Bluetooth 5 for IoT

Bluetooth 5 (not 5.0 - to simplify marketing messages and communication) was released last year. The main features being 2x Faster, 4x Range (Bluetooth 4 - 50m outdoors, 10m Indoors; Bluetooth 5 - 200m outdoors, 40m indoors) & 8x Data.

I like this above slide by Robin Heydon, Qualcomm from a presentation he gave in CW (Cambridge Wireless) earlier this year. What is highlights is that Bluetooth 5 is Low Energy (LE) like its predecessor 4.0.For anyone interested, a good comparison of 5 vs 4.2 is available here.

In addition, Mesh support is now available for Bluetooth. I assume that this will work with Bluetooth 4.0 onwards but it would probably only make sense from Bluetooth 5 due to support for reasonable range.

The Bluetooth blog has a few posts on Mesh (see here, here and here). I like this simple introductory video below.


This recent article by Geoff Varral on RTT says the following (picture from another source):

Long distance Bluetooth can also be extended with the newly supported mesh protocol.

This brings Bluetooth into direct competition with a number of other radio systems including 802.15,4 based protocols such as Zigbee, LoRa, Wireless-M (for meter reading), Thread and 6 LowPAN (IPV6 over local area networks. 802.11 also has a mesh protocol and long distance ambitions including 802.11ah Wi-Fi in the 900 MHz ISM band. It also moves Bluetooth into the application space targeted by LTE NB IOT and LTE M though with range limitations.

There are some interesting design challenges implied by 5.0. The BLE specification is inherently less resilient to interference than Classic or EDR Bluetooth. This is because the legacy seventy eight X 1 MHz channels within the 20 MHz 2.4 GHz pass band are replaced with thirty nine two MHz channels with three fixed non hopping advertising channels in the middle and edge of the pass band.

These have to withstand high power 20 MHz LTE TDD in Band 40 (below the 2.4 GHz pass band) and high power 20 MHz LTE TDD in band 41 above the pass band (and Band 7 LTE FDD). This includes 26 dBm high power user equipment.

The coexistence of Bluetooth, Wi-Fi and LTE has been intensively studied and worked on for over ten years and is now managed with surprising effectiveness within a smart phone through a combination of optimised analogue and digital filtering (SAW and FBAR filters) and time domain interference mitigation based on a set of  industry standard wireless coexistence protocols.

The introduction of high power Bluetooth however implies that this is no longer just a colocation issue but potentially a close location issue. Even managing Bluetooth to Bluetooth coexistence becomes a non-trivial task when you consider that +20 dBm transmissions will be closely proximate to -20 dBm or whisper mode -30 dBm transmissions and RX sensitivity of -93 dBm, potentially a dynamic range of 120dB. Though Bluetooth is a TDD system this isolation requirement will be challenging and vulnerable to ISI distortion. 

More broadly there is a need to consider how ‘5G Bluetooth’ couples technically and commercially with 5G including 5G IOT

Ericsson has a whitepaper on Bluetooth Mesh Networking. The conclusion of that agrees that Bluetooth may become a relevant player in IoT:

Bluetooth mesh is a scalable, short-range IoT technology that provides flexible and robust performance. The Bluetooth Mesh Profile is an essential addition to the Bluetooth ecosystem that enhances the applicability of Bluetooth technology to a wide range of new IoT use cases. Considering the large Bluetooth footprint, it has the potential to be quickly adopted by the market. 

With proper deployment and configuration of relevant parameters of the protocol stack, Bluetooth mesh is able to support the operation of dense networks with thousands of devices. The building automation use case presented in this white paper shows that Bluetooth mesh can live up to high expectations and provide the necessary robustness and service ratio. Furthermore, the network design of Bluetooth mesh is flexible enough to handle the introduction of managed operations on top of flooding, to further optimize behavior and automate the relay selection process.

Moreover, another Ericsson article says that "smartphones with built-in Bluetooth support can be part of the mesh, may be used to configure devices and act as capillary gateways."

A capillary network is a LAN that uses short-range radio-access technologies to provide groups of devices with wide area connectivity. Capillary networks therefore extend the range of the wide area mobile networks to constraint devices. Figure above illustrates the Bluetooth capillary gateway concept.

Once there are enough smartphones and Bluetooth devices with Bluetooth 5 and Mesh support, It would be interesting to see how developers use it. Would also be interesting to see if it will start encroaching LoRa and Sigfox markets as well.

5G: Architecture, QoS, gNB, Specifications - April 2017 Update

The 5G NR (New Radio) plan was finalised in March (3GPP press release) and as a result Non-StandAlone (NSA) 5G NR will be finalised by March 2018. The final 3GPP Release-15 will nevertheless include NR StandAlone (SA) mode as well.

NSA is based on Option 3 (proposed by DT). If you dont know much about this, then I suggest listening to Andy Sutton's lecture here.

3GPP TR 38.804: Technical Specification Group Radio Access Network; Study on New Radio Access Technology; Radio Interface Protocol Aspects provides the overall architecture as shown above

Compared to LTE the big differences are:

• Core network control plane split into AMF and SMF nodes (Access and Session Management Functions). A given device is assigned a single AMF to handle mobility and AAA roles but can then have multiple SMF each dedicated to a given network slice
• Core network user plane handled by single node UPF (User Plane Function) with support for multiple UPF serving the same device and hence we avoid need for a common SGW used in LTE. UPF nodes may be daisy chained to offer local breakout and may have parallel nodes serving the same APN to assist seamless mobility.

Hat tip Alistair Urie.

Notice that like eNodeB (eNB) in case of LTE, the new radio access network is called gNodeB (gNB). Martin Sauter points out in his excellent blog that 'g' stands for next generation.

3GPP TS 23.501: Technical Specification Group Services and System Aspects; System Architecture for the 5G System; Stage 2 provides architecture model and concepts including roaming and non-roaming architecture. I will probably have to revisit as its got so much information. The QoS table is shown above. You will notice the terms QFI (QoS Flow Identity) & 5QI (5G QoS Indicator). I have a feeling that there will be a lot of new additions, especially due to URLLC.

Finally, here are the specifications (hat tip Eiko Seidel for his excellent Linkedin posts - references below):
5G NR will use 38 series (like 25 series for 3G & 36 series for 4G).

RAN3 TR 38.801 v2.0.0 on Study on New Radio Access Technology; Radio Access Architecture and Interfaces

RAN1 TR 38.802 v2.0.0 on Study on New Radio (NR) Access Technology; Physical Layer Aspects

RAN4 TR 38.803 v2.0.0 on Study on New Radio Access Technology: RF and co-existence aspects

RAN2 TR 38.804 v1.0.0 on Study on New Radio Access Technology; Radio Interface Protocol Aspects

38.201 TS Physical layer; General description
38.211 TS Physical channels and modulation
38.212 TS Multiplexing and channel coding
38.213 TS Physical layer procedures
38.214 TS Physical layer measurements
38.21X TS Physical layer services provided to upper layer
38.300 TS Overall description; Stage-2
38.304 TS User Equipment (UE) procedures in idle mode
38.306 TS User Equipment (UE) radio access capabilities
38.321 TS Medium Access Control (MAC) protocol specification
38.322 TS Radio Link Control (RLC) protocol specification
38.323 TS Packet Data Convergence Protocol (PDCP) specification
38.331 TS Radio Resource Control (RRC); Protocol specification
37.3XX TS [TBD for new QoS]
37.3XX TS Multi-Connectivity; Overall description; Stage-2
38.401 TS Architecture description
38.410 TS NG general aspects and principles
38.411 TS NG layer 1
38.412 TS NG signalling transport
38.413 TS NG Application Protocol (NGAP)
38.414 TS NG data transport
38.420 TS Xn general aspects and principles
38.421 TS Xn layer 1
38.422 TS Xn signalling transport
38.423 TS Xn Application Protocol (XnAP)
38.424 TS Xn data transport
38.425 TS Xn interface user plane protocol
38.101 TS User Equipment (UE) radio transmission and reception
38.133 TS Requirements for support of radio resource management
38.104 TS Base Station (BS) radio transmission and reception
38.307 TS Requirements on User Equipments (UEs) supporting a release-independent frequency band
38.113 TS Base Station (BS) and repeater ElectroMagnetic Compatibility (EMC)
38.124 TS Electromagnetic compatibility (EMC) requirements for mobile terminals and ancillary equipment
38.101 TS User Equipment (UE) radio transmission and reception
38.133 TS Requirements for support of radio resource management
38.104 TS Base Station (BS) radio transmission and reception
38.141 TS Base Station (BS) conformance testing

Note that all specifications are not in place yet. Use this link to navigate 3GPP specs: http://www.3gpp.org/ftp/Specs/archive/38_series/

Further reading:

• 3GPP 5G Specifications - Jan 2018 update
• Qualcomm: 3GPP agrees on plan to accelerate 5G NR – the global 5G standard – for 2019 deployments
• 3GPP 5G Study completed by RAN --- Let's look at the Technical Reports
• Structure of the 3GPP NR (5G) Specification

Gigabit LTE?

Last year Qualcomm announced the X16 LTE modem that was capable of up to 1Gbps, category 16 in DL and Cat 13 (150 Mbps) in UL. See my last post on UE categories here.

Early January, it announced Snapdragon 835 at CES that looks impressive. Android central says "On the connectivity side of things, there's the Snapdragon X16 LTE modem, which enables Category 16 LTE download speeds that go up to one gigabit per second. For uploads, there's a Category 13 modem that lets you upload at 150MB/sec. For Wi-Fi, Qualcomm is offering an integrated 2x2 802.11ac Wave-2 solution along with an 802.11ad multi-gigabit Wi-Fi module that tops out at 4.6Gb/sec. The 835 will consume up to 60% less power while on Wi-Fi."

Technology purists would know that LTE, which is widely referred to as 4G, was in fact pre-4G or as some preferred to call it, 3.9G. New UE categories were introduced in Rel-10 to make LTE into LTE-Advanced with top speeds of 3Gbps. This way, the ITU requirements for a technology to be considered 4G (IMT-Advanced) was satisfied.

LTE-A was already Gigabit capable in theory but in practice we had been seeing peak speeds of up to 600Mbps until recently. With this off my chest, lets look at what announcements are being made. Before that, you may want to revisit what 4.5G or LTE-Advanced Pro is here.

• Qualcomm, Telstra, Ericsson and NETGEAR Announce World’s First Gigabit Class LTE Mobile Device and Gigabit-Ready Network. Gigabit Class LTE download speeds are achieved through a combination of 3x carrier aggregation, 4x4 MIMO on two aggregated carriers plus 2x2 MIMO on the third carrier, and 256-QAM higher order modulation. 
• TIM in Italy is the first in Europe to launch 4.5G up to 500 Mbps in Rome, Palermo and Sanremo
• Telenet in partnership with ZTE have achieved a download speed of 1.3 Gbps during a demonstration of the ZTE 4.5G new technology. That's four times faster than 4G's maximum download speed. Telenet is the first in Europe to reach this speed in real-life circumstances. 4.5G ZTE technology uses 4x4 MIMO beaming, 3-carrier aggregation, and a QAM 256 modulation.
• AT&T said, "The continued deployment of our 4G LTE-Advanced network remains essential to laying the foundation for our evolution to 5G. In fact, we expect to begin reaching peak theoretical speeds of up to 1 Gbps at some cell sites in 2017. We will continue to densify our wireless network this year through the deployment of small cells and the use of technologies like carrier aggregation, which increases peak data speeds. We’re currently deploying three-way carrier aggregation in select areas, and plan to introduce four-way carrier aggregation as well as LTE-License Assisted Access (LAA) this year."
• T-Mobile USA nearly reached a Gigabit and here is what they say, "we reached nearly 1 Gbps (979 Mbps) on our LTE network in our lab thanks to a combination of three carrier aggregation, 4x4 MIMO and 256 QAM (and an un-released handset)."
• The other US operator Sprint expects to unveil some of its work with 256-QAM and massive MIMO on Sprint’s licensed spectrum that pushes the 1 gbps speed boundary. It’s unclear whether this will include an actual deployment of the technology

So we are going to see a lot of higher speed LTE this year and yes we can call it Gigabit LTE but lets not forget that the criteria for a technology to be real '4G' was that it should be able to do 1Gbps in both DL and UL. Sadly, the UL part is still not going Gigabit anytime soon.

Verizon's 5G Standard

Earlier this year I wrote a Linkedin post on how operators are setting a timetable for 5G (5G: Mine is bigger than yours) and recently Dean Bubley of Disruptive Analysis wrote a similar kind of post also on Linkedin with a bit more detail (5G: Industry Politics, Use-Cases & a Realistic Timeline)

Some of you may be unaware that the US operator Verizon has formed 'Verizon 5G Technology Forum' (V5GTF) with the intention of developing the first set of standards that can also influence the direction of 3GPP standardization and also provide an early mover advantage to itself and its partners.

The following from Light Reading news summarizes the situation well:

Verizon has posted its second round of work with its partners on a 5G specification. The first round was around the 5G radio specification; this time the work has been on the mechanics of connecting to the network. The operator has been working on the specification with Cisco Systems Inc., Ericsson AB, Intel Corp., LG Electronics Inc., Nokia Corp., Qualcomm Inc. and Samsung Corp. via the 5G Technology Forum (V5GTF) it formed late in 2015.

Sanyogita Shamsunder, director of strategy at Verizon, says that the specification is "75% to 80% there" at least for a "fixed wireless use case." Verizon is aiming for a "friendly, pre-commercial launch" of a fixed wireless pilot in 2017, Koeppe notes.

Before we go further, lets see this excellent video by R&S wherein Andreas Roessler explains what Verizon is up to:



Verizon and SKT are both trying to be the 5G leaders and trying to roll out a pre-standard 5G whenever they can. In fact Qualcomm recently released a 28 GHz modem that will be used in separate pre-standard 5G cellular trials by Verizon and Korea Telecom

Introducing #Snapdragon X50, our first #5G modem. https://t.co/MBmAS86WaH pic.twitter.com/ewOdm4OVzE

— Qualcomm (@Qualcomm) October 18, 2016

Quoting from the EE times article:

The Snapdragon X50 delivers 5 Gbits/second downlinks and multiple gigabit uplinks for mobile and fixed-wireless networks. It uses a separate LTE connection as an anchor for control signals while the 28 GHz link delivers the higher data rates over distances of tens to hundreds of meters.

The X50 uses eight 100 MHz channels, a 2x2 MIMO antenna array, adaptive beamforming techniques and 64 QAM to achieve a 90 dB link budget. It works in conjunction with Qualcomm’s SDR05x mmWave transceiver and PMX50 power management chip. So far, Qualcomm is not revealing more details of modem that will sample next year and be in production before June 2018.

Verizon and Korea Telecom will use the chips in separate trials starting late next year, anticipating commercial services in 2018. The new chips mark a departure from prototypes not intended as products that Qualcomm Research announced in June.

Korea Telecom plans a mobile 5G offering at the February 2018 Winter Olympics. Verizon plans to launch in 2018 a less ambitious fixed-wireless service in the U.S. based on a specification it released in July. KT and Verizon are among a quartet of carriers that formed a group in February to share results of early 5G trials.

For its part, the 3GPP standards group is also stepping up the pace of the 5G standards efforts it officially started earlier this year. It endorsed last month a proposal to consider moving the date for finishing Phase I, an initial version of 5G anchored to LTE, from June 2018 to as early as December 2017, according to a recent Qualcomm blog.

Coming back to Verizon's 5G standard, is it good enough and compatible with 3GPP standards? The answer right now seems to be NO.

The following is from Rethink Wireless:

The issue is that Verizon’s specs include a subcarrier spacing value of 75 kHz, whereas the 3GPP has laid out guidelines that subcarrier spacing must increase by 30 kHz at a time, according to research from Signals Research Group. This means that different networks can work in synergy if required without interfering with each other.

Verizon’s 5G specs do stick to 3GPP requirements in that it includes MIMO and millimeter wave (mmWave). MmWave is a technology that both AT&T and Verizon are leading the way in – which could succeed in establishing spectrum which is licensed fairly traditionally as the core of the US’s high frequency build outs.

A Verizon-fronted group recently rejected a proposal from AT&T to push the 3GPP into finalizing an initial 5G standard for late 2017, thus returning to the original proposed time of June 2018. Verizon was supported by Samsung, ZTE, Deutsche Telecom, France Telecom, TIM and others, which were concerned the split would defocus SA and New Radio efforts and even delay those standards being finalized.

Verizon has been openly criticized in the industry, mostly by AT&T (unsurprisingly), as its hastiness may lead to fragmentation – yet it still looks likely to beat AT&T to be the first operator to deploy 5G, if only for fixed access.

Verizon probably wants the industry to believe that it was prepared for eventualities such as this – prior to the study from Signal Research Group, the operator said its pre-standard implementation will be close enough to the standard that it could easily achieve full compatibility with simple alterations. However, Signals Research Group’s president Michael Thelander has been working with the 3GPP since the 5G standard was birthed, and he begs to differ.

Thelander told FierceWireless, “I believe what Verizon is doing is not hardware-upgradeable to the real specification. It’s great to be trialing, even if you define your own spec, just to kind of get out there and play around with things. That’s great and wonderful and hats off to them. But when you oversell it and call it 5G and talk about commercial services, it’s not 5G. It’s really its own spec that has nothing to do with Release 16, which is still three years away. Just because you have something that operates in millimeter wave spectrum and uses Massive MIMO and OFDM, that doesn’t make it a 5G solution.”

Back in the 3G days, NTT Docomo was the leader in standards and it didn't have enough patience to wait for 3GPP standards to complete. As a result it released its first 3G network called FOMA (Freedom of Mobile Access) based on pre-standard version of specs. This resulted in handset manufacturers having to tweak their software to cope with this version and it suffered from economy of scale. Early version of 3G phones were also not able to roam on the Docomo network. In a way, Verizon is going down the same path.

While there can be some good learning as a result of this pre-5G standard, it may be a good idea not to get too tied into it. A standard that is not compliant will not achieve the required economy of scale, either with handsets or with dongles and other hotspot devices.


Related posts:

• AT&T's 5G Trials
• 5G New Radio (NR), Architecture options and migration from LTE
• Some more thoughts on 5G
• 3GPP Release-14 & Release-15 update

5G New Radio (NR), Architecture options and migration from LTE

You have probably read about the demanding requirements for 5G in many of my blog posts. To meet these demanding requirements a 'next-generation radio' or 'new radio' (NR) will be introduced in time for 5G. We dont know as of yet what air interface, modulation technology, number of antennas, etc. for this NR but this slide above from Qualcomm gives an idea of what technologies will be required for this 5G NR.

The slide above gives a list of design innovations that will be required across diverse services as envisioned by 5G proponents.

It should be mentioned that Rel-10/11/12 version of LTE is referred to as LTE-Advanced and Rel-13/14 is being referred to as LTE-A Pro. Rel-15 will probably have a new name but in various discussions its being referred to as eLTE.

When first phase of 5G arrives in Rel-15, eLTE would be used for access network and EPC will still be used for core network. 5G will use NR and eventually get a new core network, probably in time for phase 2. This is often referred to as next generation core network (NGCN).

The slides below from Deutsche Telekom show their vision of how operators should migrate from eLTE to 5G.

The slides below from AT&T show their vision of LTE to 5G migration.

Eiko Seidel posted the following in 3GPP 5G standards group (i recommend you join if you want to follow technical discussions)


Summary RAN1#86 on New Radio (5G) Gothenburg, Sweden

At this meeting RAN1 delegates presented and discussed numerous evaluation results mainly in the areas of waveforms and channel coding.

Nonetheless RAN1 was not yet prepared to take many technical decisions. Most agreements are still rather general. 

First NR terminology has been defined. For describing time structures mini-slots have been introduced: a mini-slot is the smallest possible scheduling unit and smaller than a slot or a subframe.

Discussions on waveforms favored filtered and windowed OFDM. Channel coding discussions were in favor of LDPC and Turbo codes. But no decisions have been made yet.

Not having taken many decisions at this meeting, RAN1 now is behind its schedule for New Radio.
Hopefully the lag can be made up at two additional NR specific ad hoc meetings that have been scheduled for January and June 2017.

(thanks to my colleague and friend Dr. Frank Kowalewski for writing this short summary!)

Yet another post from Eiko on 3GPP RAN 3 on related topic.

The RAN3 schedule is that in February 2017 recommendations can be made for a protocol architecture.  In the meeting arguments came up by some parties that the work plan is mainly addressing U-Plane architecture and that split of C- and U-plane is not considered sufficiently. The background is that the first step will be dual connectivity with LTE using LTE RRC as control plane and some companies would like to concentrate on this initially. It looks like that a prioritization of features might happen in November timeframe. Beside UP and CP split, also the functional split between the central RAN node and the distributed RAN node is taking place for the cloud RAN fronthaul interface. Besides this, also discussion on the fronthaul interface takes place and it will be interesting to see if RAN3 will take the initiative to standardize a CPRI like interface for 5G. Basically on each of the three interfaces controversial discussion is ongoing.

Yet another basic question is, what is actually considered as a “New 5G RAN”? Is this term limited to a 5G eNB connected to the NG core? Or can it also be also an eLTE eNB with Dual Connectivity to 5G? Must this eLTE eNB be connected to the 5G core or is it already a 5G RAN when connected to the EPC? 

Finally, a slide from Qualcomm on 5G NR standardization & launch.

Updates from the 3GPP RAN 5G Workshop - Part 2

I have finally got round to having a look at some more presentations on 5G from the recently concluded 3GPP RAN 5G Workshop. Part 1 of the series is here.

Panasonic introduced this concept of Sub-RAT's and Cradle-RAT's. I think it should be obvious from the picture above what they mean but you can refer to their presentation here for more details.

Ericsson has provided a very detailed presentation (but I assume a lot of slides are backup slides, only for reference). They have introduced what they call as "NX" (No compatibility constraints). This is in line to what other vendors have referred to as well that above 6GHz, for efficiency, new frame structures and waveforms would serve best. Their slides are here.



Nokia's proposal is that in the phase 1 of 5G, the 5G Access point (or 5G NodeB) would connect to the 4G Evolved Packet Core (EPC). In phase 2, both the LTE and the 5G (e)NodeB's would connect to the 5G core. Their presentation is available here.

Before we move on to the next one, I should mention that I am aware of some research that is underway, mostly by universities where they are exploring an architecture without a centralised core. The core network functionality would be distributed and some of the important data would be cached on the edge. There will be challenges to solve regarding handovers and roaming; also privacy and security issues in the latter case.

I quite like the presentation by GM research about 5G in connected cars. They make a very valid point that "Smartphones and Vehicles are similar but not the same. The presentation is embedded below.

Qualcomm presented a very technical presentation as always, highlighting that they are thinking about various future scenarios. The picture above, about phasing is in a way similar to the Ericsson picture. It also highlights what we saw in part 1, that mmW will arrive after WRC-19, in R16. Full presentation here.

The final presentation we are looking is by Mitsubishi. Their focus is on Massive MIMO which may become a necessity at higher frequencies. As the frequency goes higher, the coverage goes down. To increase the coverage area, beamforming can be used. The more the antennas, the more focused the beam could be. They have also proposed the use of SC-FDMA in DL. Their presentation is here and also embedded below.

MCPTT Off-network and UE to UE/Network Relays

3GPP SA6 recently held a workshop on Mission Critical Push To Talk (MCPTT) stage 3 development in Canada. You can look at the meeting report here and download any presentations from here.

An interesting presentation that caught my attention was one on "MCPTT Off-network Architecture". The presentation is embedded below where it is described technically what is meant by Off-network. From my understanding an off-network from MCPTT point of view is one where the UE does not have network coverage.

In such a situation a UE can connect to another UE that can connect to UE/network (if available) to relay the message. Its similar to another technology that I have talked about, Multihop Cellular Networks and ODMA. Anyway, here is the presentation:

Sometimes the standards can take too long to develop a feature and apps can come and deliver a similar service at a very short notice. One such App that does something similar is called Firechat, which played a big role in many protests worldwide. The video explaining it below is worth watching.


The problem with Apps is that they cannot be used by the emergency services or other governmental organisations, unless a standard feature is available. This is the expectation from this Off-network relays. It would work in combination with D2D/ProSe.


For anyone interested in the latest Public Safety (PS), here is a presentation by SA6 chairman from July

New LTE UE Categories: 11, 12, 13 and 14 in 3GPP Rel-12

While checking 3GPP TS 36.306, I noticed some new LTE categories have been defined. We now have all the way up to category 14. I also noticed that Wikipedia page has up to Category 15, not sure how/where they got it from. 

The LG Space page has some more details for anyone interested in exploring further.

A Qualcomm demo from MWC for LTE Category 11, if interested.



Finally, other related posts:

• LTE Category-0 low power M2M devices 
• New LTE-A UE Category 9 and 10 in Rel-11
• LTE-Advanced (Rel-10) UE Categories
• 1200Mbps DL with LTE-Advanced

LTE-Hetnet (LTE-H) a.k.a. LTE Wi-Fi Link Aggregation (LWA)

We have talked about the unlicensed LTE (LTE-U), re-branded as LTE-LAA many times on this blog and the 3G4G Small Cells blog. In fact some analysts have decided to call the current Rel-12 non-standardised Rel-12 version as LTE-U and the standardised version that would be available as part of Release-13 as LTE-LAA.

There is a lot of unease in the WiFi camp because LTE-LAA may hog the 5GHz spectrum that is available as license-exempt for use of Wi-Fi and other similar (future) technologies. Even though LAA may be more efficient as claimed by some vendors, it would reduce the usage for WiFi users in that particular spectrum.

As a result, some vendors have recently proposed LTE/WiFi Link Aggregation as a new feature in Release-13. Alcatel-Lucent, Ruckus Wireless and Qualcomm have all been promoting this. In fact Qualcomm has a pre-MWC teaser video on Youtube. The demo video is embedded as follows:



The Korean operator KT was also involved in demoing this in MWC along with Samsung and Qualcomm. They have termed this feature as LTE-Hetnet or LTE-H.

The Korean analyst firm Netmanias have more detailed technical info on this topic.

Link aggregation by LTE-H demonstrated at MWC 2015 (Source: Netmanias)

As can be seen the data is split/combined in PDCP layer. While this example above shows the practical implementation using C-RAN with Remote Radio Head (RRH) and BaseBand Unit (BBU) being used, the picture at the top shows LTE Anchor in eNodeB. There would be a need for an ideal backhaul to keep latency in the eNodeB to minimum when combining cellular and WiFi data.

Comparison of link level Carrier Aggregation technologies (Source: Netmanias)

The above table shows comparison between the 3 main techniques for increasing data rates through aggregation; CA, LTE-U/LAA and LTE-H/LWA. While CA has been part of 3GPP Release-10 and is available in more of less all new LTE devices, LTE-U and LTE-H is new and would need modifications in the network as well as in the devices. LTE-H would in the end provide similar benefits to LTE-U but is a safer option from devices and spectrum point of view and would be a more agreeable solution by everyone, including the WiFi community.

A final word; last year we wrote a whitepaper laying out our vision of what 4.5G is. I think we put it simply that in 4.5G, you can use WiFi and LTE at the same time. I think LTE-H fulfills that vision much better than other proposals.

Detailed whitepaper on Carrier Aggregation by 4G Americas

4G Americas has published a detailed whitepaper on Carrier Aggregation (CA). Its a very good detailed document for anyone wishing to study CA.

Two very important features that have come as part of CA enhancements were the multiple timing advance values that came as a part of Release-11 and TDD-FDD joint operation that came part of Release-12

While its good to see that up to 3 carriers CA is now possible as part of Rel-12 and as I mentioned in my last post, we need this to achieve the 'Real' 4G. We have to also remember at the same time that these CA makes the chipsets very complex and may affect the sensitivity of the RF receivers.

Anyway, here is the 4G Americas whitepaper.

LTE Carrier Aggregation Technology Development and Deployment Worldwide from Zahid Ghadialy

You can read more about the 4G Americas whitepaper in their press release here.

Observed Time Difference Of Arrival (OTDOA) Positioning in LTE

Its been a while I wrote anything on Positioning. The network architecture for the positioning entities can be seen from my old blog post here. 

Qualcomm has recently released a whitepaper on the OTDOA (Observed Time Difference Of Arrival) positioning. Its quite a detailed paper with lots of technical insights.

There is also signalling and example of how reference signals are used for OTDOA calculation. Have a look at the whitepaper for detail, embedded below.

Observed Time Difference Of Arrival (OTDOA) Positioning in 3GPP LTE from Zahid Ghadialy

HSPA+ Carrier Aggregation

Came across Qualcomm's HSPA+ Carrier aggregation video (above) and whitepaper. Interesting to see that HSPA/HSPA+ is still growing. As per my earlier post, half of the connections in 2018 would be HSPA/HSPA+.

As can be seen in the picture above, there are quite a few features that may be of interest to the operators. Scalable UMTS is one such feature as I have put in the blog before.

You will notice that upto 4 bands can be aggregated. It would be interesting to see which operators have these bands available and if they would be willing to use HSPA+ CA with upto 4 bands. The presentation by Qualcomm is embedded below and is available to download from here.

Related posts:

• Multipoint HSDPA / HSPA
• HSDPA multiflow data transmission

Quick summary on LTE and UMTS / HSPA Release-12 evolution by 3GPP

A quick summary from 3GPP about the Release-12 progress (Jun. 2014 release planned) from the recent ETSI Future Mobile Summit. Presentation and video embedded below

LTE TDD - universal solution for unpaired spectrum?

TDD deployments are gathering pace. An earlier GSA report I posted here, highlighted the many devices that are TD-LTE ready.

The main thing that is being emphasised is that from the standards point of view, not much additional efforts are required for a TDD device as compared to an FDD device. Of course in practice the physical layer would be different and that could be a challenge in itself.

Qualcomm published a presentation on this topic that is embedded below. Available to download from here.

Our World Without Mobile :-)

Present and Future Technologies for Internet of Things (IoT)

An Interesting presentation from our Future of Wireless Conference (#FWIC2013) in Cambridge earlier this month. A question being asked is what technology will be used for Internet of Things (IoT) or Internet of Everything (IoE) as its also referred to nowadays. These 3 slides below summarises what technologies are see applicable to which scenarios.

Complete slides are embedded below and if you like to see the video, its available here.

Mapping the Future of the Internet of (Every)Thing(s) from Zahid Ghadialy

eMBMS rollouts gathering steam in 2013

Its been a while since I last posted something on eMBMS. Its been even longer that we saw anything official from 3GPP on eMBMS. Recently I have seen some operators again starting to wonder if eMBMS makes business sense, while the vendors and standards are still working hard on the technology.

Not so long back, HEVC/H.265 codec was standardised. This codec helps transmission of the video using half the bandwidth. This means that it would be economical to use this for broadcast technologies. No wonder Nokia, Thompson and NTT Docomo are excited.

Interesting picture from a Qualcomm presentation (embedded in the end) shows how different protocols fit in the eMBMS architecture. My guess would be that the HEVC  may be part of the Codecs.

On the operators front, Korea Telecom (KT) has intentions for countrywide rollout. Korea is one of the very few countries where end users have embraced watching video on small form factors. Verizon wireless has already signalled the intention to rollout eMBMS in 2014; its working out a business case. Telenor Sweden is another player to join the band with the intention of adopting Ericsson's Multi screen technology.

One of the main reasons for the lack of support for the 3G MBMS technology was not a compelling business case. Qualcomm has a whitepaper that outlines some of the potential of LTE Broadcast technology here. A picture from this whitepaper on the business case below:

Finally, a presentation from Qualcomm research on eMBMS embedded below:

LTE eMBMS Technology Overview from Zahid Ghadialy

Scalable UMTS (S-UMTS) to accelerate GSM Refarming

Looks like a good idea from LTE will possibly be applied to UMTS/HSPA and it will also help accelerate the re-farming of GSM spectrum. A recent presentation from Qualcomm below:

Available to download from here.

Videos from the CES 2013

Gorilla glass (above) is made by a company called Corning that is much more well known for its futuristic video, see here.











Finally, this Sony Xperia Z has got over 2 million hits, not exactly sure why so I have added the video for this as well

CSFB Performance

Here is another presentation from Qualcomm from the '4G World'.

CSFB Performance from Zahid Ghadialy

With regards to SI Tunneling mentioned in the presentation, I found the following in another Qualcomm whitepapers:


With Release 9 Enhanced Release with Redirection—SI Tunneling, the device follows 3GPP release 9, where SIB information can be tunneled from the target Radio Access Network (RAN) via the core network to the source RAN and be included in the redirection message sent to the device. This can avoid reading any SIBs on the target cell. 

The predominant solutions deployed today are based on Release 8 Release with Redirection — SIB Skipping, in order to achieve good call setup times, good reliability, and simplify deployments. It is anticipated that Release 9 Enhanced Release with Redirection will be deployed in the near future. At this time, there is not as much push for handover-based CSFB since both Release 8 Release with Redirection—SIB Skipping and Release 9 Enhanced Release with Redirection—SI Tunneling have largely addressed any call setup time issues that may have existed with the Basic Release with Redirection solution.

I have blogged on this topic before, here.

More on Dual Radio here and SVLTE here.