How Mobile is Enabling Tech to Outgrow the Tech Industry from Andreessen Horowitz on Vimeo.
And a recent interview by Benedict Evans with Bloomberg TV on the same topic as follows:
Sunday 16 November 2014
Is mobile eating the world?
How Mobile is Enabling Tech to Outgrow the Tech Industry from Andreessen Horowitz on Vimeo.
And a recent interview by Benedict Evans with Bloomberg TV on the same topic as follows:
Tuesday 11 November 2014
New Spectrum Usage Paradigms for 5G
Sometime back I wrote a post that talked about Dynamic Spectrum Access (DSA) techniques for Small Cells and WiFi to work together in a fair way. The Small Cells would be using the ISM bands and Wi-Fi AP's would also be contending for the same spectrum. For those who may not know, this is commonly referred to as LTE-U but the correct term that is being used in standards is LA-LTE, see here for details.
IEEE Comsoc has just published a whitepaper that details how the spectrum should be handled in 5G to make sure of efficient utilisation. The whitepaper covers the following:
Chapter 2 – Introduction, the traditional approach of repurposing spectrum and allocating it to Cellular Wireless systems is reaching its limits, at least below the 6GHz threshold. For this reason, novel approaches are required which are detailed in the sequel of this White Paper.
Chapter 3 - Spectrum Scarcity - an Alternate View provides a generic view on the spectrum scarcity issue and discusses key technologies which may help to alleviate the problem, including Dynamic Spectrum Management, Cognitive Radios, Cognitive Networks, Relaying, etc.
Chapter 4 – mmWave Communications in 5G addresses a first key solution. While spectrum opportunities are running out at below 6 GHz, an abundance of spectrum is available in mmWave bands and the related technology is becoming mature. This chapter addresses in particular the heterogeneous approach in which legacy wireless systems are operated jointly with mmWave systems which allows to combine the advantages of both technologies.
Chapter 5 – Dynamic Spectrum Access and Cognitive Radio: A Current Snapshot gives a detailed overview on state-of-the-art dynamic spectrum sharing technology and related standards activities. The approach is indeed complementary to the upper mmWave approach, the idea focuses on identifying unused spectrum in time, space and frequency. This technology is expected to substantially improve the usage efficiency of spectrum, in particular below the 6GHz range.
Chapter 6 – Licensed Shared Access (LSA) enables coordinated sharing of spectrum for a given time period, a given geographic area and a given spectrum band under a license agreement. In contract to sporadic usage of spectrum on a secondary basis, the LSA approach will guarantee Quality-of-Service levels to both Incumbents and Spectrum Licensees. Also, a clear business model is available through a straightforward license transfer from relevant incumbents to licensees operating a Cellular Wireless network in the concerned frequency bands.
Chapter 7 – Radio Environment Map details a technology which allows to gather the relevant (radio) context information which feed related decision making engines in the Network Infrastructure and/or Mobile Equipment. Indeed, tools for acquiring context information is critical for next generation Wireless Communication systems, since they are expected to be highly versatile and to constantly adapt.
Chapter 8 – D2DWRAN: A 5G Network Proposal based on IEEE 802.22 and TVWS discusses the efficient exploitation of TV White Space spectrum bands building on the available IEEE 802.22 standard. TV White Spaces are indeed located in highly appealing spectrum bands below 1 GHz with propagation characteristics that are perfectly suited to the need of Wireless Communication systems.
Chapter 9 – Conclusion presents some final thoughts.
The paper is embedded as follows:
Chapter 2 – Introduction, the traditional approach of repurposing spectrum and allocating it to Cellular Wireless systems is reaching its limits, at least below the 6GHz threshold. For this reason, novel approaches are required which are detailed in the sequel of this White Paper.
Chapter 3 - Spectrum Scarcity - an Alternate View provides a generic view on the spectrum scarcity issue and discusses key technologies which may help to alleviate the problem, including Dynamic Spectrum Management, Cognitive Radios, Cognitive Networks, Relaying, etc.
Chapter 4 – mmWave Communications in 5G addresses a first key solution. While spectrum opportunities are running out at below 6 GHz, an abundance of spectrum is available in mmWave bands and the related technology is becoming mature. This chapter addresses in particular the heterogeneous approach in which legacy wireless systems are operated jointly with mmWave systems which allows to combine the advantages of both technologies.
Chapter 5 – Dynamic Spectrum Access and Cognitive Radio: A Current Snapshot gives a detailed overview on state-of-the-art dynamic spectrum sharing technology and related standards activities. The approach is indeed complementary to the upper mmWave approach, the idea focuses on identifying unused spectrum in time, space and frequency. This technology is expected to substantially improve the usage efficiency of spectrum, in particular below the 6GHz range.
Chapter 6 – Licensed Shared Access (LSA) enables coordinated sharing of spectrum for a given time period, a given geographic area and a given spectrum band under a license agreement. In contract to sporadic usage of spectrum on a secondary basis, the LSA approach will guarantee Quality-of-Service levels to both Incumbents and Spectrum Licensees. Also, a clear business model is available through a straightforward license transfer from relevant incumbents to licensees operating a Cellular Wireless network in the concerned frequency bands.
Chapter 7 – Radio Environment Map details a technology which allows to gather the relevant (radio) context information which feed related decision making engines in the Network Infrastructure and/or Mobile Equipment. Indeed, tools for acquiring context information is critical for next generation Wireless Communication systems, since they are expected to be highly versatile and to constantly adapt.
Chapter 8 – D2DWRAN: A 5G Network Proposal based on IEEE 802.22 and TVWS discusses the efficient exploitation of TV White Space spectrum bands building on the available IEEE 802.22 standard. TV White Spaces are indeed located in highly appealing spectrum bands below 1 GHz with propagation characteristics that are perfectly suited to the need of Wireless Communication systems.
Chapter 9 – Conclusion presents some final thoughts.
The paper is embedded as follows:
Wednesday 5 November 2014
2015 will finally be the year of Voice over LTE (VoLTE)
On 4th Nov. 2009, the One Voice initiative was published by 12 companies including AT&T, Orange, Telefonica, TeliaSonera, Verizon, Vodafone, Alcatel-Lucent, Ericsson, Nokia Siemens Networks, Nokia, Samsung and Sony Ericsson. These all agreed that the IMS based solution, as defined by 3GPP, is the most applicable approach to meet their consumers expectations for service quality, reliability and availability when moving from existing CS based voice services to IP based LTE services.
On 15th Feb 2010, GSMA announced that it has adopted the work of the One Voice initiative to drive the global mobile industry towards a standard way of delivering voice and messaging services for LTE. The GSMA’s VoLTE initiative was supported by more than 40 organisations from across the mobile ecosystem, including many of the world’s leading mobile communication service providers, handset manufacturers and equipment vendors, all of whom support the principle of a single, IMS-based voice solution for next-generation mobile broadband networks. This announcement was also supported by 3GPP, Next Generation Mobile Networks alliance (NGMN) and the International Multimedia Teleconferencing Consortium (IMTC).
As per GSA: 71 operators are investing in VoLTE studies, trials or deployments, including 11 that have commercially launched HD voice service. The number of HD voice launches enabled by VoLTE is forecast to reach 19 by end-2014 and then double in 2015. In July 2014 GSA confirmed 92 smartphones (including carrier and frequency variants) support VoLTE, including products by Asus, Huawei, LG, Pantech, Samsung and Sony Mobile. The newly-announced Apple iPhone 6 & 6 Plus models support VoLTE.
Things are also moving quickly with many operators who have announced VoLTE launches and are getting more confident day by day. Du, Dubai recently announced Nokia as VoLTE partner. KDDI, Japan is launching au VoLTE in December. Telstra, Australia has already been doing trials and plans to launch VoLTE network in 2015. Finally, Verizon and AT&T will have interoperable VoLTE calls in 2015.
Below is my summary from the LTE Voice Summit 2014. Let me know if you like it.
Saturday 1 November 2014
4G Security and EPC Threats for LTE
Thursday 30 October 2014
Codecs and Quality across VoLTE and OTT Networks
Codecs play an important role in our smartphones. Not only are they necessary and must for encoding/decoding the voice packets but they increase the price of our smartphones too.
A $400 smartphone can have as much as $120 in IPR fees. If you notice in the picture above its $10.60 for the H.264 codec. So its important that the new codecs that will come as part of new generation of mobile technology is free, open source or costs very little.
The new standards require a lot of codecs, some for backward compatibility but this can significantly increase the costs. Its important to make sure the new codecs selected are royalty-free or free license.
The focus of this post is a presentation by Amir Zmora from AudioCodecs in the LTE Voice Summit. The presentation below may not be self-explanatory but I have added couple of links at the bottom of the post where he has shared his thoughts. Its worth a read.
A good explanation of Voice enhancement tools as follows (slide 15):
Adaptive Jitter Buffer (AJB) – Almost all devices today (Smartphones, IP phones, gateways, etc.) have built in jitter buffers. Legacy networks (which were LAN focused when designed) usually have older devices with less sophisticated jitter buffers. When designed they didn’t take into account traffic coming in from networks such as Wi-Fi with its frequent retransmissions and 3G with its limited bandwidth, in which the jitter levels are higher than those in wireline networks. Jitter buffers that may have been planned for, say, dozens of msec may now have to deal with peaks of hundreds of msec. Generally, if the SBC has nothing to mediate (assume the codecs are the same and the Ptime is the same on both ends) it just forwards the packets. But the unexpected jitter coming from the wireless network as described above, requires the AJB to take action. And even if the network is well designed to handle jitter, today’s OTT applications via Smart Phones add yet another variable to the equation. There are hundreds of such devices out there, and the audio interfaces of these devices (especially those of the Android phones) create jitter that is passed into the network. For these situations, too, the AJB is necessary.
To overcome this issue, there is a need for a highly advanced Adaptive Jitter Buffer (AJB) built into the SBC that neutralizes the incoming jitter so that it is handled without problem on the other side. The AJB can handle high and variable jitter rates.
Additionally, the AJB needs to work in what is called Tandem scenarios where the incoming and outgoing codec is the same. This scenario requires an efficient solution that will minimize the added delay. AudioCodes has built and patented solutions supporting this scenario.
Transcoding – While the description above discussed the ability to bypass the need to perform transcoding in the Adaptive Jitter Buffer context, there may very well be a need for transcoding between the incoming and outgoing packet streams. Beyond being able to mediate between different codecs on the different networks on either end of the SBC, the SBC can transcode an incoming codec that is less resilient to packet loss (such as narrowband G.729 or wideband G.722) to a more resilient codec (such as Opus). By transcoding to a more resilient codec, the SBC can lower the effects of packet loss. Transcoding can also lower the bandwidth on the network. Additionally, the SBC can transcode from narrowband (8Khz) to wideband (16Khz) (and vice versa) as well as wideband transcoding, where both endpoints support wideband codecs but are not using the same ones. For example, a wireless network may be using the AMR wideband codec while the wireline network on the other side may be using Opus. Had it not been for the SBC, these two networks would have negotiated a common narrowband codec.
Flexible RTP Redundancy – The SBC can also use RTP redundancy in which voice packets are sent several times to ensure they are received. Redundancy is used to balance networks which are characterized by high packet loss burst. While reducing the effect of packet loss, Redundancy increases the bandwidth (and delay). There are ways to get around this bandwidth issue that are supported by the SBC. One way is by sending only partial packet information (not fully redundant packets). The decoder on the receiving side will know how to handle the partial information. This process is called Forward Error Correction (FEC).
Transrating – Transrating is the process of having more voice payload ‘packed’ into a single RTP packet by increasing the packet intervals, thus changing the Packetization Time or Ptime. Ptime is the time represented by the compression of the voice signals into packets, generally at 20 msec intervals. In combining the payloads of two or more packets into one, the Transrating process causes a reduction in the overhead of the IP headers, lowering the bandwidth and reducing the stress on the CPU resources, however, it increases delay. It thus can be used not only to mediate between two end devices using different Ptimes, but also as a means of balancing the network by reducing bandwidth and reducing CPU pressure during traffic peaks.
Quality-based Routing – Another tool used by the SBC is Quality-based routing. The SBC, which is monitoring all the calls on the network all the time, can decide (based on pre-defined thresholds and parameters) to reroute calls over different links that have better quality.
Further reading:
The new standards require a lot of codecs, some for backward compatibility but this can significantly increase the costs. Its important to make sure the new codecs selected are royalty-free or free license.
The focus of this post is a presentation by Amir Zmora from AudioCodecs in the LTE Voice Summit. The presentation below may not be self-explanatory but I have added couple of links at the bottom of the post where he has shared his thoughts. Its worth a read.
A good explanation of Voice enhancement tools as follows (slide 15):
Adaptive Jitter Buffer (AJB) – Almost all devices today (Smartphones, IP phones, gateways, etc.) have built in jitter buffers. Legacy networks (which were LAN focused when designed) usually have older devices with less sophisticated jitter buffers. When designed they didn’t take into account traffic coming in from networks such as Wi-Fi with its frequent retransmissions and 3G with its limited bandwidth, in which the jitter levels are higher than those in wireline networks. Jitter buffers that may have been planned for, say, dozens of msec may now have to deal with peaks of hundreds of msec. Generally, if the SBC has nothing to mediate (assume the codecs are the same and the Ptime is the same on both ends) it just forwards the packets. But the unexpected jitter coming from the wireless network as described above, requires the AJB to take action. And even if the network is well designed to handle jitter, today’s OTT applications via Smart Phones add yet another variable to the equation. There are hundreds of such devices out there, and the audio interfaces of these devices (especially those of the Android phones) create jitter that is passed into the network. For these situations, too, the AJB is necessary.
To overcome this issue, there is a need for a highly advanced Adaptive Jitter Buffer (AJB) built into the SBC that neutralizes the incoming jitter so that it is handled without problem on the other side. The AJB can handle high and variable jitter rates.
Additionally, the AJB needs to work in what is called Tandem scenarios where the incoming and outgoing codec is the same. This scenario requires an efficient solution that will minimize the added delay. AudioCodes has built and patented solutions supporting this scenario.
Transcoding – While the description above discussed the ability to bypass the need to perform transcoding in the Adaptive Jitter Buffer context, there may very well be a need for transcoding between the incoming and outgoing packet streams. Beyond being able to mediate between different codecs on the different networks on either end of the SBC, the SBC can transcode an incoming codec that is less resilient to packet loss (such as narrowband G.729 or wideband G.722) to a more resilient codec (such as Opus). By transcoding to a more resilient codec, the SBC can lower the effects of packet loss. Transcoding can also lower the bandwidth on the network. Additionally, the SBC can transcode from narrowband (8Khz) to wideband (16Khz) (and vice versa) as well as wideband transcoding, where both endpoints support wideband codecs but are not using the same ones. For example, a wireless network may be using the AMR wideband codec while the wireline network on the other side may be using Opus. Had it not been for the SBC, these two networks would have negotiated a common narrowband codec.
Flexible RTP Redundancy – The SBC can also use RTP redundancy in which voice packets are sent several times to ensure they are received. Redundancy is used to balance networks which are characterized by high packet loss burst. While reducing the effect of packet loss, Redundancy increases the bandwidth (and delay). There are ways to get around this bandwidth issue that are supported by the SBC. One way is by sending only partial packet information (not fully redundant packets). The decoder on the receiving side will know how to handle the partial information. This process is called Forward Error Correction (FEC).
Transrating – Transrating is the process of having more voice payload ‘packed’ into a single RTP packet by increasing the packet intervals, thus changing the Packetization Time or Ptime. Ptime is the time represented by the compression of the voice signals into packets, generally at 20 msec intervals. In combining the payloads of two or more packets into one, the Transrating process causes a reduction in the overhead of the IP headers, lowering the bandwidth and reducing the stress on the CPU resources, however, it increases delay. It thus can be used not only to mediate between two end devices using different Ptimes, but also as a means of balancing the network by reducing bandwidth and reducing CPU pressure during traffic peaks.
Quality-based Routing – Another tool used by the SBC is Quality-based routing. The SBC, which is monitoring all the calls on the network all the time, can decide (based on pre-defined thresholds and parameters) to reroute calls over different links that have better quality.
Thursday 23 October 2014
Detailed whitepaper on Carrier Aggregation by 4G Americas
Two very important features that have come as part of CA enhancements were the multiple timing advance values that came as a part of Release-11 and TDD-FDD joint operation that came part of Release-12
Anyway, here is the 4G Americas whitepaper.
LTE Carrier Aggregation Technology Development and Deployment Worldwide from Zahid Ghadialy
You can read more about the 4G Americas whitepaper in their press release here.
You can read more about the 4G Americas whitepaper in their press release here.
Sunday 19 October 2014
What is (pre-5G) 4.5G?
Before we look at what 4.5G is, lets look at what is not 4.5G. First and foremost, Carrier Aggregation is not 4.5G. Its the foundation for real 4G. I keep on showing this picture on Twitter
I am sure some people much be really bored by this picture of mine that I keep showing. LTE, rightly referred to as 3.9G or pre-4G by the South Korean and Japanese operators was the foundation of 'Real' 4G, a.k.a. LTE-Advanced. So who has been referring to LTE-A as 4.5G (and even 5G). Here you go:
So lets look at what 4.5G is.
Back in June, we published a whitepaper where we referred to 4.5G as LTE and WiFi working together. When we refer to LTE, it refers to LTE-A as well. The standards in Release-12 allow simultaneous use of LTE(-A) and WiFi with selected streams on WiFi and others on cellular.
Some people dont realise how much spectrum is available as part of 5GHz, hopefully the above picture will give an idea. This is exactly what has tempted the cellular community to come up with LTE-U (a.k.a LA-LTE, LAA)
In a recent event in London called 5G Huddle, Alcatel-Lucent presented their views on what 4.5G would mean. If you look at the slide above, it is quite a detailed view of what this intermediate step before 5G would be. Some tweets related to this discussion from 5G Huddle as follows:
While in Alcatel-Lucent slide, I could visualise 4.5G as our vision of LTE(-A) + WiFi + some more stuff, I am finding it difficult to visualise all the changes being proposed by Huawei. How are we going to see the peak rate of 10Gbps for example?
I have to mention that I have had companies that have told me that their vision of 5G is M2M and D2D so Huawei is is not very far from reality here.
We should keep in mind that this 4G, 4.5G and 5G are the terms we use to make the end users aware of what new cellular technology could do for them. Most of these people understand simple terms like speeds and latency. We may want to be careful what we tell them as we do not want to make things confusing, complicated and make false promises and not deliver on them.
xoxoxo Added on 2nd January 2015 oxoxox
Chinese vendor ZTE has said it plans to launch a ‘pre-5G’ testing base station in 2015, commercial use of which will be possible in 2016, following tests and adjustment. Here is what they think pre-5G means:
I am sure some people much be really bored by this picture of mine that I keep showing. LTE, rightly referred to as 3.9G or pre-4G by the South Korean and Japanese operators was the foundation of 'Real' 4G, a.k.a. LTE-Advanced. So who has been referring to LTE-A as 4.5G (and even 5G). Here you go:
Got 4G? Wake up, grandad. We're doing 4.5G LTE-A in London - EE chief: And get a load of our gleaming voice system! … http://t.co/78HSHlyPuA
— The Register (@TheRegister) March 5, 2014
Voda UK PR says: "The new technology, called Carrier Aggregation but also referred to as LTE Advanced or 4.5G" 4.5G?
— Keith Dyer (@keithdyer) October 15, 2014
5G wireless technology LTE-Advanced is now running in the Philippines' largest and strongest network. | http://t.co/g8u3lJ8sLV #Smart5G
— Smart Communications (@SMARTCares) August 14, 2014
So lets look at what 4.5G is.
Some people dont realise how much spectrum is available as part of 5GHz, hopefully the above picture will give an idea. This is exactly what has tempted the cellular community to come up with LTE-U (a.k.a LA-LTE, LAA)
Good points: 4.5G as necessary step: CA, VoLTE & WebRTC, CoMP & coordination, NFV & cloud. But that can do everything we need #5GHuddle
— Real Wireless (@real_wireless) September 23, 2014
So 5G will be evolution of 4.5G using DC & CA - but much better signalling, more energy efficient as new air interface for IoT
— Real Wireless (@real_wireless) September 23, 2014
Finally, in a recent GSMA event, Huawei used the term 4.5G to set out their vision and also propose a time-frame as follows:While in Alcatel-Lucent slide, I could visualise 4.5G as our vision of LTE(-A) + WiFi + some more stuff, I am finding it difficult to visualise all the changes being proposed by Huawei. How are we going to see the peak rate of 10Gbps for example?
I have to mention that I have had companies that have told me that their vision of 5G is M2M and D2D so Huawei is is not very far from reality here.
We should keep in mind that this 4G, 4.5G and 5G are the terms we use to make the end users aware of what new cellular technology could do for them. Most of these people understand simple terms like speeds and latency. We may want to be careful what we tell them as we do not want to make things confusing, complicated and make false promises and not deliver on them.
xoxoxo Added on 2nd January 2015 oxoxox
Chinese vendor ZTE has said it plans to launch a ‘pre-5G’ testing base station in 2015, commercial use of which will be possible in 2016, following tests and adjustment. Here is what they think pre-5G means:
Tuesday 14 October 2014
'Real' Full Duplex (or No Division Duplex - NDD?)
One of the technologies being proposed for 5G is referred to as Full Duplex. Here, the transmitter and the receiver both transmit and receive at the same frequency. Due to some very clever signal processing, the interference can be cancelled out. An interesting presentation from Kumu networks is embedded below:
Saturday 11 October 2014
A quick update on Antennas
Thursday 2 October 2014
Envelope Tracking for improving PA efficiency of mobile devices
For people who are interested in testing this feature may want to check this Rohde&Schwarz presentation here.
Subscribe to:
Posts (Atom)
