Sunday 25 August 2013

Centralized SON


I was going through the presentation by SKT that I blogged about here and came across this slide above. SKT is clearly promoting the benefits of their C-SON (centralized SON) here.


The old 4G Americas whitepaper (here) explained the differences between the three approaches; Centralized (C-SON), Distributed (D-SON) and Hybrid (H-SON). An extract from that paper here:

In a centralized architecture, SON algorithms for one or more use cases reside on the Element Management System (EMS) or a separate SON server that manages the eNB's. The output of the SON algorithms namely, the values of specific parameters, are then passed to the eNB's either on a periodic basis or when needed. A centralized approach allows for more manageable implementation of the SON algorithms. It allows for use case interactions between SON algorithms to be considered before modifying SON parameters. However, active updates to the use case parameters are delayed since KPIs and UE measurement information must be forwarded to a centralized location for processing. Filtered and condensed information are passed from the eNB to the centralized SON server to preserve the scalability of the solution in terms of the volume of information transported. Less information is available at the SON server compared to that which would be available at the eNB. Higher latency due to the time taken to collect UE information restricts the applicability of a purely centralized SON architecture to those algorithms that require slower response time. Furthermore, since the centralized SON server presents a single point of failure, an outage in the centralized server or backhaul could result in stale and outdated parameters being used at the eNB due to likely less frequent updates of SON parameters at the eNB compared to that is possible in a distributed solution.

In a distributed approach, SON algorithms reside within the eNB’s, thus allowing autonomous decision making at the eNB's based on UE measurements received on the eNB's and additional information from other eNB's being received via the X2 interface. A distributed architecture allows for ease of deployment in multi-vendor networks and optimization on faster time scales. Optimization could be done for different times of the day. However, due to the inability to ensure standard and identical implementation of algorithms in a multi-vendor network, careful monitoring of KPIs is needed to minimize potential network instabilities and ensure overall optimal operation.

In practical deployments, these architecture alternatives are not mutually exclusive and could coexist for different purposes, as is realized in a hybrid SON approach. In a hybrid approach, part of a given SON optimization algorithm are executed in the NMS while another part of the same SON algorithm could be executed in the eNB. For example, the values of the initial parameters could be done in a centralized server and updates and refinement to those parameters in response to the actual UE measurements could be done on the eNB's. Each implementation has its own advantages and disadvantages. The choice of centralized, distributed or hybrid architecture needs to be decided on a use-case by use case basis depending on the information availability, processing and speed of response requirements of that use case. In the case of a hybrid or centralized solution, a practical deployment would require specific partnership between the infrastructure vendor, the operator and possibly a third party tool company. Operators can choose the most suitable approach depending upon the current infrastructure deployment.

Finally, Celcite CMO recently recently gave an interview on this topic on Thinksmallcell here. An extract below:

SON software tunes and optimises mobile network performance by setting configuration parameters in cellsites (both large and small), such as the maximum RF power levels, neighbour lists and frequency allocation. In some cases, even the antenna tilt angles are updated to adjust the coverage of individual cells.

Centralised SON (C-SON) software co-ordinates all the small and macrocells, across multiple radio technologies and multiple vendors in a geographic region - autonomously updating parameters via closed loop algorithms. Changes can be as frequent as every 15 minutes– this is partly limited by the bottlenecks of how rapidly measurement data is reported by RAN equipment and also the capacity to handle large numbers of parameter changes. Different RAN vendor equipment is driven from the same SON software. A variety of data feeds from the live network are continuously monitored and used to update system performance, allowing it to adapt automatically to changes throughout the day including outages, population movement and changes in services being used.

Distributed SON (D-SON) software is autonomous within each small cell (or macrocell) determining for itself the RF power level, neighbour lists etc. based on signals it can detect itself (RF sniffing) or by communicating directly with other small cells.

LTE has many SON features already designed in from the outset, with the X.2 interface specifically used to co-ordinate between small and macrocell layers whereas 3G lacks SON standards and requires proprietary solutions.
C-SON software is available from a relatively small number of mostly independent software vendors, while D-SON is built-in to each small cell or macro node provided by the vendor. Both C-SON and D-SON will be needed if network operators are to roll out substantial numbers of small cells quickly and efficiently, especially when more tightly integrated into the network with residential femtocells.

Celcite is one of the handful of C-SON software solution vendors. Founded some 10 years ago, it has grown organically by 35% annually to 450 employees. With major customers in both North and South America, the company is expanding from 3G UMTS SON technology and is actively running trials with LTE C-SON.

Quite a few companies are claiming to be in the SON space, but Celcite would argue that there are perhaps only half a dozen with the capabilities for credible C-SON solutions today. Few companies can point to live deployments. As with most software systems, 90% of the issues arise when something goes wrong and it's those "corner cases" which take time to learn about and deal with from real-world deployment experience.

A major concern is termed "Runaway SON" where the system goes out of control and causes tremendous negative impact on the network. It's important to understand when to trigger SON command and when not to. This ability to orchestrate and issue configuration commands is critical for a safe, secure and effective solution.

Let me know your opinions via comments below.

8 comments:

Zahid Ghadialy said...

I noticed another post by SKT on SON in HetNets here

Ravi Sinha (Via Het Net group on Linkedin) said...

Zahid, Thanks a lot for this post, and as usual KT is the leader in terms of LTE-A deployment. I am still curious to know how much is really deployed out of the features claimed here. I still see a lack of visibility for ANR and eICIC in terms of deployment. If it is really deployed who is the vendor for them and did they use a proprietary way to implement them or are deployed with very limited functionality and what is the standard they are using to evaluate the performance of the SoN network, are they going as per the LSTI recommendations?

Manoj Das (via Het Net group on Linkedin) said...

IMHO from the architecture shown in KT's presentation, I observed, KT developed their own SON to inter-work with Macro SON and small cell SON. Thats the best part of their efforts. We will see similar efforts in the western world soon.

Ravi Sinha (Via Het Net group on Linkedin) said...

This is the best part of it. I remember when they were doing trial with some of the small cell vendors, they have taken the shrink wrap solution and then optimized the stacks on their own (Radio Resource Manager, OAM and EMS).

Zoran Kehler (Via Het Net group on Linkedin) said...

Any thoughts on doing the same for 3G, or controlling both?

Ravi Sinha (Via Het Net group on Linkedin) said...

I think lots of vendors are also trying to deploy SON with 3G NW. Basically even when you look for remote Radio Head/Antenna (Active Array) and centralized Baseband pooling in case of LTE -A , same thing you can do with 3G when the Front Haul is available matching the requirements, but the question is , is there any driving force to this, probably I do see it in case of LTE, but haven't heard a lot for 3G. Hybrid DAS (Distributed eNB architecture) is the perfect environment for centralized SON deployment and one day probably 3G will have to match it, since LTE and HSPA+ and WiFi will have to go together in a multi technology small cell.

Zoran Kehler (Via Het Net group on Linkedin) said...

@Ravi do you have insight into which NEMs may have SON for their 3G network? I believe Ericsson is selling ex-Optimi's products, but I am not sure about NSN, Huawei, ALU and ZTE.

Ravi Sinha (Via Het Net group on Linkedin) said...

Most of them are having other small SoN vendors working and customizing their platform. At least for Cisco, Intucell is SoN platform provider, but since they have bought intucell, they will come up with an integrated SoN platform.