introduced Mercedes-Benz Concierge, which not only opens the car to information from the outside but also makes some car-based information and entertainment options portable. The Mbrace Mobile Application 2.0 gives iPhone and Blackberry users single-phone-number access to recommendations for nearby entertainment and restaurant options, directions, traffic updates, and more, whether the person is in the car or not. The concierge then sends destination information to the smartphone or directly to the in-vehicle navigation system. With the Mbrace system’s latest wrinkle, the Drive2Friend service, the driver can dictate a friend’s mobile number and the app sends a text message reporting that the driver is trying to find the person. The friend has the option of allowing his or her location to be sent back to the car via cellular triangulation.

While Ford was showing off its wares at CES, Continental was also there showcasing the Android-based AutoLinQ system, which lets the driver connect to the car in three ways.

AutoLinQ’s Mobile View lets you to send text messages to your car; the smart vehicle can text you back with information such as its location. In this demo [Flash video], a smartphone user is shown making a remote inquiry about the status of his car. Mobile View reports that the sunroof is open and offers the option to close it or ignore the warning. When he taps Close on the handset’s touch screen, the sunroof’s glass panel glides shut. This type of call-and-response vehicle update also tells whether doors are closed and locked and whether the headlights or interior lights are on. Mobile View doesn’t wait for a query to alert the driver when the alarm is triggered, the battery is depleted, the air bag has been activated, or the internal temperature of the car is too high or low. And like MyFord Mobile, it turns the smartphone into a remote control for locking and unlocking the doors, starting the engine, flashing the lights, and more.

AutoLinQ’s Home View lets you download apps and configure vehicle settings from your home computer. Clickable tabs at the bottom of the Home View screen let the car owner move through screens showing a wealth of data on the car’s status, driver preferences, navigation information, and applications that can be downloaded or fine-tuned. The status menu tells whether the ignition is on and displays the fuel and motor oil levels, the pressure for each of the four tires, and much, much more.

Car View, in AutoLinQ, is for updating features from the driver’s seat. Car View provides the same information as Home View but lets the driver use the center console touch screen to download apps on the fly that provide better control of the car and the ability to remotely manipulate electronic devices back home. An app that sends an alert when a game or match in the driver’s favorite sport is about to appear on television also gives the option to activate a digital video recorder at home, pull up a Web site featuring periodic updates about the game, or listen to play-by-play on the radio.

Continental is also designing unique apps that will enhance vehicle performance. For instance, the Filling Assistant will detect underinflated tires and notify the driver. When the driver goes to inflate the tires, the Filling Assistant will report pressure information to the driver’s smartphone and honk the car’s horn or flash its lights to indicate when a tire has enough air.

Not to be left out, Toyota, the world’s leading automaker, debuted the QNX-based Entune at CES 2011. Entune is an upgradable suite of entertainment, navigation, and information functions. "Consumers have grown accustomed to having the world at their fingertips through their mobile phones," says Jon Bucci, vice president of Toyota’s advanced technology department, who notes that putting them in the car is a natural evolution.

After downloading the Toyota Entune app to a handset and syncing it with the Toyota vehicle, the driver can begin accessing content and services, including Bing for Web navigation and OpenTable, which can make reservations at any one of 15 000 restaurants, with directions sent seamlessly to the navigation system and information appearing on the center console. Entune also lets a driver get customizable real-time traffic updates, sports, weather, stocks, and information on prices at local fueling stations. The system doesn’t forget music, which has almost always been a part of the driving experience. Entune includes Iheartradio, which delivers roughly 750 local radio stations at the touch of a button.

The tide of apps extending handset capabilities to cars will only continue to rise. ABI Research, in Oyster Bay, N.Y., reports that the number of users of automotive apps will increase from 1.4 million in 2010 to more than 28 million by 2015. And according to Global Industry Analysts, the vehicle telematics market is expected to reach US $11.2 billion by 2015.

You can read the complete article here.

In other news, Robots in future will have their own Internet and content like Wikipedia, etc. Does anyone else remember 'The Terminator'?

QoS Control based on Subscriber Spending Limits (QOS_SSL)

Quality of Service (QoS) is very important in LTE/LTE-A and the operators are taking extra efforts to maintain the QoS in the next generation of networks. They are resorting in some cases to Deep packet Inspections (DPI) based controlling of packets and in some cases throttling of data for bandwidth hogs.

The following is from a recent 4G Americas report I blogged about here:

This work item aims to provide a mechanism to allow a mobile operator to have a much finer granularity of control of the subscriber’s usage of the network resources by linking the subscriber’s data session QoS with a spending limit. This gives the operator the ability to deny a subscriber access to particular services if the subscriber has reached his/her allocated spending limit within a certain time period. It would be useful if, in addition, the bandwidth of a subscriber’s data session could be modified when this spending level is reached. This could be done depending on, for example, the type of service being used by the subscriber, the subscriber’s spending limit and amount already spent and operator’s charging models. This allows the operator to have an additional means of shaping the subscriber’s traffic in order to avoid subscribers monopolizing the network resource at any given time. Since support for roaming scenarios is needed, the possibility to provide support for roaming subscribers without having dedicated support in the visited network is needed.

Upon triggers based on the operator’s charging models, the subscriber could be given the opportunity to purchase additional credit that increases the spending limit.

The objective of this study is to provide use cases/service requirements and specs that allow:

* Modification of QoS based on subscriber’s spending limits

* Enforcing of spending limits for roaming subscribers without having dedicated support in the visited network

For further details see: 3GPP TS 22.115 Service aspects; Charging and billing (Release 11)

FlashLinq: A P2P Network For Nearby Phones

Looks like the new technologies and enhancements just keep coming.

Following from MobileCrunch:

Imagine being at a concert. As the band wraps up their last song, the lead singer takes the mic and says: “Thanks for coming out everyone! Just for being here, we’re giving you all an exclusive track from our upcoming CD. It should be available on the local wireless network… now!”

Generally, pulling off something like this would be nigh impossible. You’d need a pretty intense wireless infrastructure to handle thousands of freebie-hungry concert goers connecting at once, and then an even beefier backbone to handle the actual transfer. That’s where Qualcomm’s new localized P2P network technology, FlashLinq, comes into play.

As Qualcomm puts it, FlashLinq “enables devices to discover each other automatically and continuously, and to communicate, peer-to-peer, at broadband speeds without the need for intermediary infrastructure.”

In other words, it’ll build a wireless network between FlashLinq-enabled devices, allowing those devices to pass data (like the theoretical exclusive track mentioned above) without some monstrous server doing all the heavy lifting. Qualcomm says

“But wait!” you say, “Isn’t this what WiFi Direct was built for?”.

Yep — the key difference here is that while WiFi Direct can share files between devices, FlashLinq can do that and share connectivity to a cellular network. Nice idea for those situations when only a handful of people in a big crowd can actually manage to pull down any data, right?

So, when can we expect this tech to roll out? Not for a while. Qualcomm’s working with South Korea’s SK Telecom to test out the tech, with trials beginning later this year. If those go well, Qualcomm will have the task of convincing other hardware partners to build this tech into their new gear.

A presentation on FlashLinq below:

FlashLinQ: A Clean Slate Design for Ad Hoc Networks

View more presentations from Zahid Ghadialy

VoLTE: Semi-Persistent Scheduling (SPS) and TTI Bundling

The following is from the recently released 4G Americas paper '4G Mobile Broadband Evolution: 3GPP Release-10 and beyond:

With the support of emergency and location services in Rel-9, interest in Voice over LTE (VoLTE) has increased. This is because the Rel-9 enhancements to support e911 were the last step to enable VoLTE (at least in countries that mandate e911) since the Rel-8 specifications already included the key LTE features required to support good coverage, high capacity/quality VoLTE. There are two main features in Rel-8 that focus on the coverage, capacity and quality of VoLTE: Semi-Persistent Scheduling (SPS) and TTI Bundling.

SPS is a feature that significantly reduces control channel overhead for applications that require persistent radio resource allocations such as VoIP. In LTE, both the DL and UL are fully scheduled since the DL and UL traffic channels are dynamically shared channels. This means that the physical DL control channel (PDCCH) must provide access grant information to indicate which users should decode the physical DL shared channel (PDSCH) in each subframe and which users are allowed to transmit on the physical UL shared channel (PUSCH) in each subframe. Without SPS, every DL or UL physical resource block (PRB) allocation must be granted via an access grant message on the PDCCH. This is sufficient for most bursty best effort types of applications which generally have large packet sizes and thus typically only a few users must be scheduled each subframe. However, for applications that require persistent allocations of small packets (i.e. VoIP), the access grant control channel overhead can be greatly reduced with SPS.

SPS therefore introduces a persistent PRB allocation that a user should expect on the DL or can transmit on the UL. There are many different ways in which SPS can setup persistent allocations, and Figure below shows one way appropriate for VoLTE. Note that speech codecs typically generate a speech packet every 20 ms. In LTE, the HARQ interlace time is 8 ms which means retransmissions of PRBs that have failed to be decoded can occur every 8 ms. Figure below shows an example where a maximum of five total transmissions (initial transmission plus four retransmissions) is assumed for each 20 ms speech packet with two parallel HARQ processes. This figure clearly shows that every 20 ms a new “first transmission” of a new speech packet is sent. This example does require an additional 20 ms of buffering in the receiver to allow for four retransmissions, but this is generally viewed as a good tradeoff to maximize capacity/coverage (compared to only sending a maximum of two retransmissions).

The example in Figure above can be applied to both the DL and UL and note that as long as there are speech packets arriving (i.e. a talk spurt) at the transmitter, the SPS PRBs would be dedicated to the user. Once speech packets stop arriving (i.e. silence period), these PRB resources can be re-assigned to other users. When the user begins talking again, a new SPS set of PRBs would be assigned for the duration of the new talkspurt. Note that dynamic scheduling of best effort data can occur on top of SPS, but the SPS allocations would take precedent over any scheduling conflicts.

TTI bundling is another feature in Rel-8 that optimizes the UL coverage for VoLTE. LTE defined 1 ms subframes as the Transmission Time Interval (TTI) which means scheduling occurs every 1 ms. Small TTIs are good for reducing round trip latency, but do introduce challenges for UL VoIP coverage. This is because on the UL, the maximum coverage is realized when a user sends a single PRB spanning 180 kHz of tones. By using a single 180 kHz wide PRB on the UL, the user transmit power/Hz is maximized. This is critical on the UL since the user transmit power is limited, so maximizing the power/Hz improves coverage. The issue is that since the HARQ interlace time is 8 ms, the subframe utilization is very low (1/8). In other words, 7/8 of the time the user is not transmitting. Therefore, users in poor coverage areas could be transmitting more power when a concept termed TTI bundling (explained in the next paragraph) is deployed.

While it’s true that one fix to the problem is to just initiate several parallel HARQ processes to fill in more of the 7/8 idle time, this approach adds significant IP overhead since each HARQ process requires its own IP header. Therefore, TTI bundling was introduced in Rel-8 which combined four subframes spanning 4 ms. This allowed for a single IP header over a bundled 4 ms TTI that greatly improved the subframe utilization (from 1/8 to 1/2) and thus the coverage (by more than 3 dB).

Martin Sauter puts it in a simpler way in his blog as follows: The purpose of TTI Bundling is to improve cell edge coverage and in-house reception for voice. When the base station detects that the mobile can't increase it's transmission power and reception is getting worse it can instruct the device to activate TTI bundling and send the same packet but with different error detection and correction bits in 2, 3 or even 4 consecutive transmit time intervals. The advantage over sending the packet in a single TTI and then detecting that it wasn't received correctly which in turn would lead to one or more retransmissions is that it saves a lot of signaling overhead. Latency is also reduced as no waiting time is required between the retransmissions. In case the bundle is not received correctly, it is repeated in the same way as an ordinary transmission of a packet. Holma and Toskala anticipate a 4dB cell edge gain for VoIP with this feature which is quite a lot. For details how the feature is implemented have a look at 3GPP TS 36.321.

A whitepaper explaining the concepts of TTI Bundling is available on Slideshare here.

'EU-Alert' in Release-11

In the recently concluded 3GPP CT-50 in Istanbul, EU-Alert was adopted as part of Rel-11. The EU-Alert is introduced under Public Warning System (PWS) in parallel with Earthquake and Tsunami Warning System (ETWS).

PWS was introduced in Rel-9 and I blogged about it here. ETWS has been around since Rel-8 and was blogged here.

In fact EU-Alert is sent as part of the Cell Broadcast Message (CBS) using new identifiers. For more details see 3GPP TS 23.401.

The following is an old video from CHORIST project, which was instrumental in providing details of working of this EU-Alert system.

Also Read: Commercial Mobile Alert System (CMAS) here.

Dilbert Humour: Why your software contains bugs

Source: http://www.dilbert.com

4G Mobile Broadband Evolution: 3GPP Release-10 and Beyond

New Report from 4G Americas:

4G Mobile Broadband Evolution: 3GPP Release 10 and Beyond - HSPA+ SAE/LTE and LTE-Advanced provides detailed discussions of Release 10, including the significant new technology enhancements to LTE/EPC (called LTE-Advanced) that were determined in October 2010 to have successfully met all of the criteria established by the International Telecommunication Union Radiotelecommunication Sector (ITU-R) for the first release of IMT-Advanced. IMT-Advanced, which includes LTE-Advanced, provides a global platform on which to build next generations of interactive mobile services that will provide faster data access, enhanced roaming capabilities, unified messaging and broadband multimedia. The paper also provides detailed information on the introduction of LTE-Advanced and the planning for Release 11 and beyond. Release 10 is expected to be finalized in March 2011, while work on Release 11 will continue through the fourth quarter of 2012.

White paper embedded below and is available to view and download from the 3G4G website.

4G Mobile Broadband Evolution: 3GPP Release-10 and Beyond

View more documents from Zahid Ghadialy.

Making small purchases simpler with Ericsson IPX

Yesterday a colleague made me aware of this Ericsson's IPX SMS based payment system that looks like a competitor to the NFC technology and doesn't involve any additional chip/hardware. Here is a video:

From Ericsson's website:

Ericsson Internet Payment Exchange (IPX) is a leading mobile aggregator, providing delivery and billing services, via SMS, MMS, web and online mobile billing, to more than 2 billion mobile subscribers across 26 countries. Ericsson IPX also brokers location information in selected countries and Ericsson IPX Messaging provides reach to 96% of all mobile subscribers worldwide with SMS. Ericsson IPX customers are companies who offer digital content, mobile voting & directory information and enterprises offering mobile marketing, communities and banking.

Now, we all love SMS and we have to admit that its the simplest of technology and even the most primitive phone nowadays support it but there could be scenarios when this can be a bit of a problem:

1. SMS can sometimes be delayed if a particular cell is overloaded, etc. So how long do we have to stand in front of the machine?

2. If say for 2-3 mins we do not receive an indication that the machine has a cash, do we send another SMS to cancel the transaction?

3. If we have a problem, do we have a support number to call to? How much will that cost?

4. If there is a queue of people and someone else wants to purchase something as well, does the next person has to wait till the person before has received the item?

5. If two people have sent an SMS, how do they know whose cash is in the machine now? Do we start putting a Pin as well ?

I agree, this technology could be really useful if you have run out of cash (even if you have NFC chip) and you need to purchase something small.

The other obvious advantage is that you can target advertisement at regular users who are at a particular place at a particular time to make them buy something. Also you can get statistics like what time people tend to purchase, what do they purchase, where, etc.

Anyway, hard for me to see this take off big time.

6th ETSI Security Workshop

6th ETSI Security workshop was held last month. There were some very interesting areas of discussion including Wireless/Mobile Security, Smart Grids Security, etc.

Security in 3GPP

View more presentations from Zahid Ghadialy

Embedded SIMs and M2M Communications

View more presentations from Zahid Ghadialy

All presentations are available to download from here.